Hi
Maybe something like this:
[Interceptor]
# This section is for the network traffic interceptor driver.
# The driver to use:
driver = user.interceptor
# Specify the hardware device to capture. Options include:
# acurite-bridge - acurite internet bridge, smarthub, or access
# observer - fine offset WH2600/HP1000/HP1003, ambient WS2902
# lw30x - oregon scientific LW301/LW302
# lacrosse-bridge - lacrosse GW1000U/C84612 internet bridge
# ecowitt-client - any hardware that uses the ecowitt protocol
# wu-client - any hardware that uses the weather underground protocol
device_type = ecowitt-client
port = 8000
[[sensor_map_extensions]]
outTemp = temperature_1
Gert
On Friday, February 21, 2020 at 5:40:33 AM UTC+1, Robert de Keijzer wrote:
>
> Hi,
>
> I have recently installed Weewx on a Raspberry Pi. I have an Ecowitt
> GW1000 and have installed the interceptor driver. I followed 'Collect data
> from the Ecowitt GW1000 WiFi bridge'
>
> I have perused the User guide and Custom guide to try and solve my query.
> However, I'm perplexed and need some guidance to resolve this little issue.
>
> A copy of the mylog attached.
>
> Basically I'm trying to populate 'Outside Temperature' instead of the
> records in 'Temperature1'
>
> A screen grab shown below is what I am trying to resolve.
>
>
> Temperature1 is the only Outdoor sensor I have running and I would like
> the data to display this.
>
> From what I have been able to piece together:
>
> raw data - temp 1f
>
> raw packet - temperature_1
>
> mapped packet - extraTemp1
>
>
> If anyone can advise or show me where or what I need to amend or resolve
> this, I would be most appreciative.
>
> Rob
>
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/weewx-user/a51f7eab-c177-4a4d-992b-72931ce86fb5%40googlegroups.com.
