I had assumed that since hourlyrainin and dailyrainin were present in the
source data that these were meant to be mapped somewhere - the log says
these are ignored (and have values in them). You are right that there was
no rainfall at the time, but you can see that there had been some since
midnight.
Looking at interceptor.py I find the lines you refer to at line 2359 (which
is also the line they are in the latest github version)
My weewx.config is pretty much verbatim - only just installed it and added
the interceptor sections as per the instructions (it only has the port and
the use of ecowitt-client) - it has no mapping extensions in
Looking at my archive table I can see rain_rate is populated with values,
but the rain column is NULL - so perhaps it is that the calculation is not
happening rather than the mapping is wrong?
On Tuesday, 28 January 2020 16:00:34 UTC, Vetti52 wrote:
>
> according to your data, there was no rain at that time. rain_rate is zero.
> rain_total is not provided by your console and will be calculated. I had
> the same problem, which is solved since version 0.51.
> When starting interceptor.py manually, you will see, how the sensors are
> labelled by your console.
>
> have a look into interceptor.py
>
> starting at line 2246
>
>> 'totalrainin': 'rain_total',
>> 'rainratein': 'rain_rate',
>>
>
> These lines made it for me. Since version 0.51 rain works fine. However,
> now there is wh65_battery missing in weewx. So, it is not yet perfect.
>
> Do you have any entries in weewx.conf?
>
>> [Interceptor]
>> [[sensor_map_extensions]]
>>
>
>
> Am Dienstag, 28. Januar 2020 07:40:19 UTC+1 schrieb James Berry:
>>
>> Looks like there was some rain since midnight, this is the log entry
>> being generated - looks like the rain total is being ignored and this could
>> be the reason?
>>
>> Jan 28 06:37:02 weather weewx[27613]: interceptor: MainThread:
>> unrecognized parameter windspdmph_avg10m=11.2
>> Jan 28 06:37:02 weather weewx[27613]: interceptor: MainThread: ignored
>> parameter hourlyrainin=0.000
>> Jan 28 06:37:02 weather weewx[27613]: interceptor: MainThread:
>> unrecognized parameter winddir_avg10m=258
>> Jan 28 06:37:02 weather weewx[27613]: interceptor: MainThread: ignored
>> parameter freq=433M
>> Jan 28 06:37:02 weather weewx[27613]: interceptor: MainThread: ignored
>> parameter yearlyrainin=0.921
>> Jan 28 06:37:02 weather weewx[27613]: interceptor: MainThread: ignored
>> parameter dailyrainin=0.106
>> Jan 28 06:37:02 weather weewx[27613]: interceptor: MainThread: ignored
>> parameter stationtype=EasyWeatherV1.4.6
>> Jan 28 06:37:02 weather weewx[27613]: interceptor: MainThread: ignored
>> parameter weeklyrainin=0.488
>> Jan 28 06:37:02 weather weewx[27613]: interceptor: MainThread: raw
>> packet: {'wind_speed': 10.5, 'humidity_in': 46.0, 'temperature_in': 67.5,
>> 'solar_radiation': 0.0, 'wind_gust': 15.9, 'wh65_battery': 0.0,
>> 'humidity_out': 87.0, 'uv': 0.0, 'dateTime': 1580193420, 'pressure':
>> 29.106, 'temperature_out': 37.9, 'wind_dir': 274.0, 'wh25_battery': 0.0,
>> 'rain_rate': 0.0, 'usUnits': 1}
>> Jan 28 06:37:02 weather weewx[27613]: interceptor: MainThread: mapped
>> packet: {'pressure': 29.106, 'outHumidity': 87.0, 'UV': 0.0, 'radiation':
>> 0.0, 'dateTime': 1580193420, 'windDir': 274.0, 'outTemp': 37.9,
>> 'windSpeed': 10.5, 'inHumidity': 46.0, 'inTemp': 67.5, 'windGust': 15.9,
>> 'rainRate': 0.0, 'usUnits': 1}
>>
>> On Tuesday, 28 January 2020 06:21:48 UTC, James Berry wrote:
>>>
>>> Hi Paul,
>>>
>>> /usr/share/weewx/user/interceptor.py dated Jan 16
>>> - DRIVER_VERSION = '0.52'
>>>
>>> I guess there must be a difference between the HP2551 and GW1000.
>>> I did see the current record rain_rate increase in the web page, but
>>> rain today did not, and the graph does not show any rainfall.
>>>
>>> I will attempt to increase the level of logging ahead of next rainfall
>>> to see if I can capture what is coming from the device.
>>>
>>> Best wishes
>>> James
>>>
>>>
>>> On Tuesday, 28 January 2020 03:41:22 UTC, Paul McGeorge wrote:
>>>>
>>>> Are you using the latest version .52?
>>>>
>>>> I am getting identical readings on ecowitt.net and Weewx with my
>>>> GW1000 and the latest version and no extra configuration for rain.
>>>>
>>>> On Monday, January 27, 2020 at 10:44:38 AM UTC-7, James Berry wrote:
>>>>>
>>>>> It has been raining here today. My HP2551 has uploaded rain to
>>>>> ecowitt.net and wu, but nothing has appeared in weewx. Looking at
>>>>> this perhaps the default config for the ecowitt-client needs some changes
>>>>> for me to get rain to be logged?
>>>>>
>>>>> Did you work out what to do?
>>>>>
>>>>> On Saturday, 18 January 2020 15:25:05 UTC, Vetti52 wrote:
>>>>>>
>>>>>>
>>>>>>
>>>>>> Am Montag, 13. Januar 2020 12:32:33 UTC+1 schrieb Vetti52:
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> Am Sonntag, 12. Januar 2020 22:01:36 UTC+1 schrieb mwall:
>>>>>>>>
>>>>>>>> On Sunday, January 12, 2020 at 7:23:30 AM UTC-5, Vetti52 wrote:
>>>>>>>>>
>>>>>>>>> This will make things a bit easier. However, I must confess, that
>>>>>>>>> I am sometimes a bit messy. So, when updating interceptor.py from
>>>>>>>>> your
>>>>>>>>> site, I will have to remember, on which parts I mades my
>>>>>>>>> modifications. So,
>>>>>>>>> for me it would be much easier, if all modifications could reside in
>>>>>>>>> a
>>>>>>>>> separate file. I am afraid, that realizing this would a hard job for
>>>>>>>>> now.
>>>>>>>>>
>>>>>>>>
>>>>>>>> the only modifications you should make are to the weewx
>>>>>>>> configuration file.
>>>>>>>>
>>>>>>>> m
>>>>>>>>
>>>>>>>
>>>>>>> Well, I followed the procedure of Stephen to import rain event:
>>>>>>>
>>>>>>> https://www.wxforum.net/index.php?topic=37471.msg386960#msg386960
>>>>>>>
>>>>>>> and additionally modified 'baromrelin': 'barometer', because my
>>>>>>> WS2900 has a very simple way to calculate "relative pressure" by just
>>>>>>> adding constantly 26.9 hPa to the measured "absolute pressure". For
>>>>>>> better
>>>>>>> comparison with official Weather Station data, I have changed the
>>>>>>> absolute
>>>>>>> pressure, so that the relative pressure meets the official data now.
>>>>>>> So,
>>>>>>> the absolute pressure is "wrong" and should not be the basis of
>>>>>>> calulation.
>>>>>>> At least not the way, it actually is.
>>>>>>>
>>>>>>> I am not sure, if both modifications could be entered into
>>>>>>> weewx.conf.
>>>>>>>
>>>>>>
>>>>>> Now, as it finally rains today, I have tried to modify weewx.conf
>>>>>> that way:
>>>>>>
>>>>>> [Interceptor]
>>>>>>> # This section is for the network traffic interceptor driver.
>>>>>>>
>>>>>>> # The driver to use:
>>>>>>> driver = user.interceptor
>>>>>>> device_type = ecowitt-client
>>>>>>> mode = listen
>>>>>>> port = 9000
>>>>>>> [[sensor_map_extensions]]
>>>>>>> baromrelin = barometer
>>>>>>> battery_wh65 = battery
>>>>>>> eventrainin = rain_event
>>>>>>> rain_event = rainEvent
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>> Rain is ok now. However, in Weewx current conditions barometer shows
>>>>>> a calculated value, derived from absolute pressure, not the adjusted
>>>>>> relative pressure, as expected. And the battery status is completely
>>>>>> gone
>>>>>> now. In addition, I detected an alien: "ET 0.0 mm". What is it???
>>>>>>
>>>>>> So, I went back to modify interceptor.py that way:
>>>>>> I introduced 'rainEvent': 'rain_event' into the DEFAULT_SENSOR_MAP in
>>>>>> class Consumer(object), introduced 'baromrelin': 'barometer', and
>>>>>> 'eventrainin': 'rain_event', in the LABEL_MAP of class
>>>>>> EcowittClient(Consumer) and commented out # 'baromrelin', 'eventrainin',
>>>>>> in
>>>>>> the adjacent IGNORED_LABELS.
>>>>>>
>>>>>> That works fine, except that again there is no battery status at all.
>>>>>> And still ET is here...
>>>>>>
>>>>>>
>>>>>>
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/weewx-user/2939ab6c-8a50-4437-a239-ea6e0f4b82e0%40googlegroups.com.
