Hi, I am one step ahead. It is, as already asumed, not the SKIN, but also not the WeeWX Installation.
I am running an OnPrem MQTT Brooker. But because I do not want to expose my Brooker to the World I am cloning the MQTT Message from WeeWX via NodeRed and forwarding them to ECLIPSE MQTT. In the weewx.conf I am setting the mqtt attributes for the SKIN to Eclipse MQTT. I think this worked fine. Now I have the following expericene: my internal MQTT Message is forwarded to Eclipse and eclipse is starting to reply back every 2 seconds alternating with the correct value und then with an incorrect value.... Br, Johannes Am Dienstag, 24. Dezember 2019 15:06:32 UTC+1 schrieb Johannes Ebner: > > Hi, > > I have Weewx with MQTT now running since one year but recently I have a > strange situation, or maybe I have just not recognized before: > > I have set my USB Driver for the Weatherstation to 1 minute and also the > Polling Intervall in Weewx to 1 minute. > > I have configured weewx to publish the values to my own MQTT Brooker. > > I can see every minute an update on the MQTT, but sometimes I see more > values within a couple of seconds. > What is strange is that e.g. for the temperature the first value is 6.1, > the second just 4 seconds later shows then 5.994234 and then again a couple > of seconds later I see again 6.1 > > Any ideas? > > Br, > Johannes > > > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/ff32af14-180c-4130-ade2-d5ec5911f4d4%40googlegroups.com.
