Assuming the rainwise bucket has a hobby-board counter, which uses the
DS2423 then the following will be your configuration...
[OWFS]
[[sensor_type]]
rain = rainwise_bucket
[[sensor_map]]
rain = /uncached/1D.30C60D000000
The counter.B is hardcoded in the driver so you don't need to add that part.
Is this the latest weewx, version 4.
Have you looked in syslog to see what is being reported?
The actual values from the sensors can be read directly using the
owfs.py driver script.
Are you using that script, and what is the interface ... usb, i2c-1
localhost ???
If the installation is working then something along the lines of
PYTHONPATH=/home/weewx/bin python /home/weewx/bin/user/owfs.py
--reading=/uncached/1D.81B500000000/Counter.B
should give a result. Pour water in and the counter.B value should increment
Adjust paths to suit. You may need to specify your interface as --iface==XXXX
If that doesn't return a result then more info will be needed, in
particular about your installation.
1. your setup
2. version of weewx
3. which script / driver are you using
4. the syslog output !
On 04/05/2020, michael form <[email protected]> wrote:
> Through much help from this forum, I have gotten WEEWX generally working on
>
> a Raspberry Pi 4. The only thing that does not seem to work is the input
> from my Rainwise Tipping Bucket using a DS2423 1-wire counter. My question
> is how should the device be listed in weewx.conf?
>
> Should the sensor_map listing be: rain = /uncached/1D.30C60D000000,
> or rain = /uncached/1D.30C60D000000/counters.B or something else?
>
> Should the sensor_type be: rain = rainwise_bucket, or rain = delta or
> something else?
>
> Basically, the "Rain (Hourly Total) plot (always at zero), and the RAIN
> TODAY and RAIN RATE on the summary are both zero (using the Seasons skin)
> even though I have poured at least a hurricane's worth of water into the
> bucket. I can hear the tipping mechanism working.
>
> Thanks for any help on how to list the device or suggestions where I should
>
> look.
>
>
> --
> You received this message because you are subscribed to the Google Groups
> "weewx-user" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to [email protected].
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/weewx-user/b3e5aed9-7e7b-4e0c-acf1-bdb6f4dfdeb7%40googlegroups.com.
>
--
Cheers
Glenn
rorpi - read only raspberry pi & various weewx addons
https://github.com/glennmckechnie
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/weewx-user/CAAraAzjhinb_hAQNh9vX6Yb3Tjr6wy_tcGPcn%3D6V4Qo4%3D%2BPqQw%40mail.gmail.com.
