Hi Bob, How are you? I would like to ask you if you have any news for me.
Thanks a lot & have a nice day. Pavel Dne pondělí 13. dubna 2020 22:31:05 UTC+2 Bob Atchley napsal(a): > > Hi Pavel, > > I have written a setTime function (not yet tested). I then looked in the > weewx engine to see how this is invoked ... and we have a problem. The > engine calls the getTime function first, so that also needs writing. I > know how to write this but unfortunately the ws6in1 protocol only provides > the time to the minute so will always be between 0 and 59 seconds out from > the correct time. So it seems a bit pointless to write it. Instead I 'm > thinking of automatically setting the time once every 24 hours (i.e. > ignoring the engine). Just not yet quite comfortable with that. So more > thinking time .... > > The setTime also poses 2 problems: > 1) I have no idea how it deals with time zones. This is not a problem for > me I have my rpi2 set at permanent UTC time (no summer time correction) - > but maybe for others (so please let me know if this causes a problem) > 2) The evidence I have shows that when setting the date and time the crc > checksum bytes are sent the wrong way around. It could be because of a > defect in the console, or a defect in the official software and the console > doesn't actually check the crc checksum. Initially I'm sending the bytes > in the correct order - once I test the updated driver I will know the > answer > > So work in progress, but I'm confident I can provide both setting the > console time and the 7 extra sensor data that you are after > > Bob > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/7c4f1903-4e08-40ff-a558-5f90740c68c5%40googlegroups.com.
