On Wednesday, December 18, 2019 at 6:15:56 PM UTC-5, dhimelic wrote: > > I have a Acurite 01019M weather station and purchased a Nooelec nesdr mini > usb rtl-sdr & Ads-B receiver set. I am using a Raspberry Pi 3 mode b > running Debian. Trying to upload my weather data to Weatherunderground. Is > the 01019M compatible with the Nooelec nesdr? >
the console is a receiver. it is the instruments that transmit, and as far as i know, all of the acurite 5n1 instruments use the same wireless protocol, which can be received by the nooelec sdr. this guide shows how to do it: https://github.com/weewx/weewx/wiki/sdr-rpi-recipe > I don't see it on the hardware list and it doesn't seem to be working? My > AcuRite smart hub has reached its end of life and weewx seemed to give me > hope! Any advice? > unless you have some kind of hardware failure, the smart hub will work just fine with weewx. here is an overview: https://github.com/weewx/weewx/wiki/acuritebridge i would suggest the weewx-interceptor driver: https://github.com/matthewwall/weewx-interceptor see the section 'Example: Acurite Bridge in listen mode' in the readme as a starting point m -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/e2c2bd1a-9440-43ed-b0ac-1d8b3f19ff35%40googlegroups.com.
