If you can moved the dongle to a windows machine and run SDRSharp or if you have GQRX installed on the RPI run that. Tune to the frequency and verify the strength of the signal. Just to make sure you are receiving a strong signal.
On Saturday, December 14, 2019 at 1:46:14 PM UTC-5, Gert Andersen wrote: > > Hi > > I have tried to find sensors with this command: > rtl_433 -f 868M -s 1024k -M utc -F json -R 78 > > But I don't find any sensors, just > pulse_FSK_detect(): Maximum number of pulses reached? > > I have attached a screenshot. > > Any ideas. > > Rgds > Gert > > > On Thursday, December 12, 2019 at 11:48:22 AM UTC+1, Gert Andersen wrote: >> >> Hi >> >> I'm new to WeeWx and I'm trying to install the SDR software. I have >> followed this guide https://github.com/weewx/weewx/wiki/sdr-rpi-recipe. >> I get an error as You can see on the screenshot. >> >> It is the first time I'm using the SDR software, so I really don't know >> where to look. >> >> Any ideas and thanks for your help? >> >> Rgds >> Gert >> > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/83be890f-ae85-48a9-a13e-2ce5cfb8f694%40googlegroups.com.
