Howdy folks,
Been happily using wee for a few years now, and finally trying to get a
little dangerous with it now. :)
Running Wee 4.1.1 (just updated today via deb) on a RasPi with a USB
connected Vantage station. That part is working great.
I had a couple of RTLSDR modules lying around from my ADSB receiver
experiments, and decided to fire one up with rtl_433 just to see what all
is around... and I found a couple of LaCrosse sensors and a couple of
Acurite sensors nearby from which I could receive temperature and humidity
data. So I decided to try adding that capability into my existing wee
instance... yeah that didn't quite work. Glad I saved a backup of the .conf
to go back to. :)
If I'm following the logs correctly, it appears I can only have one
"station_type" defined for my weewx.conf file... and that's where I'm
failing to follow why it's not working. I'm obviously getting all my
primary data input from the Vantage, and want to keep that. I just want to
pick up the extra temperature and humidity variables I'm seeing via the SDR
and add those to my existing weather page without needing to run a separate
instance of wee... or at least not a full separate instance... this is
where I'm really not clear on the remote service part.
Here's the snippet of the SDR config section... yes I know it's all
commented out right now, for obvious reasons.
##############################################################################
#[SDR]
# This section is for the software-defined radio driver.
# The driver to use
# driver = user.sdr
# cmd = rtl_433 -M utc -F json
# path = /usr/local/bin
# [[sensor_map]]
# extraTemp1 = temperature_C.185.LaCrosse-TX141THBv2
# extraHumid1 = humidity.185.LaCrosse-TX141THBv2
# extraTemp2 = temperature_C.212.LaCrosse-TX141THBv2
# extraHumid2 = humidity.212.LaCrosse-TX141THBv2
# extraTemp3 = temperature_C.99.Acurite-606TX
# log_unknown_sensors = True
# log_unmapped_sensors = True
##############################################################################
But this is basically what I'm trying to do, read that data into those
"extraTemp#" fields, that way it can be displayed and added to the existing
graphs.
Am I going about this the wrong way? Or is this just not within the
capability of the software?
Thanks,
Ron NN5DX
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/weewx-user/e17dc755-d168-4d86-afcf-781972f5a05eo%40googlegroups.com.
