Why do I usually get this error on the console?
After the second or third attempt the info is listed?
sudo wee_device --info
Using configuration file /etc/weewx/weewx.conf
Using Vantage driver version 3.1.1 (weewx.drivers.vantage)
Unable to wake up console... sleeping
Unable to wake up console... retrying
Traceback (most recent call last):
File "/usr/bin/wee_device", line 66, in <module>
main()
File "/usr/bin/wee_device", line 62, in main
device.configure(config_dict)
File "/usr/share/weewx/weewx/drivers/__init__.py", line 69, in configure
self.do_options(options, parser, config_dict, prompt)
File "/usr/share/weewx/weewx/drivers/vantage.py", line 1973, in do_options
station = Vantage(**config_dict[DRIVER_NAME])
File "/usr/share/weewx/weewx/drivers/vantage.py", line 488, in __init__
self._setup()
File "/usr/share/weewx/weewx/drivers/vantage.py", line 1290, in _setup
unit_bits = self._getEEPROM_value(0x29)[0]
File "/usr/share/weewx/weewx/drivers/vantage.py", line 1376, in
_getEEPROM_value
raise weewx.RetriesExceeded("While getting EEPROM data value at address
0x%X" % offset)
weewx.RetriesExceeded: While getting EEPROM data value at address 0x29
syslog:
Jan 1 09:23:45 Wetter-Raspi weewx[3001]: vantage: SerialException on read.
Jan 1 09:23:45 Wetter-Raspi weewx[3001]: **** device reports readiness
to read but returned no data (device disconnected or multiple access on port
?)
Jan 1 09:23:45 Wetter-Raspi weewx[3001]: **** Is there a competing
process running??
Jan 1 09:23:45 Wetter-Raspi weewx[3001]: vantage: LOOP try #1; error:
device reports readiness to read but returned no data (device disconnected
or multiple access on port?)
Jan 1 09:23:45 Wetter-Raspi weewx[3001]: vantage: Requesting 200 LOOP
packets.
Jan 1 09:23:49 Wetter-Raspi weewx[3001]: vantage: Retry #0 failed
Jan 1 09:23:49 Wetter-Raspi wee_device[6419]: vantage: No <ACK> received
from console
Jan 1 09:23:49 Wetter-Raspi weewx[3001]: vantage: Rude wake up of console
successful
Jan 1 09:23:49 Wetter-Raspi weewx[3001]: vantage: No <ACK> received from
console
Jan 1 09:23:49 Wetter-Raspi weewx[3001]: vantage: LOOP try #2; error: No
<ACK> received from Vantage console
Jan 1 09:23:49 Wetter-Raspi weewx[3001]: vantage: Requesting 200 LOOP
packets.
Jan 1 09:23:49 Wetter-Raspi wee_device[6419]: vantage: No <ACK> received
from console
Jan 1 09:23:51 Wetter-Raspi weewx[3001]: vantage: Retry #0 failed
Jan 1 09:23:51 Wetter-Raspi weewx[3001]: vantage: SerialException on read.
Jan 1 09:23:51 Wetter-Raspi weewx[3001]: **** device reports readiness
to read but returned no data (device disconnected or multiple access on port
?)
Jan 1 09:23:51 Wetter-Raspi weewx[3001]: **** Is there a competing
process running??
Jan 1 09:23:51 Wetter-Raspi weewx[3001]: vantage: Retry #1 failed
Jan 1 09:23:55 Wetter-Raspi weewx[3001]: vantage: Retry #2 failed
Jan 1 09:23:55 Wetter-Raspi wee_device[6419]: vantage: SerialException on
read.
Jan 1 09:23:55 Wetter-Raspi wee_device[6419]: **** device reports
readiness to read but returned no data (device disconnected or multiple
access on port?)
Jan 1 09:23:55 Wetter-Raspi wee_device[6419]: **** Is there a
competing process running??
Jan 1 09:23:56 Wetter-Raspi weewx[3001]: vantage: Retry #3 failed
Jan 1 09:23:56 Wetter-Raspi weewx[3001]: vantage: Unable to wake up console
Jan 1 09:23:56 Wetter-Raspi weewx[3001]: vantage: LOOP try #3; error:
Unable to wake up Vantage console
Jan 1 09:23:56 Wetter-Raspi weewx[3001]: vantage: Requesting 200 LOOP
packets.
Jan 1 09:23:56 Wetter-Raspi wee_device[6419]: vantage: Unable to pass
CRC16 check while getting data
Jan 1 09:23:56 Wetter-Raspi wee_device[6419]: vantage: Max retries
exceeded while getting EEPROM data at address 0x29
Regards
Geni
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/weewx-user/79366e15-0131-4268-9d8e-bc7057480fe9%40googlegroups.com.
