Hi, Gary!
Thanks for the hints. In deed, there is a value for beaufort in the loop:
LOOP: 2020-07-23 14:16:36 CEST (1595506596) altimeter:
30.065488730750573, appTemp: 69.20122805363343, barometer: 30.014,
beaufort: 1, cloudbase: 3824.7354273385445, dateTime: 1595506596, dewpoint:
52.73310752508154, heatindex: 69.1, humidex: 72.72248011924633, inDewpoint:
54.980122811806766, inHumidity: 64.0, inTemp: 67.6, maxSolarRad:
820.4582989978796, outHumidity: 56.0, outTemp: 69.1, pressure: 29.949,
radiation: 604.7, rain: None, rainEvent: 0.0, rainRate: 0.0,
txBatteryStatus: 0.0, usUnits: 1, UV: 5.0, windchill: 69.1, windDir: 240.0,
windGust: 3.36, windSpeed: 1.34
I did not wait for the REC: record.
So then I should have a look into the skin/skin config. However, I use the
seasons skin with some translations of the descriptions into German and
just added the value, as Tom posted above. I put it into current.inc here
<div class="widget_contents">
<table>
<tbody>
<tr>
<td class="label">$obs.label.outTemp</td>
<td class="data">$current.outTemp</td>
</tr>
<tr>
<td class="label">$obs.label.heatindex</td>
<td class="data">$current.heatindex</td>
</tr>
<tr>
<td class="label">$obs.label.windchill</td>
<td class="data">$current.windchill</td>
</tr>
<tr>
<td class="label">$obs.label.dewpoint</td>
<td class="data">$current.dewpoint</td>
</tr>
<tr>
<td class="label">$obs.label.outHumidity</td>
<td class="data">$current.outHumidity</td>
</tr>
<tr>
<td class="label">$obs.label.barometer</td>
<td class="data">$current.barometer (Trend:
$trend.barometer.formatted)</td>
</tr>
<tr>
<td class="label">$obs.label.wind</td>
<td class="data">$current.windSpeed ($current.beaufort bft)
$current.windDir.ordinal_compass
($current.windDir)<br/>$word_current_beaufort<br />Böen
$current_gust_beaufort</td>
</tr>
gjr80 schrieb am Mittwoch, 22. Juli 2020 um 04:54:16 UTC+2:
> Hi,
>
> If you have beaufort = prefer_hardware under [StdWXCalculate] then you
> should be seeing field beaufort in loop packets and archive records
> provided you have field windSpeed in the same packet/record. I would go
> back to basics as far as you can and run WeeeWX directly
> <http://weewx.com/docs/usersguide.htm#Running_directly> for at least an
> archive interval (you want to see at least one archive record) and observe
> the loop packets (lines starting with LOOP:) and archive records (lines
> starting with REC:) on the console. Do they have a field windSpeed and
> what is its value, do they have a field beaufort and what is its value?
> If you have windSpeed and no beaufort or have windSpeed and have an
> incorrect beaufort value then something is wrong and we need to dig
> deeper. If the loop packets/archive records are correct then the issue is
> downstream in the skin/skin config.
>
> Gary
>
> On Tuesday, 21 July 2020 at 20:55:37 UTC+10 Vetti52 wrote:
>
>> Hi, Tom!
>>
>> As there was almost no wind last week, I just tried to activate
>> $current.beaufort. I decided to show both values, such as $current_beaufort
>> ($current.beaufort). However, the new value always shows (0), while the
>> other one looks ok to me. Do I have to drive another screw somewhere in
>> Weewx. The only place, I know, is the entry in [StdWXCalculate], which is
>> set to "prefer_hardware" as by default.
>> It is not that bad, as the solution from @WindnFog
>> <https://groups.google.com/d/msg/weewx-user/b7TqpYD9sxY/60NGeJEFDAAJ>works
>> as well. But, at least, the new solution should work too.
>>
>> Am Mittwoch, 8. Juli 2020 18:25:06 UTC+2 schrieb Tom Keffer:
>>
>>> Beaufort is treated as a separate observation type, not an alternative
>>> unit. So, you should be able to use it like any other type. For example,
>>>
>>> <p>The current wind speed is $current.windSpeed, which is beaufort
>>> $current.beaufort.</p>
>>>
>>> If you want to plot it, you would need to put 'beaufort' in your
>>> database schema.
>>>
>>> -tk
>>>
>>>
>>>
>>> On Wed, Jul 8, 2020 at 6:42 AM Vetti52 <[email protected]> wrote:
>>>
>> Hi you Weewx experts!
>>>>
>>>> first I would like to say, that my station ( a WS2900 clone) is not
>>>> that sophisticated, especially concerning wind speed and direction. There
>>>> are many tall trees around, being closer than their 10fold height, so that
>>>> the wind is often much smoother and more disturbed than on top of the
>>>> trees. However, I still would like to compare the data to the data
>>>> provided
>>>> by local weather forecasters. Commonly the wind is announced in the
>>>> literally equation of the predicted Beaufort value. So, they talk of
>>>> "fresh
>>>> breeze", when wind with 5 bft is expected. Therefore I wanted to display
>>>> the wind data in bft and its literal equivalent also. In Weewx 3 I adopted
>>>> the solution found here:
>>>> https://groups.google.com/d/topic/weewx-user/b7TqpYD9sxY/discussion
>>>> which works fine so far.
>>>> After upgrading to Weewx 4 I found a new entry in
>>>>
>>>> [StdWXCalculate]
>>>> [[Calculations]]
>>>> beaufort = prefer_hardware
>>>>
>>>> which raised the question, if I could replace the previous solution by
>>>> that introduced in version 4.
>>>> I expected, that there would be an option in the [[[Units]]] section to
>>>> chose 'beaufort' instead of 'knot'. But this is not offered in the options
>>>> there. Anyway, this would not be the solution, because I want to see the
>>>> wind speed as it is actually shown, and *in addition *in terms of
>>>> Beaufort. This should also be shown in an extra graph over time.
>>>>
>>>> Does anyone have a clue, how to manage this?
>>>>
>>>> --
>>>> You received this message because you are subscribed to the Google
>>>> Groups "weewx-user" group.
>>>>
>>> To unsubscribe from this group and stop receiving emails from it, send
>>>> an email to [email protected].
>>>
>>>
>>>> To view this discussion on the web visit
>>>> https://groups.google.com/d/msgid/weewx-user/e766b133-65d4-4821-917e-49a31936a43do%40googlegroups.com
>>>>
>>>> <https://groups.google.com/d/msgid/weewx-user/e766b133-65d4-4821-917e-49a31936a43do%40googlegroups.com?utm_medium=email&utm_source=footer>
>>>> .
>>>>
>>>
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/weewx-user/dc5dec8e-aa82-4ed5-8351-32eb34e95b2bn%40googlegroups.com.
