Thank you, Gary. I will give those a try, I’ll report back of any success.
Scott Sent from my iPhone > On Mar 10, 2020, at 9:21 PM, gjr80 <[email protected]> wrote: > > > Hi, > > I have no experience with the ultimeter so can offer no help with the > hardware. You mention an error in the log, do you mean this: > > Feb 27 07:05:17 raspberrypi weewx[11354]: ultimeter: Failed attempt 1 of 5 to > get readings: Unexpected buffer length 59 > > If so I don't believe it will be the cause, I only saw the failure on attempt > 1 of 5 to get the readings, on the face of it it woudl appear that attempt 2 > of 5 worked (or another fail wouls have been logged). > > About all I can suggest is enabling the serial debug option in the ultimeter > driver, that will log the raw data the driver obtains from your station, not > sure what that will show and it may take a bit of decoding. If there is no > rain data there then the driver won't be passing anything on to WeeWX. To > enable serial debug edit wewx.conf, locate the [Ultimeter] stanza and add the > option debug_serial = 1. It shoudl look something like: > > [Ultimeter] > > .... > debug_serial = 1 > .... > > Also make sure you keep debug = 1. Save weewx.conf and restart WeeWX. Have a > look at the log and see what data is being logged from your station? what > shows when its raining? > > You could also try running WeeWX directly when itis raining, that will show > you the loop and archive data that WeeWX is seeing, though if WeeWX is > notreporting any rain there may well be no rain data there. > > Gary > > >> On Wednesday, 11 March 2020 00:45:10 UTC+10, Scott Gray wrote: >> Is anyone able to offer any assistance? >> >>> On Friday, March 6, 2020 at 9:50:10 PM UTC-6, Scott Gray wrote: >>> I am running weewx 3.9.2 on a Raspberry Pi. I have a Peet Bro’s. Ultimeter >>> 2000. It has stopped sending, or weewx has stopped reporting my rain data. >>> It did show a while back, but then stopped reporting to Wunderground. It is >>> also not showing on local index.html page.it shows all other data, temp, >>> wind, barometric pressure, and humidity. >>> >>> The head unit shows rain totals for the day, for instance today .6 inch >>> >>> I have the Ultimeter set to send the data in “data logging” mode. >>> >>> Has anyone encountered this? Any suggestions for solutions or further >>> troubleshooting? >>> >>> I have been running in debug mode. I have attached some logs from a period >>> of time in which we did have rain and rain amount was shown on weather >>> station head unit. >>> >>> I do see an error in the log, unsure how to address or if it is the cause. >>> >>> Any assistance would be appreciated. > > -- > You received this message because you are subscribed to the Google Groups > "weewx-user" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/weewx-user/ac83c99a-8893-468d-aea2-dd90bd529519%40googlegroups.com. -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/BC8219C9-B8D4-4A71-9566-1FD31D827940%40gmail.com.
