Hi Remy, I am intending to write a utility to pull the data off the console into csv format. In fact I had a test utility that did just this while working out the usb protocol, so it should not be difficult.
I don't have any extra sensors so its difficult for me to answer your other 2 questions. I'm new to weewx as well, I know the the drivers and part of the engine quite well, but the skins and graphing remain a mystery at the moment. Others have tested the ws6in1 driver with extra sensors, so I know the driver is doing the right thing and the temperature and humidity values from the extra sensors are being properly added to the database. Hopefully someone else can help you with this. Really pleased that the ws6in1 driver is working for you cheers Bob On Saturday, 16 May 2020 13:54:10 UTC+1, Remy Lavabre wrote: > > Hello Bob, > > Indeed you have done a very good job !!! > I have a Bresser 6-1 station and everything works perfectly with my > Raspberry Pi Zero W !!! > That's great ! I can only thank you! > > Without wanting to abuse, I would however have three small things to ask > you: > > A/ My weather station is equipped with 3 additional sensors (thermometers > and hygrometers). > The three temperature information (with history) appears on the html page > xxx.xxx.xxx.xxx/weewx/ > in the form of three curves in a single table > (Temperature1Temperature2Tempreature3) > The humidity 1,2 and 3 of the three additional probes does not appear > anywhere, however... > Is this information retrieved by your pilot and if so, how to display it > as for the temperature? > > B/ I use the SteelSeries-Weather-Gauges which correspond exactly to what I > want (https://github.com/mcrossley/SteelSeries-Weather-Gauges). > Everything is displayed correctly and perfectly except ... the > temperatures 1,2,3 and the humidity 1,2 and 3 of my three additional probes! > Could you tell me what to add (and where) to bring up an additional > temperature gauge (with 3 pushbuttons 1,2 and 3) as well as an additional > humidity gauge (with if possible again 3 push buttons) to display this > additional data on the html page? > > C/ My Bresser weather station records the data every 30 minutes. Is it > possible with Weewx and > your driver to recover this data in a file in "CSV" format as does Windows > software which > connects via the USB port? And if yes, how ? > > Here bob, know that you have done a lot for me with your pilot and that > the solution to the > three questions that remain would fulfill all my hopes !!!!! > > And thank you again for this great pilot !!!! > Signed a great admirer of your work! ;-))))) > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/4a7fd425-0708-4004-9567-2008e1a88657%40googlegroups.com.
