I use rtl_433 to decode the sensor data On Saturday, June 27, 2020 at 4:23:33 PM UTC-4, VE4PER / Andy wrote: > > I am trying to get SDR Uno & RSP1A to detect and decode signal between > 5 in 1 sensor unit to display unit so I can have a backup diagnostic to > verify that data comm link. > > I can see what appears I suspect to be it, but it looks like > cyclical/repetitive short bursts on the same approx length of xmssn as > FT8, but the bursts seem to be occurring on six different discreet UHF > freqs in a channel width of about 433.8 MHz to 434.1 MHz. > > Does anyone have any more tech info about this beyond AcuRite's brochure > that just says it is in 433 MHz band area? I can feed detected burst > audio via VAC to decoders of sorts but need to know what program to use > to detect and decode it. > > Does each sensor on the mast unit xmit on it's own? I can maybe grab a > short vid clip to show it if that might be of use? > > Thanks for any info. > > 73 & Gud DX > > >
-- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/5df39180-13f5-486d-9f14-6b85343b4f66o%40googlegroups.com.
