If you can plug in your console, will get the pressure. If not, you can get a BME280 sensor for your pressure, inside temp and humidity.
On Thursday, May 21, 2020 at 7:49:14 PM UTC-4, Bryan Parke wrote: > > Hi all. Weewx is great! I'm very impressed with all that it can do. Here > is a bit about my setup. > > 1) AcuRite 5-in-1 pro broadcasting on 433mhz > 2) Raspberry Pi with rtl-sdr capturing data using rtl_433 > 3) Using the sdr driver > 4) Using mosquitto to publish real-time weather data and viewing that in > belchertown realtime > 5) Pushing every 10 minutes to the CWOP for APRS ( > https://aprs.fi/info/a/KM6YFK-13) > > All is working as expected, no issues at all. > > My question is this: I'd like to get barometric pressure also, but the > 5-in-1 doesn't have that. My understanding is that in order to get > barometric pressure, I would need to purchase the AcuRite receiver/screen > and plug it in via USB to my raspberry pi; in that the barometric pressure > sensor is actually in the screen/display unit. > > 1) is that true? Or is there actually another way to get the pressure > using the 5-in-1? > 2) Is there another device that you all like that would accomplish the > same thing? > > Hopefully I'm asking the right question in the right way. Ultimately I > just want to also include the air pressure in my weather reports (see > attachment, sad bottom right corner with no barometer info). > > Thanks! > Bryan > > > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/4df9f447-fcb3-409b-8d27-3e6c1f6ba7da%40googlegroups.com.
