It looks like the Weatherlink IP address is 00:1D:0A:00:BB:D1 (See attached picture) (Linux is so much easier than Windows 7 for screen captures)
Should I change the host = 192.168.0.143 statement in the conf file to host = 00:1D:0A:00:BB:D1 or would it be better to purge the current installation and then reinstall using 00:1D:0A:00:BB:D1 for the address? On Saturday, January 25, 2020 at 9:52:59 AM UTC-7, vince wrote: > > On Saturday, January 25, 2020 at 8:42:33 AM UTC-8, Bill Butler wrote: >> >> I've attached the conf file. My answers to the conf prompts look like >> what I entered. I'll get the IP address of the Weatherlink IP device when I >> have a chance. >> >> > Looks good other than the ip address being incorrect. > > I'd suggest changing debug=0 to debug=1 at least for a while. That'll > give more logging info if we need it. > > > >> A minor complication - Last night's "experiments" turned off my wife's >> TV/DVR recorder. It seems to be OK this morning, but the TV/DVR (from DISH) >> runs instructions thru the same router/home network that the computer uses. >> >> > Impossible to guess what you touched or how. The one thing I would say > is that you 'never' want to configure two computers with the same IP > address on the same network. That way causes lots of things to go very > irrevocably stupid. > > Figure out the ip address of you Weatherlink device, edit it in, restart > weewx, it should work fine.... > > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/a8c0bb11-7b8c-434a-ac9d-b932d4da0c5d%40googlegroups.com.
