by the way, the interceptor.py I enclosed includes also this patch: https://github.com/matthewwall/weewx-interceptor/pull/64
Regards, Matthias Am Montag, 15. Juni 2020 12:27:11 UTC+2 schrieb NanoG5Kite: > > As it works for me, > > [Interceptor] > # This section is for the network traffic interceptor driver. > > # The driver to use: > driver = user.interceptor > > # Specify the hardware device to capture. Options include: > # acurite-bridge - acurite internet bridge, smarthub, or access > # observer - fine offset WH2600/HP1000/HP1003, ambient WS2902 > # lw30x - oregon scientific LW301/LW302 > # lacrosse-bridge - lacrosse GW1000U/C84612 internet bridge > # ecowitt-client - any hardware that uses the ecowitt protocol > # wu-client - any hardware that uses the weather underground protocol > # device_type = fineoffset-bridge > device_type = ecowitt-client > port = 8000 (take your port) > > And possible the patched interceptor.py - enclosed... > > Pattched according to the one from Oliver: > https://github.com/matthewwall/weewx-interceptor/issues/69 > > > > > > > > Am Montag, 15. Juni 2020 12:11:43 UTC+2 schrieb Russell Cutcliffe: >> >> Interesting... >> >> I'll check further into that. >> >> As to the custom feed, check the attached screenshot from my phone screen. >> >> This is a newish feature that rolled out to these weather stations, and >> seems to work (with maybe some time issues ;^). >> >> Russell C >> > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/bff5a38d-a356-4dc0-a8d9-01bbceda14e7o%40googlegroups.com.
