I'm running Weewx 3.9.2 / Belchertown skin 1.1b3 / MQTT enabled on RPI 3 with the Rtldavis driver , BME280, and AS3935. I archive data every 300 seconds without any issues.
On Friday, January 3, 2020 at 5:16:20 PM UTC-5, Pat wrote: > > I agree that Belchertown skin has a lot going on with it, but that > shouldn't delay weewx from saving the archive since the skin runs after the > archive is run. > > The only scenario I can think of where the skin would slow things down is > if the skin is running longer than 300s to generate the graph json files, > which is causing weewx to delay on the next archive interval. > > This was common on a Pi Zero in early versions of the skin (I haven't seen > it being reported in the last ~12 months though since updating the chart > json generator) > > > > On Friday, January 3, 2020 at 4:10:18 PM UTC-5, vince wrote: >> >> On Friday, January 3, 2020 at 12:41:08 PM UTC-8, Pat wrote: >>> >>> Side note: I'm a little lost on this one. Not sure why weewx isn't >>> saving records consistently every 300s. (Nothing to do with the skin). >>> Maybe something to do with the resources of the Pi being stretched thin? >>> >> >>> >> >> What model pi is it ? >> What other than weewx is running on it ? >> >> I'll have to check my tiny/weak Seagate Dockstar at home, but my >> recollection is that weewx not saving exactly on a 300s interval is not >> that unusual. Sometimes the skins take longer than at other times to >> process as well. Belchertown is a rather intensive skin to run from what >> I've seen. My recollection is the processing time for that one can be >> rather high compared with more minimal skins. >> > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/29d92f86-1d71-42db-8e36-8aab12a5e63b%40googlegroups.com.
