Ville, I have the WeatherCat import working under WeeWX4/python3 (yet to confirm python2) the only outstanding issue I have is units. I do not have access to WeatherCat so I am relying on the User Manual <https://data.trixology.com/downloads/WeatherCatUserManual.pdf> and whatever I can glean from Google. I was hoping you might be able to confirm one assumption and answer another couple of question relating to units:
1. The manual says the unit settings under *Preferences*, *Units/Misc1* are applied throughout WeatherCat, I assume this means the .cat files as well? 2. What units are available under each of temperature (and dewpoint), pressure, windspeed, wind direction and precipitation? 3. I see that wind direction shows the setting 'compass', does that mean degrees or cardinal/intercardinal compass points (eg N, S, NE, NNW etc)? If you cannot help with 2 and 3 that is fine, it won't greatly affect the wee_import code but I would like to include some appropriate guidance on import settings in the example WeatherCat import config file. If you do intend to use the WeatherCat wee_import module there is no need to upgrade to WeeWX 4 if you have not already done so, I will be able to provide you with fairly straightforward instructions to run the 4.0 code side by side with WeeWX 3.x. Gary On Sunday, 10 May 2020 01:14:26 UTC+10, Ville Helander wrote: > > Hi Ryan, > > Sounds great! I tryet importing from csv file some time ago, but newer get > it to work. I guess it was user error.. > Can you share more your configs how you did the import? > > -Ville- > > > > Ryan Stasel <[email protected] <javascript:>> kirjoitti 8.5.2020 kello > 21.48: > > Hi Ville, > > Just a heads up. I literally JUST imported 11 years worth of data out of > WC into Weewx using a csv export from WC (5min intervals) and then using > wee_import to import into weewx. Certainly not as clean as a native import, > but it seems to have worked. Initially tested on my Pi4 and it took about 4 > hours to do the import of 1.2M rows. Did it a second time on a ubuntu VM > and took about 1.5 hours. The import is definitely single threaded (or > close). So I'd run on the fastest single core you have. =) > > On Wednesday, May 6, 2020 at 10:25:32 AM UTC-7, Ville Helander wrote: >> >> Ok, >> >> No problem with waiting, just wanted to hear somethink of WeatherCat >> import state. >> But it sound’s promising! >> >> -Ville- >> >> >> gjr80 <[email protected]> kirjoitti 6.5.2020 kello 15.36: >> >> Hi Ville, >> >> My apologies that WeatherCat support for wee_import did not make it into >> 4.0.0. However, I have started adding back the the WeatherCat code that >> removed back in 2017. I see no reason why it will not appear in the next >> release. I will certainly get you to do some testing, my sample WeatherCat >> data is of somewhat dubious heritage. >> >> Gary >> >> On Wednesday, 6 May 2020 18:06:44 UTC+10, Ville Helander wrote: >>> >>> Hello Gary and all, >>> >>> WeeWX 4 is released, thank you for all the hard work everyone has made!! >>> I see that import from WeatherCat is not included there and would like >>> to know is there happening any progress for making import working? >>> I can test the importing when there is somethink to test. :) >>> >>> Again, thanks for everyone who work with weewx!! >>> >>> -Ville- >>> >>> >>> gjr80 <[email protected]> kirjoitti 18.11.2019 kello 0.20: >>> >>> Hi, >>> >>> No unfortunately it has not been included in b1. I will get to it, >>> unfortunately other things have taken priority. >>> >>> Gary >>> >>> On Saturday, 16 November 2019 21:10:32 UTC+10, Ville Helander wrote: >>>> >>>> Hello Gary, >>>> >>>> WeeWX beta1 is just released, is this WeatherCat import available with >>>> that beta1 release? >>>> >>>> -Ville- >>>> >>>> >>>> > On 13. Oct 2019, at 0.06, gjr80 <[email protected]> wrote: >>>> > >>>> > Thank you, seems I did commit WeatherCat support back in April 2017 >>>> but it appears (for reasons unknown) to have been largely removed. I will >>>> have a look at resurrecting it (it shouldn’t be too hard) though it was a >>>> first cut so may still have some rough edges plus documentation is still >>>> to >>>> be updated. I will try to include it in the 4.0 release though I have a >>>> few >>>> other things to finish first plus free time is somewhat scarce at the >>>> moment. Fortunately your WeatherCat data is not going anywhere :) >>>> > >>>> > Gary >>>> > >>>> > -- >>>> > You received this message because you are subscribed to a topic in >>>> the Google Groups "weewx-user" group. >>>> > To unsubscribe from this topic, visit >>>> https://groups.google.com/d/topic/weewx-user/zc4atfmQIco/unsubscribe. >>>> > To unsubscribe from this group and all its topics, send an email to >>>> [email protected]. >>>> > To view this discussion on the web visit >>>> https://groups.google.com/d/msgid/weewx-user/a9342c34-fcb5-4b6d-9aa1-faa43253f160%40googlegroups.com. >>>> >>>> >>>> >>>> >>> -- >>> You received this message because you are subscribed to a topic in the >>> Google Groups "weewx-user" group. >>> To unsubscribe from this topic, visit >>> https://groups.google.com/d/topic/weewx-user/zc4atfmQIco/unsubscribe. >>> To unsubscribe from this group and all its topics, send an email to >>> [email protected]. >>> To view this discussion on the web visit >>> https://groups.google.com/d/msgid/weewx-user/f6f9db7a-d353-4343-a3c3-cbf5b8752f33%40googlegroups.com >>> >>> <https://groups.google.com/d/msgid/weewx-user/f6f9db7a-d353-4343-a3c3-cbf5b8752f33%40googlegroups.com?utm_medium=email&utm_source=footer> >>> . >>> >>> >>> >> -- >> You received this message because you are subscribed to a topic in the >> Google Groups "weewx-user" group. >> To unsubscribe from this topic, visit >> https://groups.google.com/d/topic/weewx-user/zc4atfmQIco/unsubscribe. >> To unsubscribe from this group and all its topics, send an email to >> [email protected]. >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/weewx-user/ed4ade9e-e49e-4825-87df-98f61684917f%40googlegroups.com >> >> <https://groups.google.com/d/msgid/weewx-user/ed4ade9e-e49e-4825-87df-98f61684917f%40googlegroups.com?utm_medium=email&utm_source=footer> >> . >> >> >> > -- > You received this message because you are subscribed to a topic in the > Google Groups "weewx-user" group. > To unsubscribe from this topic, visit > https://groups.google.com/d/topic/weewx-user/zc4atfmQIco/unsubscribe. > To unsubscribe from this group and all its topics, send an email to > [email protected] <javascript:>. > To view this discussion on the web visit > https://groups.google.com/d/msgid/weewx-user/91a8a6bb-f324-43c4-a297-eb61e3085e84%40googlegroups.com > > <https://groups.google.com/d/msgid/weewx-user/91a8a6bb-f324-43c4-a297-eb61e3085e84%40googlegroups.com?utm_medium=email&utm_source=footer> > . > > > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/a064aff0-07ea-4002-b0dd-b6a18bc6b3c1%40googlegroups.com.
