debug attached
On Tuesday, June 2, 2020 at 10:52:20 PM UTC-4, Jamie Stephens wrote: > > i guess i'm done, at a lost as to what to change >> > > when i browse the internal webpage there is no data which makes me think > it is not intercepting WU..... > > # WEEWX CONFIGURATION FILE > > # > > # Copyright (c) 2009-2019 Tom Keffer <[email protected]> > > # See the file LICENSE.txt for your rights. > > >> >> ############################################################################## > > >> # This section is for general configuration information. > > >> # Set to 1 for extra debug info, otherwise comment it out or set to zero > > debug = 1 > > >> # Root directory of the weewx data file hierarchy for this station > > WEEWX_ROOT = / > > >> # Whether to log successful operations > > log_success = True > > >> # Whether to log unsuccessful operations > > log_failure = True > > >> # How long to wait before timing out a socket (FTP, HTTP) connection > > socket_timeout = 20 > > >> # Do not modify this. It is used when installing and updating weewx. > > version = 4.1.1 > > >> >> ############################################################################## > > >> # This section is for information about the station. > > >> [Station] > > >> # Description of the station location > > location = "South Point Landing Belmont, NC" > > >> # Latitude in decimal degrees. Negative for southern hemisphere > > latitude = 35.17491 > > # Longitude in decimal degrees. Negative for western hemisphere. > > longitude = -81.02416 > > >> # Altitude of the station, with unit it is in. This is downloaded from > > # from the station if the hardware supports it. > > altitude = 663, foot > > >> # Set to type of station hardware. There must be a corresponding >> stanza > > # in this file with a 'driver' parameter indicating the driver to be >> used. > > station_type = Interceptor > > >> # If you have a website, you may specify an URL > > station_url = XXX obfuscated by wee_debug XXX > > >> # The start of the rain year (1=January; 10=October, etc.). This is > > # downloaded from the station if the hardware supports it. > > rain_year_start = 1 > > >> # Start of week (0=Monday, 6=Sunday) > > week_start = 6 > > >> >> ############################################################################## > > >> [Interceptor] > > # This section is for the network traffic interceptor driver. > > >> # The driver to use: > > driver = user.interceptor > > >> # Specify the hardware device to capture. Options include: > > # acurite-bridge - acurite internet bridge, smarthub, or access > > # observer - fine offset WH2600/HP1000/HP1003, ambient WS2902 > > # lw30x - oregon scientific LW301/LW302 > > # lacrosse-bridge - lacrosse GW1000U/C84612 internet bridge > > # ecowitt-client - any hardware that uses the ecowitt protocol > > # wu-client - any hardware that uses the weather underground protocol > > device_type = wu-client > > mode = listen > > port = 80 > > >> >> ############################################################################## > > >> [Simulator] > > # This section is for the weewx weather station simulator > > >> # The time (in seconds) between LOOP packets. > > loop_interval = 2.5 > > >> # The simulator mode can be either 'simulator' or 'generator'. > > # Real-time simulator. Sleep between each LOOP packet. > > mode = simulator > > # Generator. Emit LOOP packets as fast as possible (useful for >> testing). > > #mode = generator > > >> # The start time. Format is YYYY-mm-ddTHH:MM. If not specified, the >> default > > # is to use the present time. > > #start = 2011-01-01T00:00 > > >> # The driver to use: > > driver = weewx.drivers.simulator > > >> >> ############################################################################## > > >> # This section is for uploading data to Internet sites > > >> [StdRESTful] > > >> [[StationRegistry]] > > # To register this weather station with weewx, set this to true > > register_this_station = True > > >> [[AWEKAS]] > > # This section is for configuring posts to AWEKAS. > > >> # If you wish to do this, set the option 'enable' to true, > > # and specify a username and password. > > # To guard against parsing errors, put the password in quotes. > > enable = false > > username = XXX obfuscated by wee_debug XXX > > password = XXX obfuscated by wee_debug XXX > > >> [[CWOP]] > > # This section is for configuring posts to CWOP. > > >> # If you wish to do this, set the option 'enable' to true, > > # and specify the station ID (e.g., CW1234). > > enable = true > > station = XXX obfuscated by wee_debug XXX > > >> # If this is an APRS (radio amateur) station, uncomment > > # the following and replace with a passcode (e.g., 12345). > > #passcode = replace_me (APRS stations only) > > >> [[PWSweather]] > > # This section is for configuring posts to PWSweather.com. > > >> # If you wish to do this, set the option 'enable' to true, > > # and specify a station and password. > > # To guard against parsing errors, put the password in quotes. > > enable = false > > station = XXX obfuscated by wee_debug XXX > > password = XXX obfuscated by wee_debug XXX > > >> [[WOW]] > > GNU nano 4.8 >> weewx.debug >> Modified > > # This section is for configuring posts to WOW. > > >> # If you wish to do this, set the option 'enable' to true, > > # and specify a station and password. > > # To guard against parsing errors, put the password in quotes. > > enable = false > > station = XXX obfuscated by wee_debug XXX > > password = XXX obfuscated by wee_debug XXX > > >> [[Wunderground]] > > # This section is for configuring posts to the Weather Underground. > > >> # If you wish to do this, set the option 'enable' to true, > > # and specify a station (e.g., 'KORHOODR3') and password. > > # To guard against parsing errors, put the password in quotes. > > enable = true > > station = XXX obfuscated by wee_debug XXX > > password = XXX obfuscated by wee_debug XXX > > >> # If you plan on using wunderfixer, set the following > > # to your API key: > > api_key = XXX obfuscated by wee_debug XXX > > >> # Set the following to True to have weewx use the WU "Rapidfire" > > # protocol. Not all hardware can support it. See the User's Guide. > > rapidfire = True > > log_success = True > > > > # This section specifies what reports, using which skins, to generate. > > >> [StdReport] > > >> # Where the skins reside, relative to WEEWX_ROOT > > SKIN_ROOT = /etc/weewx/skins > > >> # Where the generated reports should go, relative to WEEWX_ROOT > > HTML_ROOT = /var/www/html/weewx > > >> # The database binding indicates which data should be used in reports. > > data_binding = wx_binding > > >> # Whether to log a successful operation > > log_success = True > > >> # Whether to log an unsuccessful operation > > log_failure = False > > >> # Each of the following subsections defines a report that will be run. > > # See the customizing guide to change the units, plot types and line > > # colors, modify the fonts, display additional sensor data, and other > > # customizations. Many of those changes can be made here by overriding > > # parameters, or by modifying templates within the skin itself. > > >> [[SeasonsReport]] > > # The SeasonsReport uses the 'Seasons' skin, which contains the > > # images, templates and plots for the report. > > skin = Seasons > > enable = true > > >> [[SmartphoneReport]] > > # The SmartphoneReport uses the 'Smartphone' skin, and the images >> and > > # files are placed in a dedicated subdirectory. > > skin = Smartphone > > enable = false > > HTML_ROOT = /var/www/html/weewx/smartphone > > >> [[MobileReport]] > > # The MobileReport uses the 'Mobile' skin, and the images and files > > # are placed in a dedicated subdirectory. > > skin = Mobile > > enable = false > > HTML_ROOT = /var/www/html/weewx/mobile > > >> [[StandardReport]] > > # This is the old "Standard" skin. By default, it is not enabled. > > skin = Standard > > enable = fa > > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/32700039-391b-4db0-8c18-e348dddf9f12%40googlegroups.com.
# WEEWX CONFIGURATION FILE # # Copyright (c) 2009-2019 Tom Keffer <[email protected]> # See the file LICENSE.txt for your rights. ############################################################################## # This section is for general configuration information. # Set to 1 for extra debug info, otherwise comment it out or set to zero debug = 1 # Root directory of the weewx data file hierarchy for this station WEEWX_ROOT = / # Whether to log successful operations log_success = True # Whether to log unsuccessful operations log_failure = True # How long to wait before timing out a socket (FTP, HTTP) connection socket_timeout = 20 # Do not modify this. It is used when installing and updating weewx. version = 4.1.1 ############################################################################## # This section is for information about the station. [Station] # Description of the station location location = "South Point Landing Belmont, NC" # Latitude in decimal degrees. Negative for southern hemisphere latitude = 35.17491 # Longitude in decimal degrees. Negative for western hemisphere. longitude = -81.02416 # Altitude of the station, with unit it is in. This is downloaded from # from the station if the hardware supports it. altitude = 663, foot # Set to type of station hardware. There must be a corresponding stanza # in this file with a 'driver' parameter indicating the driver to be used. station_type = Interceptor # If you have a website, you may specify an URL station_url = XXX obfuscated by wee_debug XXX # The start of the rain year (1=January; 10=October, etc.). This is # downloaded from the station if the hardware supports it. rain_year_start = 1 # Start of week (0=Monday, 6=Sunday) week_start = 6 ############################################################################## [Interceptor] # This section is for the network traffic interceptor driver. # The driver to use: driver = user.interceptor # Specify the hardware device to capture. Options include: # acurite-bridge - acurite internet bridge, smarthub, or access # observer - fine offset WH2600/HP1000/HP1003, ambient WS2902 # lw30x - oregon scientific LW301/LW302 # lacrosse-bridge - lacrosse GW1000U/C84612 internet bridge # ecowitt-client - any hardware that uses the ecowitt protocol # wu-client - any hardware that uses the weather underground protocol device_type = wu-client mode = listen port = 80 ############################################################################## [Simulator] # This section is for the weewx weather station simulator # The time (in seconds) between LOOP packets. loop_interval = 2.5 # The simulator mode can be either 'simulator' or 'generator'. # Real-time simulator. Sleep between each LOOP packet. mode = simulator # Generator. Emit LOOP packets as fast as possible (useful for testing). #mode = generator # The start time. Format is YYYY-mm-ddTHH:MM. If not specified, the default # is to use the present time. #start = 2011-01-01T00:00 # The driver to use: driver = weewx.drivers.simulator ############################################################################## # This section is for uploading data to Internet sites [StdRESTful] [[StationRegistry]] # To register this weather station with weewx, set this to true register_this_station = True [[AWEKAS]] # This section is for configuring posts to AWEKAS. # If you wish to do this, set the option 'enable' to true, # and specify a username and password. # To guard against parsing errors, put the password in quotes. enable = false username = XXX obfuscated by wee_debug XXX password = XXX obfuscated by wee_debug XXX [[CWOP]] # This section is for configuring posts to CWOP. # If you wish to do this, set the option 'enable' to true, # and specify the station ID (e.g., CW1234). enable = true station = XXX obfuscated by wee_debug XXX # If this is an APRS (radio amateur) station, uncomment # the following and replace with a passcode (e.g., 12345). #passcode = replace_me (APRS stations only) [[PWSweather]] # This section is for configuring posts to PWSweather.com. # If you wish to do this, set the option 'enable' to true, # and specify a station and password. # To guard against parsing errors, put the password in quotes. enable = false station = XXX obfuscated by wee_debug XXX password = XXX obfuscated by wee_debug XXX [[WOW]] GNU nano 4.8 weewx.debug Modified # This section is for configuring posts to WOW. # If you wish to do this, set the option 'enable' to true, # and specify a station and password. # To guard against parsing errors, put the password in quotes. enable = false station = XXX obfuscated by wee_debug XXX password = XXX obfuscated by wee_debug XXX [[Wunderground]] # This section is for configuring posts to the Weather Underground. # If you wish to do this, set the option 'enable' to true, # and specify a station (e.g., 'KORHOODR3') and password. # To guard against parsing errors, put the password in quotes. enable = true station = XXX obfuscated by wee_debug XXX password = XXX obfuscated by wee_debug XXX # If you plan on using wunderfixer, set the following # to your API key: api_key = XXX obfuscated by wee_debug XXX # Set the following to True to have weewx use the WU "Rapidfire" # protocol. Not all hardware can support it. See the User's Guide. rapidfire = True log_success = True # This section specifies what reports, using which skins, to generate. [StdReport] # Where the skins reside, relative to WEEWX_ROOT SKIN_ROOT = /etc/weewx/skins # Where the generated reports should go, relative to WEEWX_ROOT HTML_ROOT = /var/www/html/weewx # The database binding indicates which data should be used in reports. data_binding = wx_binding # Whether to log a successful operation log_success = True # Whether to log an unsuccessful operation log_failure = False # Each of the following subsections defines a report that will be run. # See the customizing guide to change the units, plot types and line # colors, modify the fonts, display additional sensor data, and other # customizations. Many of those changes can be made here by overriding # parameters, or by modifying templates within the skin itself. [[SeasonsReport]] # The SeasonsReport uses the 'Seasons' skin, which contains the # images, templates and plots for the report. skin = Seasons enable = true [[SmartphoneReport]] # The SmartphoneReport uses the 'Smartphone' skin, and the images and # files are placed in a dedicated subdirectory. skin = Smartphone enable = false HTML_ROOT = /var/www/html/weewx/smartphone [[MobileReport]] # The MobileReport uses the 'Mobile' skin, and the images and files # are placed in a dedicated subdirectory. skin = Mobile enable = false HTML_ROOT = /var/www/html/weewx/mobile [[StandardReport]] # This is the old "Standard" skin. By default, it is not enabled. skin = Standard enable = false [[FTP]] # FTP'ing the results to a webserver is treated as just another report, # albeit one with an unusual report generator! skin = Ftp # If you wish to use FTP, set "enable" to "true", then # fill out the next four lines. # Use quotes around passwords to guard against parsing errors. enable = false user = XXX obfuscated by wee_debug XXX password = XXX obfuscated by wee_debug XXX server = replace_me # The ftp server name, e.g, www.myserver.org path = replace_me # The destination directory, e.g., /weather # Set to True for an FTP over TLS (FTPS) connection. Not all servers # support this. secure_ftp = False # To upload files from something other than what HTML_ROOT is set # to above, specify a different HTML_ROOT here. #HTML_ROOT = /var/www/html/weewx # Most FTP servers use port 21 port = 21 # Set to 1 to use passive mode, zero for active mode passive = 1 [[RSYNC]] # rsync'ing to a webserver is treated as just another report skin = Rsync # If you wish to use rsync, you must configure passwordless ssh using # public/private key authentication from the user account that weewx # runs to the user account on the remote machine where the files # will be copied. # # If you wish to use rsync, set "enable" to "true", then # fill out server, user, and path. # The server should appear in your .ssh/config file. # The user is the username used in the identity file. # The path is the destination directory, such as /var/www/html/weather. # Be sure that the user has write permissions on the destination! enable = false server = replace_me user = XXX obfuscated by wee_debug XXX path = replace_me # To upload files from something other than what HTML_ROOT is set # to above, specify a different HTML_ROOT here. #HTML_ROOT = /var/www/html/weewx # Rsync can be configured to remove files from the remote server if # they don't exist under HTML_ROOT locally. USE WITH CAUTION: if you # make a mistake in the remote path, you could could unintentionally # cause unrelated files to be deleted. Set to 1 to enable remote file # deletion, zero to allow files to accumulate remotely. delete = 0 #### # Various options for customizing your reports. [[Defaults]] [[[Units]]] # The following section sets what unit to use for each unit group. # NB: The unit is always in the singular. I.e., 'mile_per_hour', # NOT 'miles_per_hour' [[[[Groups]]]] group_altitude = foot # Options are 'foot' or 'meter' group_degree_day = degree_F_day # Options are 'degree_F_day' or 'degree_C_day' group_distance = mile # Options are 'mile' or 'km' group_pressure = inHg # Options are 'inHg', 'mmHg', 'mbar', or 'hPa' group_rain = inch # Options are 'inch', 'cm', or 'mm' group_rainrate = inch_per_hour # Options are 'inch_per_hour', 'cm_per_hour', or 'mm_per_hour' group_speed = mile_per_hour # Options are 'mile_per_hour', 'km_per_hour', 'knot', or 'meter_per_second' group_speed2 = mile_per_hour2 # Options are 'mile_per_hour2', 'km_per_hour2', 'knot2', or 'meter_per_second2' group_temperature = degree_F # Options are 'degree_F' or 'degree_C' # The following section sets the formatting for each type of unit. [[[[StringFormats]]]] centibar = %.0f cm = %.2f cm_per_hour = %.2f degree_C = %.1f degree_F = %.1f degree_compass = %.0f foot = %.0f hPa = %.1f hour = %.1f inHg = %.3f inch = %.2f inch_per_hour = %.2f km = %.1f km_per_hour = %.0f km_per_hour2 = %.1f knot = %.0f knot2 = %.1f mbar = %.1f meter = %.0f meter_per_second = %.1f meter_per_second2 = %.1f mile = %.1f mile_per_hour = %.0f mile_per_hour2 = %.1f mm = %.1f mmHg = %.1f mm_per_hour = %.1f percent = %.0f second = %.0f uv_index = %.1f volt = %.1f watt_per_meter_squared = %.0f NONE = " N/A" # The following section overrides the label used for each type of unit [[[[Labels]]]] meter = " meter", " meters" # You may prefer "metre". day = " day", " days" hour = " hour", " hours" minute = " minute", " minutes" second = " second", " seconds" NONE = "" # The following section sets the format for each time scale. # The values below will work in every locale, but they may not look # particularly attractive. [[[[TimeFormats]]]] hour = %H:%M day = %X week = %X (%A) month = %x %X year = %x %X rainyear = %x %X current = %x %X ephem_day = %X ephem_year = %x %X [[[[Ordinates]]]] # Ordinal directions. The last one is for no wind direction directions = N, NNE, NE, ENE, E, ESE, SE, SSE, S, SSW, SW, WSW, W, WNW, NW, NNW, N/A # The following section sets the base temperatures used for the # calculation of heating, cooling, and growing degree-days. [[[[DegreeDays]]]] # Base temperature for heating days, with unit: heating_base = 65, degree_F # Base temperature for cooling days, with unit: cooling_base = 65, degree_F # Base temperature for growing days, with unit: growing_base = 50, degree_F # A trend takes a difference across a time period. The following # section sets the time period, and how big an error is allowed to # still be counted as the start or end of a period. [[[[Trend]]]] time_delta = 10800 # 3 hours time_grace = 300 # 5 minutes # The labels to be used for each observation type [[[Labels]]] # Set to hemisphere abbreviations suitable for your location: hemispheres = N, S, E, W # Formats to be used for latitude whole degrees, longitude whole # degrees, and minutes: latlon_formats = %02d, %03d, %05.2f # Generic labels, keyed by an observation type. [[[[Generic]]]] barometer = Barometer dewpoint = Dew Point ET = ET heatindex = Heat Index inHumidity = Inside Humidity inTemp = Inside Temperature outHumidity = Humidity outTemp = Outside Temperature radiation = Radiation rain = Rain rainRate = Rain Rate UV = UV Index windDir = Wind Direction windGust = Gust Speed windGustDir = Gust Direction windSpeed = Wind Speed windchill = Wind Chill windgustvec = Gust Vector windvec = Wind Vector extraTemp1 = Temperature1 extraTemp2 = Temperature2 extraTemp3 = Temperature3 # Sensor status indicators rxCheckPercent = Signal Quality txBatteryStatus = Transmitter Battery windBatteryStatus = Wind Battery rainBatteryStatus = Rain Battery outTempBatteryStatus = Outside Temperature Battery inTempBatteryStatus = Inside Temperature Battery consBatteryVoltage = Console Battery heatingVoltage = Heating Battery supplyVoltage = Supply Voltage referenceVoltage = Reference Voltage [[[Almanac]]] # The labels to be used for the phases of the moon: moon_phases = New, Waxing crescent, First quarter, Waxing gibbous, Full, Waning gibbous, Last quarter, Waning crescent ############################################################################## # This service acts as a filter, converting the unit system coming from # the hardware to a unit system in the database. [StdConvert] # The target_unit affects only the unit system in the database. Once # chosen it cannot be changed without converting the entire database. # Modification of target_unit after starting weewx will result in # corrupt data - the database will contain a mix of US and METRIC data. # # The value of target_unit does not affect the unit system for # reporting - reports can display US, Metric, or any combination of units. # # In most cases, target_unit should be left as the default: US # # In particular, those migrating from a standard wview installation # should use US since that is what the wview database contains. # DO NOT MODIFY THIS VALUE UNLESS YOU KNOW WHAT YOU ARE DOING! target_unit = US # Options are 'US', 'METRICWX', or 'METRIC' ############################################################################## # This section can adjust data using calibration expressions. [StdCalibrate] [[Corrections]] # For each type, an arbitrary calibration expression can be given. # It should be in the units defined in the StdConvert section. # Example: foo = foo + 0.2 ############################################################################## # This section is for quality control checks. If units are not specified, # values must be in the units defined in the StdConvert section. [StdQC] [[MinMax]] barometer = 26, 32.5, inHg pressure = 24, 34.5, inHg outTemp = -40, 120, degree_F inTemp = 10, 120, degree_F outHumidity = 0, 100 inHumidity = 0, 100 windSpeed = 0, 120, mile_per_hour rain = 0, 10, inch ############################################################################## # This section controls the origin of derived values. [StdWXCalculate] [[Calculations]] # How to calculate derived quantities. Possible values are: # hardware - use the value provided by hardware # software - use the value calculated by weewx # prefer_hardware - use value provide by hardware if available, # otherwise use value calculated by weewx pressure = prefer_hardware altimeter = prefer_hardware appTemp = prefer_hardware barometer = prefer_hardware beaufort = prefer_hardware cloudbase = prefer_hardware dewpoint = prefer_hardware ET = prefer_hardware heatindex = prefer_hardware humidex = prefer_hardware inDewpoint = prefer_hardware maxSolarRad = prefer_hardware rainRate = prefer_hardware windchill = prefer_hardware windrun = prefer_hardware ############################################################################## # For hardware that supports it, this section controls how often the # onboard clock gets updated. [StdTimeSynch] # How often to check the weather station clock for drift (in seconds) clock_check = 14400 # How much it can drift before we will correct it (in seconds) max_drift = 5 ############################################################################## # This section is for configuring the archive service. GNU nano 4.8 weewx.debug Modified [StdArchive] # If the station hardware supports data logging then the archive interval # will be downloaded from the station. Otherwise, specify it (in seconds). archive_interval = 300 # If possible, new archive records are downloaded from the station # hardware. If the hardware does not support this, then new archive # records will be generated in software. # Set the following to "software" to force software record generation. record_generation = hardware # Whether to include LOOP data in hi/low statistics loop_hilo = True # The data binding used to save archive records data_binding = wx_binding ############################################################################## # This section binds a data store to a database. [DataBindings] [[wx_binding]] # The database must match one of the sections in [Databases]. # This is likely to be the only option you would want to change. database = archive_sqlite # The name of the table within the database table_name = archive # The manager handles aggregation of data for historical summaries manager = weewx.manager.DaySummaryManager # The schema defines the structure of the database. # It is *only* used when the database is created. schema = schemas.wview_extended.schema ############################################################################## # This section defines various databases. [Databases] # A SQLite database is simply a single file [[archive_sqlite]] database_name = weewx.sdb database_type = SQLite # MySQL [[archive_mysql]] database_name = weewx database_type = MySQL ############################################################################## # This section defines defaults for the different types of databases. [DatabaseTypes] # Defaults for SQLite databases [[SQLite]] driver = weedb.sqlite # Directory in which the database files are located SQLITE_ROOT = /var/lib/weewx # Defaults for MySQL databases [[MySQL]] driver = weedb.mysql # The host where the database is located host = localhost # The user name for logging in to the host user = XXX obfuscated by wee_debug XXX # The password for the user name (quotes guard against parsing errors) password = XXX obfuscated by wee_debug XXX ############################################################################## # This section configures the internal weewx engine. [Engine] [[Services]] # This section specifies the services that should be run. They are # grouped by type, and the order of services within each group # determines the order in which the services will be run. prep_services = weewx.engine.StdTimeSynch data_services = , process_services = weewx.engine.StdConvert, weewx.engine.StdCalibrate, weewx.engine.StdQC, weewx.wxservices.StdWXCalculate archive_services = weewx.engine.StdArchive restful_services = weewx.restx.StdStationRegistry, weewx.restx.StdWunderground, weewx.restx.StdPWSweather, weewx.restx.StdCWOP, weewx.restx.StdWOW> GNU nano 4.8 weewx.debug Modified report_services = weewx.engine.StdPrint, weewx.engine.StdReport Using configuration file /etc/weewx/weewx.conf Using database binding 'wx_binding', which is bound to database 'archive_sqlite' System info General Weewx info Weewx version 4.1.1 detected. Station info Station type: Interceptor Driver: user.interceptor Currently installed extensions Extension Name Version Description interceptor 0.54 Capture weather data from HTTP requests Archive info Database name: weewx.sdb Table name: archive Version 2.0 Unit system: 1 (US) First good timestamp: 2020-06-02 20:30:00 EDT (1591144200) Last good timestamp: 2020-06-02 20:30:00 EDT (1591144200) Number of records: 0 weewx (weewx.conf) is set to use an archive interval of 300 seconds. The station hardware was not interrogated in determining archive interval. Parsed and obfuscated weewx.conf
