It looks like you are on a roll! I think you are asking why I don’t have the actual values filled in for windGust in the template.
The answer for $10m.windGust.max is that the $10m period is only understood by LoopData. If you put $10m.windGust.max in the template, it would cause an error. There is probably a way to compute the 10 minute high gust, but I didn’t bother to figure that out since the value will appear anyway on the next loop. For $day.windGust.max, adding it to the template should work just fine. It’s not needed. In fact, none of the values are needed since they are overwritten by the JavaScript. >> On Jul 16, 2020, at 5:26 AM, [email protected] <[email protected]> >> wrote: > Hi John, it could even add winDir and barometer and humidity! > What I would like to know why is enough for the two windGust values only the > id in index.html.tmpl > https://affolter.familyds.net/wetter/live/ > > <loop02.jpg> > > > [email protected] schrieb am Mittwoch, 15. Juli 2020 um 22:32:15 UTC+2: >> Thanks for sending those links. >> >> Again, I don’t think it’s necessary to move the file to ram disk. With >> modern SSDs and wear leveling, and especially with a file this size. You >> might want to do some web searches before deciding if its worth the effort. >> >>>> On Jul 15, 2020, at 1:14 PM, '[email protected]' via weewx-user >>>> <[email protected]> wrote: >>> John, >>> >>> so maybe a project for the next days to put the loop-data.tx into ram and >>> serve it via apache2. >>> The WeatherBoard site: >>> >>> https://livewetter.hcpeters.de >>> >>> and my main weather site: >>> >>> https://wetter.hcpeters.de/ >>> >>> . >>> The gauges you see on the main site seems to use Javascript so that's why I >>> asked...! :-D >>> At the moment I just give a fixed value and render the entire site every >>> minute...near realtime... ;-) >>> >>> But diving into java would be a big task.... not sure I'm ready for >>> that....already fighting with Python...! :-D >>> >>> Regards, >>> >>> Christian >>> >>> >>> >>> [email protected] schrieb am Mittwoch, 15. Juli 2020 um 21:59:47 UTC+2: >>>> I do not personally regard it as a problem. Others may have a different >>>> opinion. >>>> >>>> It certainly is not necessary to have it on the SSD, but you would have to >>>> configure apache2 (or whatever web server you are using), to be able to >>>> serve loop-data.txt. >>>> >>>> BTW, is your site visible externally? If so, would you send a link? >>>> >>>>>> On Jul 15, 2020, at 12:46 PM, '[email protected]' via weewx-user >>>>>> <[email protected]> wrote: >>>>> John, >>>> >>>>> >>>>> is this a problem to write the loop-data.txt file every 2sec on a SSD >>>>> regarding durability!? >>>>> Or would it be better to place it on a ramdisk (tmpfs) like /dev/shm ... >>>>> >>>>> Regards, >>>>> >>>>> Christian >>>>> >>>>> [email protected] schrieb am Mittwoch, 15. Juli 2020 um 21:35:27 UTC+2: >>>>>> Great news! >>>>>> >>>>>> The purpose of LoopData is to be able to add to any skin, but it does >>>>>> require knowledge of JavaScript. >>>>>> >>>>>>>> On Jul 15, 2020, at 12:33 PM, John Kline <[email protected]> wrote: >>>>>>> >>>>>> >>>>>>> >>>>>>> tail -f loop-data.txt won’t work because a new file is created on every >>>>>>> loop. >>>>>>> >>>>>>> You can use: >>>>>>> watch cat loop-data.txt >>>>>>> >>>>>>> You screen shots are not of any javascript errors that might be on the >>>>>>> page. >>>>>>> >>>>>>> Would you send me the following file? >>>>>>> /var/www/html/weewx/weatherboard/index.html >>>>>>> >>>>>>>>> On Jul 15, 2020, at 12:07 PM, '[email protected]' via weewx-user >>>>>>>>> <[email protected]> wrote: >>>>>>>> ok...last post for now...maybe this is the problem, see screenshot... >>>>>>>> >>>>>>>> [email protected] schrieb am Mittwoch, 15. Juli 2020 um 20:54:42 >>>>>>>> UTC+2: >>>>>>>>> ...and the error form the browser after changes as screenshot.... >>>>>>>>> >>>>>>>>> [email protected] schrieb am Mittwoch, 15. Juli 2020 um 20:49:18 >>>>>>>>> UTC+2: >>>>>>>>>> Ok, >>>>>>>>>> cat /var/www/html/weewx/loop-data.txt >>>>>>>>>> >>>>>>>>>> {"current.dateTime.raw": 1594838795, >>>>>>>>>> "current.windDir.ordinal_compass": "NW", "day.rain.sum": "3,0 mm", >>>>>>>>>> "current.dewpoint": "8,9\u00b0C", "current.outTemp": "16,7\u00b0C", >>>>>>>>>> "current.rainRate": "0,0 mm/h", "current.windSpeed": "3,2 km/h", >>>>>>>>>> "day.windGust.max": "27,4 km/h", "10m.windGust.max": "8,0 km/h", >>>>>>>>>> "current.windSpeed.raw": 3.218688} >>>>>>>>>> >>>>>>>>>> (with missing "current.windSpeed.raw") >>>>>>>>>> >>>>>>>>>> .... >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> [email protected] schrieb am Mittwoch, 15. Juli 2020 um >>>>>>>>>> 20:39:01 UTC+2: >>>>>>>>>>> John, >>>>>>>>>>> >>>>>>>>>>> strange...maybe I really should delete anything and start from >>>>>>>>>>> scratch? >>>>>>>>>>> >>>>>>>>>>> But before one more try.. I'm sure the loopdata is made, see some >>>>>>>>>>> 'cat' of the file: >>>>>>>>>>> cat /var/www/html/weewx/loop-data.txt >>>>>>>>>>> {"current.dateTime.raw": 1594836959, >>>>>>>>>>> "current.windDir.ordinal_compass": "NW", "day.rain.sum": "3,0 mm", >>>>>>>>>>> "current.dewpoint": "8,7\u00b0C", "current.outTemp": "17,1\u00b0C", >>>>>>>>>>> "current.rainRate": "1,2 mm/h", "current.windSpeed": "3,2 km/h", >>>>>>>>>>> "day.windGust.max": "27,4 km/h", "10m.windGust.max": "14,5 km/h"} >>>>>>>>>>> >>>>>>>>>>> cat /var/www/html/weewx/loop-data.txt >>>>>>>>>>> {"current.dateTime.raw": 1594836976, >>>>>>>>>>> "current.windDir.ordinal_compass": "NNW", "day.rain.sum": "3,0 mm", >>>>>>>>>>> "current.dewpoint": "8,7\u00b0C", "current.outTemp": "17,1\u00b0C", >>>>>>>>>>> "current.rainRate": "1,0 mm/h", "current.windSpeed": "8,0 km/h", >>>>>>>>>>> "day.windGust.max": "27,4 km/h", "10m.windGust.max": "14,5 km/h"} >>>>>>>>>>> >>>>>>>>>>> cat /var/www/html/weewx/loop-data.txt >>>>>>>>>>> {"current.dateTime.raw": 1594836979, >>>>>>>>>>> "current.windDir.ordinal_compass": "NNW", "day.rain.sum": "3,0 mm", >>>>>>>>>>> "current.dewpoint": "8,7\u00b0C", "current.outTemp": "17,1\u00b0C", >>>>>>>>>>> "current.rainRate": "1,0 mm/h", "current.windSpeed": "6,4 km/h", >>>>>>>>>>> "day.windGust.max": "27,4 km/h", "10m.windGust.max": "14,5 km/h"} >>>>>>>>>>> >>>>>>>>>>> cat /var/www/html/weewx/loop-data.txt >>>>>>>>>>> {"current.dateTime.raw": 1594836981, >>>>>>>>>>> "current.windDir.ordinal_compass": "NNW", "day.rain.sum": "3,0 mm", >>>>>>>>>>> "current.dewpoint": "8,7\u00b0C", "current.outTemp": "17,1\u00b0C", >>>>>>>>>>> "current.rainRate": "1,0 mm/h", "current.windSpeed": "6,4 km/h", >>>>>>>>>>> "day.windGust.max": "27,4 km/h", "10m.windGust.max": "14,5 km/h"} >>>>>>>>>>> >>>>>>>>>>> cat /var/www/html/weewx/loop-data.txt >>>>>>>>>>> {"current.dateTime.raw": 1594836985, >>>>>>>>>>> "current.windDir.ordinal_compass": "NW", "day.rain.sum": "3,0 mm", >>>>>>>>>>> "current.dewpoint": "8,7\u00b0C", "current.outTemp": "17,1\u00b0C", >>>>>>>>>>> "current.rainRate": "1,0 mm/h", "current.windSpeed": "4,8 km/h", >>>>>>>>>>> "day.windGust.max": "27,4 km/h", "10m.windGust.max": "14,5 km/h"}# >>>>>>>>>>> >>>>>>>>>>> What I think is a little bit strange, a: >>>>>>>>>>> >>>>>>>>>>> tail -f /var/www/html/weewx/loop-data.txt >>>>>>>>>>> >>>>>>>>>>> doesn't show any changes after two seconds? Is there some >>>>>>>>>>> caching....I dont use the rsync.... Anyway... >>>>>>>>>>> ' >>>>>>>>>>> by the way, I sometimes see floats at the time value like >>>>>>>>>>> "current.dateTime.raw": 1594837199.0..? >>>>>>>>>>> >>>>>>>>>>> Yes, I added this >>>>>>>>>>> >>>>>>>>>>> report_services = weewx.engine.StdPrint, weewx.engine.StdReport, >>>>>>>>>>> user.loopdata.LoopData >>>>>>>>>>> >>>>>>>>>>> and if I turn on debug=1 I see the file is written every loop. >>>>>>>>>>> a >>>>>>>>>>> cat /var/www/html/weewx/loop-data.txt: >>>>>>>>>>> {"current.dateTime.raw": 1594837649, >>>>>>>>>>> "current.windDir.ordinal_compass": "N", "day.rain.sum": "3,0 mm", >>>>>>>>>>> "current.dewpoint": "9,0\u00b0C", "current.outTemp": "16,8\u00b0C", >>>>>>>>>>> "current.rainRate": "0,0 mm/h", "current.windSpeed": "4,8 km/h", >>>>>>>>>>> "day.windGust.max": "27,4 km/h", "10m.windGust.max": "11,3 km/h"} >>>>>>>>>>> {"current.dateTime.raw": 1594837577, >>>>>>>>>>> "current.windDir.ordinal_compass": "NW", "day.rain.sum": "3,0 mm", >>>>>>>>>>> "current.dewpoint": "9,1\u00b0C", "current.outTemp": "16,9\u00b0C", >>>>>>>>>>> "current.rainRate": "0,0 mm/h", "current.windSpeed": "6,4 km/h", >>>>>>>>>>> "day.windGust.max": "27,4 km/h", "10m.windGust.max": "11,3 km/h"} >>>>>>>>>>> >>>>>>>>>>> a ls -laht /var/www/html/weewx/weatherboard >>>>>>>>>>> >>>>>>>>>>> drwxr-xr-x 12 www-data www-data 4,0K Jul 15 20:28 .. >>>>>>>>>>> drwxr-xr-x 2 root root 4,0K Jul 15 20:27 . >>>>>>>>>>> -rw-r--r-- 1 root root 12K Jul 15 20:27 index.html >>>>>>>>>>> -rw-r--r-- 1 root root 1,7K Jul 15 19:41 weatherboard.css >>>>>>>>>>> -rw-r--r-- 1 root root 3,5K Jul 15 19:41 favicon.ico >>>>>>>>>>> >>>>>>>>>>> So I'm not familiar with .js, I hope I opened the right one in my >>>>>>>>>>> FF browser. Never did anything with JavaScript! :-O But I got some >>>>>>>>>>> errors, see attached screenshot. >>>>>>>>>>> Thanks for your patience! >>>>>>>>>>> Maybe something is blocked by Apache2 (I host the site by >>>>>>>>>>> myself).... >>>>>>>>>>> >>>>>>>>>>> Regards, >>>>>>>>>>> >>>>>>>>>>> Christian >>>>>>>>>>> [email protected] schrieb am Mittwoch, 15. Juli 2020 um 20:12:27 >>>>>>>>>>> UTC+2: >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> Hi Christian, >>>>>>>>>>>> >>>>>>>>>>>> wee_extension should not have been using python2 if you did a >>>>>>>>>>>> python3 install of weewx; but let’s put that aside. >>>>>>>>>>>> >>>>>>>>>>>> Of course, you should care that WeatherBoard is not updating on >>>>>>>>>>>> every loop cycle, that’s the whole point of it. >>>>>>>>>>>> >>>>>>>>>>>> I might be better if you deleted all you have done manually and do >>>>>>>>>>>> a proper install, but let’s try to work with what you have. >>>>>>>>>>>> >>>>>>>>>>>> Are you sure loop-data.txt is being generated? >>>>>>>>>>>> >>>>>>>>>>>> If in weewx.conf, under [Engine][[Services]], on the >>>>>>>>>>>> report_services line, do you see user.loopdata.LoopData? >>>>>>>>>>>> >>>>>>>>>>>> Would you send me a copy of /var/www/html/weewx/loop-data.txt? >>>>>>>>>>>> >>>>>>>>>>>> Would you send me a directory listing of >>>>>>>>>>>> /var/www/html/weewx/weatherboard? >>>>>>>>>>>> >>>>>>>>>>>> Lastly, from your browser, would you bring up the JavaScript >>>>>>>>>>>> console and tell me the error(s) you see? >>>>>>>>>>>> >>>>>>>>>>>>>> On Jul 15, 2020, at 10:53 AM, 'Christian Peters' via weewx-user >>>>>>>>>>>>>> <[email protected]> wrote: >>>>>>>>>>>>> >>>>>>>>>>>>> John, >>>>>>>>>>>>> >>>>>>>>>>>>> I struggeld installing the extension. I got: >>>>>>>>>>>>> Traceback (most recent call last): >>>>>>>>>>>>> File "/usr/share/weewx/wee_extension", line 13, in <module> >>>>>>>>>>>>> import weecfg.extension >>>>>>>>>>>>> File "/usr/share/weewx/weecfg/__init__.py", line 22, in <module> >>>>>>>>>>>>> import configobj >>>>>>>>>>>>> ImportError: No module named configobj >>>>>>>>>>>>> >>>>>>>>>>>>> ..but the module was installed! >>>>>>>>>>>>> I then figured out that wee_extension uses python2 but not >>>>>>>>>>>>> python3 so the module was missing in python 2! ;-) >>>>>>>>>>>>> I treid to gove Python3 a try with weewx this time as I >>>>>>>>>>>>> reinstalled it! >>>>>>>>>>>>> I changed in we_extension the first line to >>>>>>>>>>>>> >>>>>>>>>>>>> #!/usr/bin/env python3 >>>>>>>>>>>>> >>>>>>>>>>>>> and it works. >>>>>>>>>>>>> >>>>>>>>>>>>> But first I installed the loop-data exxtension by hand...but I >>>>>>>>>>>>> think all is in the right place as the loop-data.txt is build. >>>>>>>>>>>>> >>>>>>>>>>>>> The WeatherBoardReport section in weewx.conf: >>>>>>>>>>>>> >>>>>>>>>>>>> [[WeatherBoardReport]] >>>>>>>>>>>>> HTML_ROOT = /var/www/html/weewx/weatherboard >>>>>>>>>>>>> enable = true >>>>>>>>>>>>> skin = WeatherBoard >>>>>>>>>>>>> [[[Extras]]] >>>>>>>>>>>>> meta_title = Live-Wetter Langenseifen, Hessen >>>>>>>>>>>>> Weather at a Glance WeatherBoard™ >>>>>>>>>>>>> title = Live-Wetter Langenseifen Hessen >>>>>>>>>>>>> WeatherBoard™ >>>>>>>>>>>>> subtitle = Fortlaufend aktualisiert. >>>>>>>>>>>>> logo = "" >>>>>>>>>>>>> loop_data_file = ../loop-data.txt >>>>>>>>>>>>> contact_email = "" >>>>>>>>>>>>> expiration_time = 4 >>>>>>>>>>>>> page_update_pwd = foobar >>>>>>>>>>>>> googleAnalyticsId = "" >>>>>>>>>>>>> analytics_host = "" >>>>>>>>>>>>> show_purple = False >>>>>>>>>>>>> [[[Labels]]] >>>>>>>>>>>>> [[[[Generic]]]] >>>>>>>>>>>>> air_quality_index = Air Quality Index >>>>>>>>>>>>> contact = Kontakt >>>>>>>>>>>>> legend = Legende >>>>>>>>>>>>> rain_today = Regen heute >>>>>>>>>>>>> ten_min_max_gust = 10min Boee >>>>>>>>>>>>> time_of_day = Uhrzeit >>>>>>>>>>>>> high_gust_today = Booe max. >>>>>>>>>>>>> [[[Units]]] >>>>>>>>>>>>> [[[[StringFormats]]]] >>>>>>>>>>>>> mile_per_hour = %.1f >>>>>>>>>>>>> degree_C = %.1f >>>>>>>>>>>>> km_per_hour = %.1f >>>>>>>>>>>>> degree_F = %.1f >>>>>>>>>>>>> >>>>>>>>>>>>> This section I added at the end of weewx.conf by hand: >>>>>>>>>>>>> >>>>>>>>>>>>> # >>>>>>>>>>>>> ==================================================================================== >>>>>>>>>>>>> # Options for extension 'weewx-loopdata' >>>>>>>>>>>>> >>>>>>>>>>>>> [LoopData] >>>>>>>>>>>>> [[FileSpec]] >>>>>>>>>>>>> loop_data_dir = /var/www/html/weewx >>>>>>>>>>>>> filename = loop-data.txt >>>>>>>>>>>>> [[Formatting]] >>>>>>>>>>>>> target_report = WeatherBoardReport >>>>>>>>>>>>> [[RsyncSpec]] >>>>>>>>>>>>> enable = false >>>>>>>>>>>>> remote_server = foo.bar.com >>>>>>>>>>>>> remote_user = root >>>>>>>>>>>>> remote_dir = /var/www/html >>>>>>>>>>>>> compress = False >>>>>>>>>>>>> log_success = False >>>>>>>>>>>>> ssh_options = -o ConnectTimeout=1 >>>>>>>>>>>>> timeout = 1 >>>>>>>>>>>>> skip_if_older_than = 3 >>>>>>>>>>>>> [[Include]] >>>>>>>>>>>>> fields = current.dateTime.raw, >>>>>>>>>>>>> current.windDir.ordinal_compass, day.rain.sum, current.dewpoint, >>>>>>>>>>>>> current.outTemp, current.rainRate, current.windSpeed, >>>>>>>>>>>>> day.windGust.max, 10m.windGust.max, current.windSpeed >>>>>>>>>>>>> >>>>>>>>>>>>> But there is even a skin.conf at /etc/weew/skinWeatherboard/ ... >>>>>>>>>>>>> >>>>>>>>>>>>> # Copyright (C)2020 by John A Kline ([email protected]) >>>>>>>>>>>>> # Distributed under the terms of the GNU Public License (GPLv3) >>>>>>>>>>>>> # See LICENSE for your rights. >>>>>>>>>>>>> >>>>>>>>>>>>> [Extras] >>>>>>>>>>>>> # Fill path of loop data file. If not a full path, >>>>>>>>>>>>> # it will be interpreted as relative to this skin's HTML_ROOT. >>>>>>>>>>>>> loop_data_file = '../loop-data.txt' >>>>>>>>>>>>> >>>>>>>>>>>>> # Refresh rate is the rate at which the report should refresh >>>>>>>>>>>>> with >>>>>>>>>>>>> # the latest readings. A good choice is the rate at which >>>>>>>>>>>>> your >>>>>>>>>>>>> # weather stations driver is feeing loop data. Expressed in >>>>>>>>>>>>> units >>>>>>>>>>>>> # of seconds. Default: 2 seconds. >>>>>>>>>>>>> refresh_rate = 2 >>>>>>>>>>>>> >>>>>>>>>>>>> # Fill in a sutiable title/subtitle for the report. >>>>>>>>>>>>> title = 'my-weather-website.com WeatherBoard™' >>>>>>>>>>>>> subtitle = 'Updated continuously.' >>>>>>>>>>>>> >>>>>>>>>>>>> # If you have a log, specify it here. >>>>>>>>>>>>> logo = '' >>>>>>>>>>>>> >>>>>>>>>>>>> # Fill in contact email to display on the report. >>>>>>>>>>>>> contact_email = '[email protected]' >>>>>>>>>>>>> >>>>>>>>>>>>> # Choose your own password. without ?page_update_pwd='xxx' >>>>>>>>>>>>> # at the end of the URL, auto updating will timeout. >>>>>>>>>>>>> # Note: This password will be viaible to users looking >>>>>>>>>>>>> # at page source in their browser. >>>>>>>>>>>>> page_update_pwd = 'foobar' >>>>>>>>>>>>> >>>>>>>>>>>>> # Page expiration time is the number of hours the report will >>>>>>>>>>>>> request >>>>>>>>>>>>> # loop data and update. After which, a mouse clice will be >>>>>>>>>>>>> needed >>>>>>>>>>>>> # to start refreshing again. Default 4 hours. >>>>>>>>>>>>> expiration_time = 4 >>>>>>>>>>>>> >>>>>>>>>>>>> # If you have a google analytics id, uncomment the following >>>>>>>>>>>>> line >>>>>>>>>>>>> # and fill in the ID. >>>>>>>>>>>>> # googleAnalyticsId = >>>>>>>>>>>>> # If you only want to use the ID on a certain host, uncomment >>>>>>>>>>>>> the >>>>>>>>>>>>> # following line and fill in the hostname. >>>>>>>>>>>>> # analytics_host = www.example.com >>>>>>>>>>>>> >>>>>>>>>>>>> # If a PurpleAir sensor is set up and both weewx-purple and >>>>>>>>>>>>> # purple-proxy are installed, or just weewx-purple is >>>>>>>>>>>>> installed; >>>>>>>>>>>>> # change the 'False' below to 'True'. >>>>>>>>>>>>> # The weewx-purple extension can be found here: >>>>>>>>>>>>> # https://github.com/chaunceygardiner/weewx-purple >>>>>>>>>>>>> # The purple-proxy server can be found here: >>>>>>>>>>>>> # https://github.com/chaunceygardiner/purple-proxy >>>>>>>>>>>>> # It is preferable to install both weewx-purple and purple >>>>>>>>>>>>> proxy >>>>>>>>>>>>> # as the proxy returns averages over the archive period (as >>>>>>>>>>>>> # opposed to one shot readings). >>>>>>>>>>>>> show_purple = False >>>>>>>>>>>>> >>>>>>>>>>>>> [Labels] >>>>>>>>>>>>> [[Generic]] >>>>>>>>>>>>> # Some specialized labels >>>>>>>>>>>>> air_quality_index = Air Quality Index >>>>>>>>>>>>> contact = Contact >>>>>>>>>>>>> legend = Legend >>>>>>>>>>>>> rain_today = Rain Today >>>>>>>>>>>>> ten_min_max_gust = 10m Gust >>>>>>>>>>>>> time_of_day = Time >>>>>>>>>>>>> high_gust_today = Today's High Gust >>>>>>>>>>>>> >>>>>>>>>>>>> [CheetahGenerator] >>>>>>>>>>>>> encoding = html_entities >>>>>>>>>>>>> [[ToDate]] >>>>>>>>>>>>> [[[index]]] >>>>>>>>>>>>> template = index.html.tmpl >>>>>>>>>>>>> >>>>>>>>>>>>> [CopyGenerator] >>>>>>>>>>>>> copy_once = favicon.ico, weatherboard.css >>>>>>>>>>>>> copy_always = , >>>>>>>>>>>>> >>>>>>>>>>>>> [Generators] >>>>>>>>>>>>> generator_list = weewx.cheetahgenerator.CheetahGenerator, >>>>>>>>>>>>> weewx.reportengine.CopyGenerator >>>>>>>>>>>>> >>>>>>>>>>>>> Do I have to care about!? >>>>>>>>>>>>> >>>>>>>>>>>>> The WeatherBoard site seems to update with the interval given in >>>>>>>>>>>>> weewx (here 1min)....but the JS seems not to work? >>>>>>>>>>>>> It's starnge too that there are some obersavervations missing and >>>>>>>>>>>>> the time not catched and printed on the WB site...but Temp is >>>>>>>>>>>>> changein (all 1min while refreshing)? >>>>>>>>>>>>> >>>>>>>>>>>>> Hope you could figure something out of my setting!? >>>>>>>>>>>>> >>>>>>>>>>>>> Thanks in advance! >>>>>>>>>>>>> >>>>>>>>>>>>> Christian >>>>>>>>>>>>> >>>>>>>>>>>>> Am Mittwoch, 15. Juli 2020 16:11:06 UTC+2 schrieb John Kline: >>>>>>>>>>>>>> >>>>>>>>>>>>>> Hi Christian, >>>>>>>>>>>>>> >>>>>>>>>>>>>> Please let me know what was tricky about installing loop-data. >>>>>>>>>>>>>> >>>>>>>>>>>>>> Since you are getting loop-data, I suspect that the LoopData >>>>>>>>>>>>>> extension and the WeatherBoard extension don’t agree about where >>>>>>>>>>>>>> to find the loop-data.txt file. >>>>>>>>>>>>>> >>>>>>>>>>>>>> Would you send both the LoopData section and the WeatherBoard >>>>>>>>>>>>>> section of weewx.conf? >>>>>>>>>>>>>> >>>>>>>>>>>>>> Cheers, >>>>>>>>>>>>>> John >>>>>>>>>>>>>> >>>>>>>>>>>>>>>> On Jul 15, 2020, at 5:16 AM, 'Christian Peters' via weewx-user >>>>>>>>>>>>>>>> <[email protected]> wrote: >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> John, >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> I just installed the loop-data extension and the weatherboard >>>>>>>>>>>>>>> skin to give it a try. :-) >>>>>>>>>>>>>>> A really nice extension. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> It was a bit tricky to install it but I hope loop-data is >>>>>>>>>>>>>>> running. I get this >>>>>>>>>>>>>>> /var/www/html/weewx/loop-data.txt file with this text: >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> {"current.dateTime.raw": 1594814866, >>>>>>>>>>>>>>> "current.windDir.ordinal_compass": "N", "day.rain.sum": "2,6 >>>>>>>>>>>>>>> mm", "current.dewpoint": "11,3\u00b0C", "current.outTemp": >>>>>>>>>>>>>>> "20,3\u00b0C", "current.rainRate": "0,0 mm/h", >>>>>>>>>>>>>>> "current.windSpeed": "6,4 km/h", "day.windGust.max": "19,3 >>>>>>>>>>>>>>> km/h", "10m.windGust.max": "11,3 km/h"} >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> It updates every 2 sec, winddir for example changes....so it >>>>>>>>>>>>>>> seems to work I think. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> What not works it the wartherboard skin. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> https://livewetter.hcpeters.de >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> It doesn't update (only if I do a manual refresh on the borwser >>>>>>>>>>>>>>> and not every time it really refreshes to the most recent >>>>>>>>>>>>>>> values). >>>>>>>>>>>>>>> and there is something not working as the time field is >>>>>>>>>>>>>>> missing, even 10m.windGust.max and day.windGust.max ... see >>>>>>>>>>>>>>> screenshot. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Am I doing something wrong? I got the most recent .zip files >>>>>>>>>>>>>>> from your site (today). But I'm not sure where to tweak the >>>>>>>>>>>>>>> weatherboard skin ( in weewx.conf or in >>>>>>>>>>>>>>> weatherboard/skin/skin.conf ) ? >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Thanks in advance for any idea or hint! >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Regards, >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Christian >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>> You received this message because you are subscribed to the >>>>>>>>>>>>>>> Google Groups "weewx-user" group. >>>>>>>>>>>>>>> To unsubscribe from this group and stop receiving emails from >>>>>>>>>>>>>>> it, send an email to [email protected]. >>>>>>>>>>>>>>> To view this discussion on the web visit >>>>>>>>>>>>>>> https://groups.google.com/d/msgid/weewx-user/adaaa9c1-dbdd-4534-bda8-784875ce2103o%40googlegroups.com. >>>>>>>>>>>>>>> <weatherboard.png> >>>>>>>>>>>>> >>>>>>>>>>>>> -- >>>>>>>>>>>>> You received this message because you are subscribed to the >>>>>>>>>>>>> Google Groups "weewx-user" group. >>>>>>>>>>>> >>>>>>>>>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>>>>>>>>> send an email to [email protected]. >>>>>>>>>>>>> To view this discussion on the web visit >>>>>>>>>>>>> https://groups.google.com/d/msgid/weewx-user/155cc6a5-2234-44a0-94f2-99f6fbda1057o%40googlegroups.com. >>>>>>>> >>>>>>>> -- >>>>>>>> You received this message because you are subscribed to the Google >>>>>>>> Groups "weewx-user" group. >>>>>>>> To unsubscribe from this group and stop receiving emails from it, send >>>>>>>> an email to [email protected]. >>>>>>>> To view this discussion on the web visit >>>>>>>> https://groups.google.com/d/msgid/weewx-user/c28e82d7-4a36-42f2-832c-4eed5cb5438dn%40googlegroups.com. >>>>>>>> <Bildschirmfoto 2020-07-15 um 21.05.54.png> >>>>> >>>>> -- >>>>> You received this message because you are subscribed to the Google Groups >>>>> "weewx-user" group. >>>>> To unsubscribe from this group and stop receiving emails from it, send an >>>>> email to [email protected]. >>>> >>>>> To view this discussion on the web visit >>>>> https://groups.google.com/d/msgid/weewx-user/31847230-f79f-4b2d-a74c-e2c167bf1c2dn%40googlegroups.com. >>> >>> -- >>> You received this message because you are subscribed to the Google Groups >>> "weewx-user" group. >>> To unsubscribe from this group and stop receiving emails from it, send an >>> email to [email protected]. >> >>> To view this discussion on the web visit >>> https://groups.google.com/d/msgid/weewx-user/82a39a64-d6b0-4b76-8791-0d1c801c975an%40googlegroups.com. > > -- > You received this message because you are subscribed to the Google Groups > "weewx-user" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/weewx-user/a4aa08bf-45d4-45bd-b867-89d280396b3an%40googlegroups.com. > <loop02.jpg> -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/29FEF350-D303-46AD-9E07-B6548F0A90A2%40johnkline.com.
