Hi Ian Thanks for the tip, unfortunately the solution did not help me with the wrong rain data. Currently I have 5637.8mm in Today's Rain(it's not raining) and increasing all the time. The Rain Rate is also wrong.
Gert Website <http://vejret.lynghuzed.dk> On Wednesday, December 18, 2019 at 1:43:58 AM UTC+1, steeple ian wrote: > > I have noticed just recently several users experiencing difficulties with > the SDR driver, either with initial setup, inexplicable sensor data or > general connectivity problems etc. > > I recently experienced an issue myself. I was recently given a new > RaspberryPi 4 and took the opportunity to do a clean install of everything. > One of my weather stations has two sensor groups, outdoors and indoors > which worked perfectly on my existing setup, but with the new setup, the > SDR driver refused to work with the indoor sensor group. By a process of > elimination, I came to the conclusion that a recent update to rtl_433 was > the culprit, no surprise there! I eventually, quite by chance, I came > across this solution. > > My original setting in the SDR section of weewx.conf contained this: - > > cmd = rtl_433 -f 868M -s 1024k -M utc -F json -R 78 > > By adding -Y classic option: - > > cmd = rtl_433 -f 868M -s 1024k -M utc -F json -R 78 -Y > classic > > The issue was resolved. > > > I am not saying that is a solution for every SDR issue, far from it, but > it may save somebody the hours of frustration that I had. > > Ian > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/7720d7e5-4204-4867-b8bc-0e1d164bea6a%40googlegroups.com.
