WOW..I MUST be an expert hhaha.
Glad it works.
I don't have raspberry but I took that code from my Ubuntu server, so I 
guess it would work.
I run proxmox and 5 virtual machines on a Dell  r210 ii and it only draws 
35 watts.


On Sunday, 19 July 2020 at 00:38:13 UTC+10 Michael Grossie wrote:

> Greg - works like a charm - thanks for the advice and for explaining -
>
>  
>  
> Michael H Grossie
> [email protected]
>
>
> On Sat, Jul 18, 2020 at 5:55 AM Greg from Oz <[email protected]> wrote:
>
>> Maybe if you create a weewx.conf file in /etc/apache2/sites-available and 
>> call it weewx.conf
>>
>> Put this in the file:
>>
>> Alias /weewx "/home/weewx/public_html"
>>     <Directory "/home/weewx/public_html">
>>         Options Indexes MultiViews
>>         AllowOverride None
>>         Order allow,deny
>>         Allow from all
>>         Require all granted
>>     </Directory>
>>
>> Save the file.
>>
>>  Then run sudo a2ensite weewx.conf   (this enables the site)
>>
>> Then reload apache
>>
>> Then go to http://localhost/weewx
>>
>> I am not an expert either and don't have a raspbaerry pi running apache.
>>
>> Good luck. I don't guarantee this will work but hey! you never know. 
>>
>>
>> On Saturday, 18 July 2020 at 12:33:05 UTC+10 Michael Grossie wrote:
>>
>>> I have found the index.html file in /home/weewx/public_html. I still 
>>> cannot access it with http://localhost/weewx - I need to use the full 
>>> path - but I can get to it and it does show data.
>>>  
>>> Michael H Grossie
>>> [email protected]
>>>
>>>
>>> On Mon, Jul 13, 2020 at 12:49 PM Michael Grossie <[email protected]> 
>>> wrote:
>>>
>>>> Installed sqlitebrowser. Opened weewx.sdb and did see records had been 
>>>> created. So, why does it not write to "weewx/public_html?"
>>>>  
>>>>  
>>>> Michael H Grossie
>>>> [email protected]
>>>>
>>>>
>>>> On Mon, Jul 13, 2020 at 12:30 PM Michael Grossie <[email protected]> 
>>>> wrote:
>>>>
>>>>> After reloading cheetah, I rebooted, started weewx and apache2. I 
>>>>> opened a browser and went to http://localhost/weewx (as directed in 
>>>>> the User Guide) and received the 404 page not found error.
>>>>>
>>>>> I then ran "sudo /etc/init.d/weewx status -l"  and received -
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> *pi@raspberrypi:/home/weewx $ sudo /etc/init.d/weewx status -l● 
>>>>> weewx.service - LSB: weewx weather system   Loaded: loaded 
>>>>> (/etc/init.d/weewx; generated; vendor preset: enabled)   Active: active 
>>>>> (running) since Mon 2020-07-13 12:03:01 CDT; 18min ago     Docs: 
>>>>> man:systemd-sysv-generator(8)  Process: 281 ExecStart=/etc/init.d/weewx 
>>>>> start (code=exited, status=0/SUCCESS)    Tasks: 2 (limit: 4915)   CGroup: 
>>>>> /system.slice/weewx.service           └─497 /usr/bin/python2 
>>>>> /home/weewx/bin/weewxd --daemon --pidfile=/var/run/weewx.pid 
>>>>> /home/weewx/weewx.confJul 13 12:15:16 raspberrypi weewxd[497]: weewx[497] 
>>>>> INFO weewx.manager: Added record 2020-07-13 12:15:00 CDT (1594660500) to 
>>>>> database 'weewx.sdb'Jul 13 12:15:16 raspberrypi weewxd[497]: weewx[497] 
>>>>> INFO weewx.manager: Added record 2020-07-13 12:15:00 CDT (1594660500) to 
>>>>> daily summary …weewx.sdb'Jul 13 12:15:21 raspberrypi weewxd[497]: 
>>>>> weewx[497] INFO weewx.cheetahgenerator: Generated 8 files for report 
>>>>> SeasonsReport in 3.39 secondsJul 13 12:15:25 raspberrypi weewxd[497]: 
>>>>> weewx[497] INFO weewx.imagegenerator: Generated 15 images for report 
>>>>> SeasonsReport in 3.65 secondsJul 13 12:15:25 raspberrypi weewxd[497]: 
>>>>> weewx[497] INFO weewx.reportengine: Copied 0 files to 
>>>>> /home/weewx/public_htmlJul 13 12:20:16 raspberrypi weewxd[497]: 
>>>>> weewx[497] 
>>>>> INFO weewx.manager: Added record 2020-07-13 12:20:00 CDT (1594660800) to 
>>>>> database 'weewx.sdb'Jul 13 12:20:16 raspberrypi weewxd[497]: weewx[497] 
>>>>> INFO weewx.manager: Added record 2020-07-13 12:20:00 CDT (1594660800) to 
>>>>> daily summary …weewx.sdb'Jul 13 12:20:21 raspberrypi weewxd[497]: 
>>>>> weewx[497] INFO weewx.cheetahgenerator: Generated 8 files for report 
>>>>> SeasonsReport in 3.79 secondsJul 13 12:20:34 raspberrypi weewxd[497]: 
>>>>> weewx[497] INFO weewx.imagegenerator: Generated 30 images for report 
>>>>> SeasonsReport in 12.33 secondsJul 13 12:20:34 raspberrypi weewxd[497]: 
>>>>> weewx[497] INFO weewx.reportengine: Copied 0 files to 
>>>>> /home/weewx/public_htmlHint: Some lines were ellipsized, use -l to show 
>>>>> in 
>>>>> full.*
>>>>>  
>>>>> Now I see that records were added and reports generated, but nothing 
>>>>> transferred to /home/weewx/public_html
>>>>> I am still missing something - I don't know if I have a program 
>>>>> installed to view the contents of weewx.sdb
>>>>> Michael H Grossie
>>>>> [email protected]
>>>>>
>>>>>
>>>>> On Mon, Jul 13, 2020 at 11:53 AM Michael Grossie <
>>>>> [email protected]> wrote:
>>>>>
>>>>>> In trying to find folders and files are at, they are all in the 
>>>>>> proper places (based on the list in the User Guide) - I ran 
>>>>>> "sudo /etc/init.d/weewx status -l" from the /home/weewx directory.  I 
>>>>>> received the following -
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> *pi@raspberrypi:/home/weewx $ sudo /etc/init.d/weewx status -ls● 
>>>>>> weewx.service - LSB: weewx weather system   Loaded: loaded 
>>>>>> (/etc/init.d/weewx; generated; vendor preset: enabled)   Active: active 
>>>>>> (running) since Mon 2020-07-13 11:10:24 CDT; 28min ago     Docs: 
>>>>>> man:systemd-sysv-generator(8)  Process: 281 ExecStart=/etc/init.d/weewx 
>>>>>> start (code=exited, status=0/SUCCESS)    Tasks: 2 (limit: 4915)   
>>>>>> CGroup: 
>>>>>> /system.slice/weewx.service           └─558 /usr/bin/python2 
>>>>>> /home/weewx/bin/weewxd --daemon --pidfile=/var/run/weewx.pid 
>>>>>> /home/weewx/weewx.confJul 13 11:35:18 raspberrypi weewxd[558]: 
>>>>>> weewx[558] 
>>>>>> ERROR weewx.reportengine:         ****    File 
>>>>>> "/home/weewx/bin/weewx/reporteng…0, in runJul 13 11:35:18 raspberrypi 
>>>>>> weewxd[558]: weewx[558] ERROR weewx.reportengine:         ****      obj 
>>>>>> = 
>>>>>> weeutil.weeutil.get_object(generator)(Jul 13 11:35:18 raspberrypi 
>>>>>> weewxd[558]: weewx[558] ERROR weewx.reportengine:         ****    File 
>>>>>> "/home/weewx/bin/weeutil/weeutil…et_objectJul 13 11:35:18 raspberrypi 
>>>>>> weewxd[558]: weewx[558] ERROR weewx.reportengine:         ****      mod 
>>>>>> = 
>>>>>> __import__(module)Jul 13 11:35:18 raspberrypi weewxd[558]: weewx[558] 
>>>>>> ERROR 
>>>>>> weewx.reportengine:         ****    File 
>>>>>> "/home/weewx/bin/weewx/cheetahge… 
>>>>>> <module>Jul 13 11:35:18 raspberrypi weewxd[558]: weewx[558] ERROR 
>>>>>> weewx.reportengine:         ****      import Cheetah.FiltersJul 13 
>>>>>> 11:35:18 
>>>>>> raspberrypi weewxd[558]: weewx[558] ERROR weewx.reportengine:         
>>>>>> **** 
>>>>>>  ImportError: No module named Cheetah.FiltersJul 13 11:35:18 raspberrypi 
>>>>>> weewxd[558]: weewx[558] ERROR weewx.reportengine:         ****  
>>>>>> Generator 
>>>>>> ignoredJul 13 11:35:20 raspberrypi weewxd[558]: weewx[558] INFO 
>>>>>> weewx.imagegenerator: Generated 15 images for report SeasonsReport in 
>>>>>> 1.96 
>>>>>> secondsJul 13 11:35:20 raspberrypi weewxd[558]: weewx[558] INFO 
>>>>>> weewx.reportengine: Copied 0 files to /home/weewx/public_htmlHint: Some 
>>>>>> lines were ellipsized, use -l to show in full.*
>>>>>>  
>>>>>> Looking in /home/weewx/bin/weewx I can see the files (reportengine, 
>>>>>> cheetahgenerator). I will reload Cheetah3 and see what happens.
>>>>>>
>>>>>> Michael H Grossie
>>>>>> [email protected]
>>>>>>
>>>>>>
>>>>>> On Mon, Jul 13, 2020 at 9:16 AM Andrew Milner <[email protected]> 
>>>>>> wrote:
>>>>>>
>>>>>>> see documentation
>>>>>>> http://weewx.com/docs/usersguide.htm#Where_to_find_things
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> On Monday, 13 July 2020 17:15:31 UTC+3, Andrew Milner wrote:
>>>>>>>>
>>>>>>>> if you used setup.py the .sdb file will be in /home/weewx/archive 
>>>>>>>> and should contain all your simulator data.  It may be useful to edit 
>>>>>>>> weewx.conf and set debug=1 to get more detailed logging - remember to 
>>>>>>>> set 
>>>>>>>> it back to 0 when you have finished.
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> On Monday, 13 July 2020 16:58:38 UTC+3, Michael Grossie wrote:
>>>>>>>>>
>>>>>>>>> Andrew,
>>>>>>>>>
>>>>>>>>> Thanks for the response - That answered my question regarding the 
>>>>>>>>> Simulator Station. I now need to find out where the data it is 
>>>>>>>>> generating 
>>>>>>>>> is going. 
>>>>>>>>>  
>>>>>>>>>  
>>>>>>>>> Michael H Grossie
>>>>>>>>> [email protected]
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> On Mon, Jul 13, 2020 at 12:18 AM Andrew Milner <
>>>>>>>>> [email protected]> wrote:
>>>>>>>>>
>>>>>>>>>> setting station type to simulator effectively creates a station 
>>>>>>>>>> which pretends to create data and gives the data to weewx.  weewx 
>>>>>>>>>> then does 
>>>>>>>>>> everything it should do with the 'received' data including generate 
>>>>>>>>>> reports.  it will also store the dta in the database, so when you 
>>>>>>>>>> have 
>>>>>>>>>> finished using simulator you will need to clear out the simulation 
>>>>>>>>>> data 
>>>>>>>>>> from the database - usually just deleting the database file is 
>>>>>>>>>> sufficient.
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> On Monday, 13 July 2020 01:01:25 UTC+3, Michael Grossie wrote:
>>>>>>>>>>>
>>>>>>>>>>> Andre,
>>>>>>>>>>> Thanks for the response - in the [StdReport] section of the 
>>>>>>>>>>> weewx.conf, it shows, "where generated reports should go, relative 
>>>>>>>>>>> to 
>>>>>>>>>>> WEEWX_ROOT  HTML_ROOT= public_HTML"
>>>>>>>>>>>
>>>>>>>>>>> Since the station is set to Simulation, will there be any 
>>>>>>>>>>> reports generated?
>>>>>>>>>>>
>>>>>>>>>>> TIA
>>>>>>>>>>>  
>>>>>>>>>>>  
>>>>>>>>>>> Michael H Grossie
>>>>>>>>>>> [email protected]
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> On Sun, Jul 12, 2020 at 2:41 PM Andre <[email protected]> 
>>>>>>>>>>> wrote:
>>>>>>>>>>>
>>>>>>>>>>>> First, take a look to your weewx.conf
>>>>>>>>>>>> Section [StdReport]
>>>>>>>>>>>> There is HTML_ROOT = /path/name/path
>>>>>>>>>>>>
>>>>>>>>>>>> If you have only have one website you can point to your 
>>>>>>>>>>>> default Apache2 path or you can edit your 
>>>>>>>>>>>> /etc/apache2/sites-available/000-default.conf
>>>>>>>>>>>> After editing restart Apache2 with sudo /etc/init.d/apache2 
>>>>>>>>>>>> restart
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> Am Sonntag, 12. Juli 2020 20:59:03 UTC+2 schrieb Michael 
>>>>>>>>>>>> Grossie:
>>>>>>>>>>>>>
>>>>>>>>>>>>> Answered one of my questions - I changed the Weather Station 
>>>>>>>>>>>>> to Simulator and the weewx/public_HTML folder was created and 
>>>>>>>>>>>>> populated.
>>>>>>>>>>>>> However running http://localhost/weewx 
>>>>>>>>>>>>> <http://www.google.com/url?q=http%3A%2F%2Flocalhost%2Fweewx&sa=D&sntz=1&usg=AFQjCNHBxcaES0Yn82J1BxYpDZCPLsAvGg>
>>>>>>>>>>>>>   
>>>>>>>>>>>>> yields the Page Not Found error.
>>>>>>>>>>>>>  
>>>>>>>>>>>>>  
>>>>>>>>>>>>> Michael H Grossie
>>>>>>>>>>>>> [email protected]
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> On Sun, Jul 12, 2020 at 12:18 PM Michael Grossie <
>>>>>>>>>>>>> [email protected]> wrote:
>>>>>>>>>>>>>
>>>>>>>>>>>>>> This is a very old thread - but it relates to my question - 
>>>>>>>>>>>>>> with the exception of Ubuntu
>>>>>>>>>>>>>> Raspberry Pi 2 B
>>>>>>>>>>>>>> Raspbian Stretch
>>>>>>>>>>>>>> Station: Argent WS1
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> I have got Apache2 installed, followed the setup and 
>>>>>>>>>>>>>> completed the Apache configuration snippet. I have checked and 
>>>>>>>>>>>>>> the various 
>>>>>>>>>>>>>> files and directories are in place, however I do not find the 
>>>>>>>>>>>>>> /home/weewx/public_html file.
>>>>>>>>>>>>>> Since I am not connected to active weather instruments at 
>>>>>>>>>>>>>> this time, could it be that this file will not be created until 
>>>>>>>>>>>>>> the weewx 
>>>>>>>>>>>>>> program receives data - 
>>>>>>>>>>>>>> the http://localhost/weewx  gives me a 404 page not found 
>>>>>>>>>>>>>> error.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> TIA
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> On Friday, September 16, 2016 at 2:28:31 PM UTC-5 
>>>>>>>>>>>>>> [email protected] wrote:
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> How did you guys configure Apache?
>>>>>>>>>>>>>>> Apache2 for instance is able to serve multiple/different 
>>>>>>>>>>>>>>> sites from different directories based on the requesting url.
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> I created a virtualhost in Apache based on the url, which 
>>>>>>>>>>>>>>> tells Apache to serve the weewx pages from the directory where 
>>>>>>>>>>>>>>> they are 
>>>>>>>>>>>>>>> located.
>>>>>>>>>>>>>>> You could read this:
>>>>>>>>>>>>>>> https://help.ubuntu.com/lts/serverguide/httpd.html
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> i placed 
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> DocumentRoot /var/www/weewx
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> In the configuration file for the site, and this works
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> -- 
>>>>>>>>>>>>>> You received this message because you are subscribed to a 
>>>>>>>>>>>>>> topic in the Google Groups "weewx-user" group.
>>>>>>>>>>>>>> To unsubscribe from this topic, visit 
>>>>>>>>>>>>>> https://groups.google.com/d/topic/weewx-user/kzXjvLjWI-k/unsubscribe
>>>>>>>>>>>>>> .
>>>>>>>>>>>>>> To unsubscribe from this group and all its topics, send an 
>>>>>>>>>>>>>> email to [email protected].
>>>>>>>>>>>>>> To view this discussion on the web visit 
>>>>>>>>>>>>>> https://groups.google.com/d/msgid/weewx-user/7ff66258-27e1-4418-83c2-11ed49e5c77an%40googlegroups.com
>>>>>>>>>>>>>>  
>>>>>>>>>>>>>> <https://groups.google.com/d/msgid/weewx-user/7ff66258-27e1-4418-83c2-11ed49e5c77an%40googlegroups.com?utm_medium=email&utm_source=footer>
>>>>>>>>>>>>>> .
>>>>>>>>>>>>>>
>>>>>>>>>>>>> -- 
>>>>>>>>>>>> You received this message because you are subscribed to a topic 
>>>>>>>>>>>> in the Google Groups "weewx-user" group.
>>>>>>>>>>>> To unsubscribe from this topic, visit 
>>>>>>>>>>>> https://groups.google.com/d/topic/weewx-user/kzXjvLjWI-k/unsubscribe
>>>>>>>>>>>> .
>>>>>>>>>>>> To unsubscribe from this group and all its topics, send an 
>>>>>>>>>>>> email to [email protected].
>>>>>>>>>>>> To view this discussion on the web visit 
>>>>>>>>>>>> https://groups.google.com/d/msgid/weewx-user/0a0eeb25-e5b4-4767-a254-92168ff6ed72o%40googlegroups.com
>>>>>>>>>>>>  
>>>>>>>>>>>> <https://groups.google.com/d/msgid/weewx-user/0a0eeb25-e5b4-4767-a254-92168ff6ed72o%40googlegroups.com?utm_medium=email&utm_source=footer>
>>>>>>>>>>>> .
>>>>>>>>>>>>
>>>>>>>>>>> -- 
>>>>>>>>>> You received this message because you are subscribed to a topic 
>>>>>>>>>> in the Google Groups "weewx-user" group.
>>>>>>>>>> To unsubscribe from this topic, visit 
>>>>>>>>>> https://groups.google.com/d/topic/weewx-user/kzXjvLjWI-k/unsubscribe
>>>>>>>>>> .
>>>>>>>>>> To unsubscribe from this group and all its topics, send an email 
>>>>>>>>>> to [email protected].
>>>>>>>>>> To view this discussion on the web visit 
>>>>>>>>>> https://groups.google.com/d/msgid/weewx-user/1b232c4f-e536-4ab5-9952-ea862c0576cfo%40googlegroups.com
>>>>>>>>>>  
>>>>>>>>>> <https://groups.google.com/d/msgid/weewx-user/1b232c4f-e536-4ab5-9952-ea862c0576cfo%40googlegroups.com?utm_medium=email&utm_source=footer>
>>>>>>>>>> .
>>>>>>>>>>
>>>>>>>>> -- 
>>>>>>> You received this message because you are subscribed to a topic in 
>>>>>>> the Google Groups "weewx-user" group.
>>>>>>> To unsubscribe from this topic, visit 
>>>>>>> https://groups.google.com/d/topic/weewx-user/kzXjvLjWI-k/unsubscribe
>>>>>>> .
>>>>>>> To unsubscribe from this group and all its topics, send an email to 
>>>>>>> [email protected].
>>>>>>> To view this discussion on the web visit 
>>>>>>> https://groups.google.com/d/msgid/weewx-user/cff77065-309c-454d-aab6-2096c20784bbo%40googlegroups.com
>>>>>>>  
>>>>>>> <https://groups.google.com/d/msgid/weewx-user/cff77065-309c-454d-aab6-2096c20784bbo%40googlegroups.com?utm_medium=email&utm_source=footer>
>>>>>>> .
>>>>>>>
>>>>>> -- 
>> You received this message because you are subscribed to a topic in the 
>> Google Groups "weewx-user" group.
>> To unsubscribe from this topic, visit 
>> https://groups.google.com/d/topic/weewx-user/kzXjvLjWI-k/unsubscribe.
>> To unsubscribe from this group and all its topics, send an email to 
>> [email protected].
>>
> To view this discussion on the web visit 
>> https://groups.google.com/d/msgid/weewx-user/7dc2b5d4-aab7-458e-8539-8be5f9d84210n%40googlegroups.com
>>  
>> <https://groups.google.com/d/msgid/weewx-user/7dc2b5d4-aab7-458e-8539-8be5f9d84210n%40googlegroups.com?utm_medium=email&utm_source=footer>
>> .
>>
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to [email protected].
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/1be96813-f04c-468a-9e48-e893096d1639n%40googlegroups.com.

Reply via email to