Just to make sure that this isn't a error caused by me I installed a fresh raspian and weewx with your driver and my Ambient connected to hostapd and the same error popped up for both libpcap and pypcap installed. All virgin here... the only change in that weewx.conf I made was changing the station type and adding hostpad to raspbian.
On Sunday, January 12, 2020 at 3:05:53 PM UTC-8, mwall wrote: > > On Sunday, January 12, 2020 at 5:47:18 PM UTC-5, Scott Grayban wrote: >> >> >> [StdWXCalculate] >> >> [[Calculations]] >> # Derived quantities are calculated by this service. Possible >> values are: >> # hardware - use the value provided by hardware >> # software - use the value calculated by weewx >> # prefer_hardware - use value provide by hardware if available, >> # otherwise use value calculated by weewx >> >> pressure = prefer_hardware >> barometer = prefer_hardware >> altimeter = prefer_hardware >> windchill = prefer_hardware >> heatindex = prefer_hardware >> dewpoint = prefer_hardware >> inDewpoint = prefer_hardware >> rainRate = prefer_hardware >> inHumidity = Inside Humidity >> > > probably not relevant to the interceptor, but 'Inside Humidity' is not a > valid parameter for the 'Calculations' stanza. > > now with debug=1, start up weewx and post the log from startup until > failure. > > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/2efb2eaa-fd99-4684-9c57-099078dda170%40googlegroups.com.
