On Wednesday, January 1, 2020 at 5:30:33 PM UTC-5, Stefanie Drucker wrote: > > Hi, > > I've bought a Mobile Alerts gateway and various sensors recently and want > to use it with weewx. > > This gateway is an European version of the LaCrosse GW-1000U. It looks > exactly the same, but obviously is different (see > https://github.com/sarnau/MMMMobileAlerts/blob/master/MobileAlertsELVvsLaCrosse.markdown > ). > > Anyone has the same weather station and managed to set up weewx receiving > data from it? >
you can try the weewx-interceptor driver: https://github.com/matthewwall/weewx-interceptor set the device_type=lacrosse-bridge the lacross bridge has a rather complicated protocol. try to configure as much as you can with the vendor's GAS program - at the very least you must tell the GW1000 to communicate with the computer that is running weewx (there is no passive sniffing mode for the lacross GW1000U). and please read the comments about GW1000U in the interceptor.py file. it is a bit technical, but you will probably have to tweak the serial number. finally, do not confuse the lacross GW1000U with the fine offset GW1000. froggit, ecowitt (and soon others?) sell the fine offset GW1000B and GW1000BU - 915MHz, the GW1000A - 868MHz, and the GW1000 - 433MHz. m -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/d9387800-443c-4518-b051-ef83e51525e8%40googlegroups.com.
