Right, this could take a while as we wait around for some rain. :-)
The easiest way to check is to report both the console display value and
weewx reported value for that same rain. We divide those to get the
correction needed. Of course if you already have a correction configured
we would need to know that too. For example, here is how I correct the
current driver:
[StdCalibrate]
[[Corrections]]
# te923.py at 0.06578 cm is lower than actual 1/36 inch bucket
# tips. This correction must be removed if future te923.py is
# fixed to report actual 0.07055555556 cm per tip directly.
rain = rain * 1.0725989
I'm also waiting for rain to confirm this works as expected. Thanks for
your response!
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/weewx-user/48126fa0-de65-4161-a1a9-561debd1750fo%40googlegroups.com.
