Hi Thanks for all the answers.
3 very different solutions and prices, which I find attractive and can be used with SDR. Maybe, in the future, there might be a driver to WeeWX, which can read data from Ecowiit GW1000 / Froggit DP1500. This unit has built-in barometer. 1) The solution from Adafruit, which needs to be soldered a bit 2) The Ecowiit solution with a 3-in-1 sensor 3) The solution with USB-BAR20-N. Assuming it can be put directly into the RPI Rgds Gert On Saturday, December 28, 2019 at 3:26:27 AM UTC+1, rich T wrote: > > I'm using this sensor. > https://www.amazon.com/Diymall-Pressure-Temperature-Sensor-Arduino/dp/B0118XCKTG > > Works fine for what I need it for. > > On Monday, December 23, 2019 at 5:40:55 PM UTC-5, Gert Andersen wrote: >> >> Hi >> I'm running a configuration with the Ecowitt GW1000/Froggit DP1500(no >> console) and some senors (rain, wind temp, etc). Data from these sensors >> are received via the weewx SDR driver and rtl_433. So the GW1000 is not >> seen by the SDR system and therefore no pressure data are received. >> >> Question, it it possible to add a pressure sensor, which can be seen from >> the SDR driver or is there another solution. >> >> Thanks >> Gert >> > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/e3d06f22-8a7b-4927-a475-576ed17c9562%40googlegroups.com.
