Yes, but I used the development version, not the stable. Am Freitag, 3. Januar 2020 17:43:25 UTC+1 schrieb Patrick Tranchant: > > > hello Johannes > did you can run Weewx 4.0b6 with skin Belchertown ? > tk > > patrick > > On Thursday, January 2, 2020 at 9:13:53 AM UTC+1, Johannes Ebner wrote: >> >> Hi, >> >> I have a funny issue with Weex and the Belchertown Skin. >> >> I had the following Setup: >> *) RPi Zero W >> *) Raspbian Jessy Lite >> *) Weewx 3.9.2 >> *) Belchertown Skin latest Beta >> >> So far everything works fine, but I noticed from time to time that the >> current weather status icon is not shown. >> Normaly you see the icon and if you check the link it looks like >> "/images/clear-day.png" >> >> But from time to time I see no icon and on the default browser error icon >> I can see the following url: "/images/" >> >> First I thought it is maybe due to the RPi Zero and to low performance so >> I took out the CFCard and moved it to a RPi 3 B+. >> As this didnt solve the issue I cleaned up the Weewx Config (removed some >> extensions which I didnt need anymore). Now I have only the MQTT and >> Belchertown Extension installed. >> Also the cleanup of the config didnt solve my issue. I was also not able >> to see any error messages in the logs. >> >> Now I have setup a complete new installation on a RPi 4+. I only took >> over the settings for Belchertown to weewx.conf and the graphs.conf for the >> Skin. At the moment I am using this setup with the simulator driver. >> The setup works basically except again the Weather Icon. This time it is >> never aperaing correctly... >> >> Any ideas or hints? >> >> Best Regards, >> Johannes >> >>
-- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/1308e0d4-45ee-476e-b2de-6c64853f40c2%40googlegroups.com.
