Ok it will be worth your while posting a request as I suggested so some of the real WeeWX experts can have a look. Its probable a simple fix but I don't know what it is.
Ian On Sat, 30 May 2020 at 16:15, 'Simon Davies' via weewx-user < weewx-user@googlegroups.com> wrote: > my station is about 3 years old, looking back over some old data I have > had this problem (or something similar) for over 12 months, I only noticed > it when upgrading to v4 for weewx & weather34, which I did at the same > time. > > > On Saturday, May 30, 2020 at 3:14:26 PM UTC+1, steeple ian wrote: >> >> Thanks Simon, >> that is what I meant. >> Out of interest how old is your weather station? I just wonder whether >> there has been a change in firmware. I suspect you will get the same >> results with the driver I suggested. Also I suspect that driver has not yet >> been ported to WeeWX 4. When did you update to WeeWX 4. Was it the same >> time you updated Weather34? >> >> If the issue started when you upgraded WeeWX it will worth your while >> posting this as as a separate issue - something like ‘when I upgraded to >> WeeWX I noticed that my UVI figure went crazy’ or words to that effect. >> Ian >> >> On Sat, 30 May 2020 at 14:22, 'Simon Davies' via weewx-user < >> weewx...@googlegroups.com> wrote: >> >>> >>> >>> by weewx-page I assume this is what you mean (see screenshot) >>> >>> The UV Index is the same as the weather34 display >>> >>> >>> >>> >>> >>> On Saturday, May 30, 2020 at 1:34:03 PM UTC+1, steeple ian wrote: >>>> >>>> to remove weewx-crt (you will still need the weather34 service so dont >>>> delete that) >>>> >>>> sudo ,/wee_extension --uninstall crt >>>> >>>> (you may have to insert the correct paths depending on your setup) >>>> >>>> >>>> On Sat, 30 May 2020 at 13:29, steeple ian <steep...@gmail.com> wrote: >>>> >>>>> Hi Simon, >>>>> >>>>> Can you check one more thing please as your WeeWX page is not visible >>>>> to me. What does the UV reading show there. If it is a correct UV Index, I >>>>> can provide a simple fix. >>>>> >>>>> Ian >>>>> >>>>> On Sat, 30 May 2020 at 12:22, 'Simon Davies' via weewx-user < >>>>> weewx...@googlegroups.com> wrote: >>>>> >>>> here are the reading from realtime.txt >>>>>> >>>>>> 30/05/20 12:13:14 22.5 45 10.0 0.7 0.8 148 0.0 0.0 1010.7 SSE 1 m/s C >>>>>> mb mm 8.7 -0.8 0.0 109.2 0.0 24.7 35 22.5 5.1 22.5 12:12 9.7 05:06 2.5 >>>>>> 11:15 3.3 02:21 1012.4 00:02 1010.7 12:12 4.0.0 0 3.3 22.5 NULL 2966 NULL >>>>>> 627 110 0.0 0 1 0 ESE NULL m NULL 7.4 NULL 0 >>>>>> >>>>>> they are much the same as my w34realtime.txt. so maybe it is the >>>>>> driver. >>>>>> >>>>>> could you send the link to the driver you are using (*HP1000 driver >>>>>> from Aussie Susan)*? >>>>>> >>>>>> Also do you know if there is a simple enable/disable for crt & >>>>>> weather34? otherwise how should I uninstall them properly? >>>>>> >>>>>> e.g. >>>>>> [CumulusRealTime] >>>>>> enable = false >>>>>> >>>>>> [Weather34RealTime] >>>>>> enable = true >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> On Saturday, May 30, 2020 at 9:36:43 AM UTC+1, steeple ian wrote: >>>>>>> >>>>>>> Simon >>>>>>> If you set debug = 1 in weewx.conf >>>>>>> restart and then run sudo tail -f /var/log/syslog from the command >>>>>>> line you should be able to see the loop data coming from your weather >>>>>>> station in real time. >>>>>>> >>>>>>> On Sat, 30 May 2020 at 08:57, steeple ian <steep...@gmail.com> >>>>>>> wrote: >>>>>>> >>>>>>>> Simon, >>>>>>>> You are correct in your original assumption that w34realtime.txt is >>>>>>>> based on the Cumulus realtime.txt specification. It has had few >>>>>>>> additional >>>>>>>> values added but nothing to do with UV measurements. >>>>>>>> >>>>>>>> According to the Cumulus specification position 44 should be UVI >>>>>>>> but the value you have there is clearly not. I used to have a similar >>>>>>>> device to you which is a clone of Fine Offset, from memory it did not >>>>>>>> actually measure UV directly but was a derived value. I always used to >>>>>>>> use >>>>>>>> the HP1000 driver from Aussie Susan and cannot recall having any issues >>>>>>>> with that. >>>>>>>> >>>>>>>> One quick check you could make which would eliminate any issue >>>>>>>> caused by weather34.py is to disable weather34.py and install the >>>>>>>> crt.py >>>>>>>> and check the realtime.txt out put from that. If you still have the >>>>>>>> same >>>>>>>> issue, I would look at the driver you are using. >>>>>>>> >>>>>>>> Ian >>>>>>>> >>>>>>>> On Fri, 29 May 2020 at 13:04, 'Simon Davies' via weewx-user < >>>>>>>> weewx...@googlegroups.com> wrote: >>>>>>>> >>>>>>>>> Weather34 is displaying the Solar radiation reading instead of the >>>>>>>>> UV index. Any idea how to correct this? >>>>>>>>> >>>>>>>>> I've installed this version a few weeks ago and its been a problem >>>>>>>>> since then. WX-HC20-IHVN-1.0.0 WeeWX-(4.0.0) Ambient Weather WS-1000 >>>>>>>>> http://cawston.weather-station.co.uk/ >>>>>>>>> >>>>>>>>> w34realtime.txt : 29/05/20 12:12:34 22.0 33 5.0 0.5 0.2 77 0.0 0.0 >>>>>>>>> 1015.5 ENE 0 m/s C mb mm 9.3 -0.7 0.0 109.2 0.0 25.3 23 22.0 3.8 22.0 >>>>>>>>> 12:11 >>>>>>>>> 11.0 05:35 2.0 11:21 4.4 09:49 1017.9 00:10 1015.2 11:36 4.0.0 0 3.3 >>>>>>>>> 22.0 >>>>>>>>> NULL 3054.0 NULL 630 188 0.0 0 1 0 S NULL m NULL 7.4 NULL 0 >>>>>>>>> >>>>>>>>> 44th value is 3054.0 and is displayed as the UVI. >>>>>>>>> >>>>>>>>> I don't have a definition for the w34realtime.txt, >>>>>>>>> https://cumuluswiki.org/a/Realtime.txt has the definition for >>>>>>>>> "realtime.txt", i'm unsure is this is the same. >>>>>>>>> >>>>>>>>> If the definition is correct then it looks like my solar radiation >>>>>>>>> is in the wrong place. Any idea how to fix. >>>>>>>>> >>>>>>>>> weewx config: >>>>>>>>> >>>>>>>>> [Weather34RealTime] >>>>>>>>> binding = loop >>>>>>>>> exclude_fields = rain >>>>>>>>> filename = /var/www/html/weewx/weather34/w34realtime.txt >>>>>>>>> unit_system = METRICWX >>>>>>>>> "# cache_enable" = False >>>>>>>>> cache_stale_time = 900 >>>>>>>>> cache_directory = /tmp >>>>>>>>> >>>>>>>>> >>>>>>>>> -- >>>>>>>>> You received this message because you are subscribed to the Google >>>>>>>>> Groups "weewx-user" group. >>>>>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>>>>> send an email to weewx...@googlegroups.com. >>>>>>>>> To view this discussion on the web visit >>>>>>>>> https://groups.google.com/d/msgid/weewx-user/da42a7a6-caeb-4d5f-a452-025ee9222afc%40googlegroups.com >>>>>>>>> <https://groups.google.com/d/msgid/weewx-user/da42a7a6-caeb-4d5f-a452-025ee9222afc%40googlegroups.com?utm_medium=email&utm_source=footer> >>>>>>>>> . >>>>>>>>> >>>>>>>> -- >>>>>> You received this message because you are subscribed to the Google >>>>>> Groups "weewx-user" group. >>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>> send an email to weewx...@googlegroups.com. >>>>>> >>>>> To view this discussion on the web visit >>>>>> https://groups.google.com/d/msgid/weewx-user/eb4a187a-e897-405f-9eb0-2a81ccf48536%40googlegroups.com >>>>>> <https://groups.google.com/d/msgid/weewx-user/eb4a187a-e897-405f-9eb0-2a81ccf48536%40googlegroups.com?utm_medium=email&utm_source=footer> >>>>>> . >>>>>> >>>>> -- >>> You received this message because you are subscribed to the Google >>> Groups "weewx-user" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to weewx...@googlegroups.com. >>> To view this discussion on the web visit >>> https://groups.google.com/d/msgid/weewx-user/2fbfe2c3-35e5-4882-a47c-bb6c7c5bbc7e%40googlegroups.com >>> <https://groups.google.com/d/msgid/weewx-user/2fbfe2c3-35e5-4882-a47c-bb6c7c5bbc7e%40googlegroups.com?utm_medium=email&utm_source=footer> >>> . >>> >> -- > You received this message because you are subscribed to the Google Groups > "weewx-user" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to weewx-user+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/weewx-user/999e509e-f0f5-4b9f-bf75-741da909f6b7%40googlegroups.com > <https://groups.google.com/d/msgid/weewx-user/999e509e-f0f5-4b9f-bf75-741da909f6b7%40googlegroups.com?utm_medium=email&utm_source=footer> > . > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/CADASSaRZZ%2BQ-%2BXQ5DLEuxrY1Zd9R5-EAoht20wmoONBW5Cgj4Q%40mail.gmail.com.