Using verbosity=1, displaying most info
wee_debug output will be sent to stdout(console)
Using configuration file /home/weewx/weewx.conf
Using database binding 'wx_binding', which is bound to database
'archive_sqlite'
System info
Platform: Linux-5.4.51+-armv6l-with-debian-10.4
Python Version: 3.7.3
Load Information
1 minute load average: 0.46
5 minute load average: 0.46
15 minute load average: 0.45
General Weewx info
Weewx version 4.1.1 detected.
Station info
Station type: Vantage
Driver: weewx.drivers.vantage
Driver info
[Vantage]
# This section is for the Davis Vantage series of weather stations.
# Connection type: serial or ethernet
# serial (the classic VantagePro)
# ethernet (the WeatherLinkIP or Serial-Ethernet bridge)
type = serial
# If the connection type is serial, a port must be specified:
# Debian, Ubuntu, Redhat, Fedora, and SuSE:
# /dev/ttyUSB0 is a common USB port name
# /dev/ttyS0 is a common serial port name
# BSD:
# /dev/cuaU0 is a common serial port name
port = /dev/ttyUSB0
# If the connection type is ethernet, an IP Address/hostname is
required:
host = 1.2.3.4
######################################################
# The rest of this section rarely needs any attention.
# You can safely leave it "as is."
######################################################
# Serial baud rate (usually 19200)
baudrate = 19200
# TCP port (when using the WeatherLinkIP)
tcp_port = 22222
# TCP send delay (when using the WeatherLinkIP):
tcp_send_delay = 0.5
# The type of LOOP packet to request: 1 = LOOP1; 2 = LOOP2; 3 = both
loop_request = 1
# The id of your ISS station (usually 1). If you use a wind meter
connected
# to a anemometer transmitter kit, use its id
iss_id = 1
# How long to wait for a response from the station before giving up (in
# seconds; must be greater than 2)
timeout = 4
# How long to wait before trying again (in seconds)
wait_before_retry = 1.2
# How many times to try before giving up:
max_tries = 4
# Vantage model Type: 1 = Vantage Pro; 2 = Vantage Pro2
model_type = 2
# The driver to use:
driver = weewx.drivers.vantage
Currently installed extensions
No extensions installed
Archive info
Database name: weewx.sdb
Table name: archive
Version 2.0
Unit system: 16 (METRIC)
First good timestamp: 2020-08-03 14:10:00 CEST (1596456600)
Last good timestamp: 2020-08-12 16:25:00 CEST (1597242300)
Number of records: 2613
weewx (weewx.conf) is set to use an archive interval of 300 seconds.
The station hardware was not interrogated in determining archive interval.
Databases configured in weewx.conf
Database name: weewx.sdb
Database driver: weedb.sqlite
Database name: weewx
Database driver: weedb.mysql
Database host: localhost
Parsed and obfuscated weewx.conf
# WEEWX CONFIGURATION FILE
#
# Copyright (c) 2009-2019 Tom Keffer <[email protected]>
# See the file LICENSE.txt for your rights.
##############################################################################
# This section is for general configuration information.
# Set to 1 for extra debug info, otherwise comment it out or set to zero
debug = 1
# Root directory of the weewx data file hierarchy for this station
WEEWX_ROOT = /home/weewx
# Whether to log successful operations
log_success = True
# Whether to log unsuccessful operations
log_failure = True
# How long to wait before timing out a socket (FTP, HTTP) connection
socket_timeout = 20
# Do not modify this. It is used when installing and updating weewx.
version = 4.1.1
##############################################################################
# This section is for information about the station.
[Station]
# Description of the station location
location = "Pineto, Teramo"
# Latitude in decimal degrees. Negative for southern hemisphere
latitude = 42.634585
# Longitude in decimal degrees. Negative for western hemisphere.
longitude = 14.040554
# Altitude of the station, with unit it is in. This is downloaded from
# from the station if the hardware supports it.
altitude = 40, meter # Choose 'foot' or 'meter' for unit
# Set to type of station hardware. There must be a corresponding stanza
# in this file with a 'driver' parameter indicating the driver to be
used.
station_type = Vantage
# If you have a website, you may specify an URL
station_url = XXX obfuscated by wee_debug XXX
# The start of the rain year (1=January; 10=October, etc.). This is
# downloaded from the station if the hardware supports it.
rain_year_start = 1
# Start of week (0=Monday, 6=Sunday)
week_start = 0
##############################################################################
[Vantage]
# This section is for the Davis Vantage series of weather stations.
# Connection type: serial or ethernet
# serial (the classic VantagePro)
# ethernet (the WeatherLinkIP or Serial-Ethernet bridge)
type = serial
# If the connection type is serial, a port must be specified:
# Debian, Ubuntu, Redhat, Fedora, and SuSE:
# /dev/ttyUSB0 is a common USB port name
# /dev/ttyS0 is a common serial port name
# BSD:
# /dev/cuaU0 is a common serial port name
port = /dev/ttyUSB0
# If the connection type is ethernet, an IP Address/hostname is
required:
host = 1.2.3.4
######################################################
# The rest of this section rarely needs any attention.
# You can safely leave it "as is."
######################################################
# Serial baud rate (usually 19200)
baudrate = 19200
# TCP port (when using the WeatherLinkIP)
tcp_port = 22222
# TCP send delay (when using the WeatherLinkIP):
tcp_send_delay = 0.5
# The type of LOOP packet to request: 1 = LOOP1; 2 = LOOP2; 3 = both
loop_request = 1
# The id of your ISS station (usually 1). If you use a wind meter
connected
# to a anemometer transmitter kit, use its id
iss_id = 1
# How long to wait for a response from the station before giving up (in
# seconds; must be greater than 2)
timeout = 4
# How long to wait before trying again (in seconds)
wait_before_retry = 1.2
# How many times to try before giving up:
max_tries = 4
# Vantage model Type: 1 = Vantage Pro; 2 = Vantage Pro2
model_type = 2
# The driver to use:
driver = weewx.drivers.vantage
##############################################################################
# This section is for uploading data to Internet sites
[StdRESTful]
[[StationRegistry]]
# To register this weather station with weewx, set this to true
register_this_station = true
[[AWEKAS]]
# This section is for configuring posts to AWEKAS.
# If you wish to do this, set the option 'enable' to true,
# and specify a username and password.
# To guard against parsing errors, put the password in quotes.
enable = false
username = XXX obfuscated by wee_debug XXX
password = XXX obfuscated by wee_debug XXX
[[CWOP]]
# This section is for configuring posts to CWOP.
# If you wish to do this, set the option 'enable' to true,
# and specify the station ID (e.g., CW1234).
enable = false
station = XXX obfuscated by wee_debug XXX
# If this is an APRS (radio amateur) station, uncomment
# the following and replace with a passcode (e.g., 12345).
#passcode = replace_me (APRS stations only)
[[PWSweather]]
# This section is for configuring posts to PWSweather.com.
# If you wish to do this, set the option 'enable' to true,
# and specify a station and password.
# To guard against parsing errors, put the password in quotes.
enable = false
station = XXX obfuscated by wee_debug XXX
password = XXX obfuscated by wee_debug XXX
[[WOW]]
# This section is for configuring posts to WOW.
# If you wish to do this, set the option 'enable' to true,
# and specify a station and password.
# To guard against parsing errors, put the password in quotes.
enable = false
station = XXX obfuscated by wee_debug XXX
password = XXX obfuscated by wee_debug XXX
[[Wunderground]]
# This section is for configuring posts to the Weather Underground.
# If you wish to do this, set the option 'enable' to true,
# and specify a station (e.g., 'KORHOODR3') and password.
# To guard against parsing errors, put the password in quotes.
enable = false
station = XXX obfuscated by wee_debug XXX
password = XXX obfuscated by wee_debug XXX
# If you plan on using wunderfixer, set the following
# to your API key:
api_key = XXX obfuscated by wee_debug XXX
# Set the following to True to have weewx use the WU "Rapidfire"
# protocol. Not all hardware can support it. See the User's Guide.
rapidfire = False
##############################################################################
# This section specifies what reports, using which skins, to generate.
[StdReport]
# Where the skins reside, relative to WEEWX_ROOT
SKIN_ROOT = skins
# Where the generated reports should go, relative to WEEWX_ROOT
HTML_ROOT = public_html
# The database binding indicates which data should be used in reports.
data_binding = wx_binding
# Whether to log a successful operation
log_success = True
# Whether to log an unsuccessful operation
log_failure = False
# Each of the following subsections defines a report that will be run.
# See the customizing guide to change the units, plot types and line
# colors, modify the fonts, display additional sensor data, and other
# customizations. Many of those changes can be made here by overriding
# parameters, or by modifying templates within the skin itself.
[[SeasonsReport]]
# The SeasonsReport uses the 'Seasons' skin, which contains the
# images, templates and plots for the report.
skin = Seasons
enable = false
[[SmartphoneReport]]
# The SmartphoneReport uses the 'Smartphone' skin, and the images
and
# files are placed in a dedicated subdirectory.
skin = Smartphone
enable = false
HTML_ROOT = public_html/smartphone
[[MobileReport]]
# The MobileReport uses the 'Mobile' skin, and the images and files
# are placed in a dedicated subdirectory.
skin = Mobile
enable = false
HTML_ROOT = public_html/mobile
[[StandardReport]]
# This is the old "Standard" skin. By default, it is not enabled.
skin = Standard
enable = false
[[FTP]]
# FTP'ing the results to a webserver is treated as just another
report,
# albeit one with an unusual report generator!
skin = Ftp
# If you wish to use FTP, set "enable" to "true", then
# fill out the next four lines.
# Use quotes around passwords to guard against parsing errors.
enable = false
user = XXX obfuscated by wee_debug XXX
password = XXX obfuscated by wee_debug XXX
server = replace_me # The ftp server name, e.g, www.myserver.org
path = replace_me # The destination directory, e.g., /weather
# Set to True for an FTP over TLS (FTPS) connection. Not all servers
# support this.
secure_ftp = False
# To upload files from something other than what HTML_ROOT is set
# to above, specify a different HTML_ROOT here.
#HTML_ROOT = public_html
# Most FTP servers use port 21
port = 21
# Set to 1 to use passive mode, zero for active mode
passive = 1
[[RSYNC]]
# rsync'ing to a webserver is treated as just another report
skin = Rsync
# If you wish to use rsync, you must configure passwordless ssh
using
# public/private key authentication from the user account that weewx
# runs to the user account on the remote machine where the files
# will be copied.
#
# If you wish to use rsync, set "enable" to "true", then
# fill out server, user, and path.
# The server should appear in your .ssh/config file.
# The user is the username used in the identity file.
# The path is the destination directory, such as
/var/www/html/weather.
# Be sure that the user has write permissions on the destination!
enable = false
server = replace_me
user = XXX obfuscated by wee_debug XXX
path = replace_me
# To upload files from something other than what HTML_ROOT is set
# to above, specify a different HTML_ROOT here.
#HTML_ROOT = public_html
# Rsync can be configured to remove files from the remote server if
# they don't exist under HTML_ROOT locally. USE WITH CAUTION: if you
# make a mistake in the remote path, you could could unintentionally
# cause unrelated files to be deleted. Set to 1 to enable remote
file
# deletion, zero to allow files to accumulate remotely.
delete = 0
####
# Various options for customizing your reports.
[[Defaults]]
[[[Units]]]
# The following section sets what unit to use for each unit
group.
# NB: The unit is always in the singular. I.e., 'mile_per_hour',
# NOT 'miles_per_hour'
[[[[Groups]]]]
group_altitude = meter # Options are 'foot' or 'meter'
group_degree_day = degree_C_day # Options are
'degree_F_day' or 'degree_C_day'
group_distance = km # Options are 'mile' or 'km'
group_pressure = mbar # Options are 'inHg', 'mmHg',
'mbar', or 'hPa'
group_rain = mm # Options are 'inch', 'cm', or 'mm'
group_rainrate = mm_per_hour # Options are
'inch_per_hour', 'cm_per_hour', or 'mm_per_hour'
group_speed = meter_per_second # Options are
'mile_per_hour', 'km_per_hour', 'knot', or 'meter_per_second'
group_speed2 = meter_per_second2 # Options are
'mile_per_hour2', 'km_per_hour2', 'knot2', or 'meter_per_second2'
group_temperature = degree_C # Options are 'degree_F' or
'degree_C'
# The following section sets the formatting for each type of
unit.
[[[[StringFormats]]]]
centibar = %.0f
cm = %.2f
cm_per_hour = %.2f
degree_C = %.1f
degree_F = %.1f
degree_compass = %.0f
foot = %.0f
hPa = %.1f
hour = %.1f
inHg = %.3f
inch = %.2f
inch_per_hour = %.2f
km = %.1f
km_per_hour = %.0f
km_per_hour2 = %.1f
knot = %.0f
knot2 = %.1f
mbar = %.1f
meter = %.0f
meter_per_second = %.1f
meter_per_second2 = %.1f
mile = %.1f
mile_per_hour = %.0f
mile_per_hour2 = %.1f
mm = %.1f
mmHg = %.1f
mm_per_hour = %.1f
percent = %.0f
second = %.0f
uv_index = %.1f
volt = %.1f
watt_per_meter_squared = %.0f
NONE = " N/A"
# The following section overrides the label used for each type
of unit
[[[[Labels]]]]
meter = " meter", " meters" # You may prefer "metre".
day = " day", " days"
hour = " hour", " hours"
minute = " minute", " minutes"
second = " second", " seconds"
NONE = ""
# The following section sets the format for each time scale.
# The values below will work in every locale, but they may not
look
# particularly attractive.
[[[[TimeFormats]]]]
hour = %H:%M
day = %X
week = %X (%A)
month = %x %X
year = %x %X
rainyear = %x %X
current = %x %X
ephem_day = %X
ephem_year = %x %X
[[[[Ordinates]]]]
# Ordinal directions. The last one is for no wind direction
directions = N, NNE, NE, ENE, E, ESE, SE, SSE, S, SSW, SW,
WSW, W, WNW, NW, NNW, N/A
# The following section sets the base temperatures used for the
# calculation of heating, cooling, and growing degree-days.
[[[[DegreeDays]]]]
# Base temperature for heating days, with unit:
heating_base = 65, degree_F
# Base temperature for cooling days, with unit:
cooling_base = 65, degree_F
# Base temperature for growing days, with unit:
growing_base = 50, degree_F
# A trend takes a difference across a time period. The following
# section sets the time period, and how big an error is allowed
to
# still be counted as the start or end of a period.
[[[[Trend]]]]
time_delta = 10800 # 3 hours
time_grace = 300 # 5 minutes
# The labels to be used for each observation type
[[[Labels]]]
# Set to hemisphere abbreviations suitable for your location:
hemispheres = N, S, E, W
# Formats to be used for latitude whole degrees, longitude whole
# degrees, and minutes:
latlon_formats = %02d, %03d, %05.2f
# Generic labels, keyed by an observation type.
[[[[Generic]]]]
barometer = Barometer
dewpoint = Dew Point
ET = ET
heatindex = Heat Index
inHumidity = Inside Humidity
inTemp = Inside Temperature
outHumidity = Humidity
outTemp = Outside Temperature
radiation = Radiation
rain = Rain
rainRate = Rain Rate
UV = UV Index
windDir = Wind Direction
windGust = Gust Speed
windGustDir = Gust Direction
windSpeed = Wind Speed
windchill = Wind Chill
windgustvec = Gust Vector
windvec = Wind Vector
extraTemp1 = Temperature1
extraTemp2 = Temperature2
extraTemp3 = Temperature3
# Sensor status indicators
rxCheckPercent = Signal Quality
txBatteryStatus = Transmitter Battery
windBatteryStatus = Wind Battery
rainBatteryStatus = Rain Battery
outTempBatteryStatus = Outside Temperature Battery
inTempBatteryStatus = Inside Temperature Battery
consBatteryVoltage = Console Battery
heatingVoltage = Heating Battery
supplyVoltage = Supply Voltage
referenceVoltage = Reference Voltage
[[[Almanac]]]
# The labels to be used for the phases of the moon:
moon_phases = New, Waxing crescent, First quarter, Waxing
gibbous, Full, Waning gibbous, Last quarter, Waning crescent
#
############################################################################
[[Weather34Report]]
skin = Weather34
HTML_ROOT = /var/www/html/weewx/weather34/
[[[Units]]]
[[[[Groups]]]]
group_altitude = meter
group_degree_day = degree_C_day
group_pressure = hPa
group_rain = mm
group_rainrate = mm_per_hour
group_speed = meter_per_second
group_speed2 = meter_per_second2
group_temperature = degree_C
#
############################################################################
[[w34Highcharts]]
HTML_ROOT = /var/www/html/weewx/weather34/w34highcharts
skin = w34Highcharts
enable = true
[[[CheetahGenerator]]]
[[[[ToDate]]]]
[[[[[YearJSON]]]]]
stale_age = 600
[[[Units]]]
[[[[StringFormats]]]]
centibar = %.0f
cm = %.2f
cm_per_hour = %.2f
degree_C = %.1f
degree_F = %.1f
degree_compass = %.0f
foot = %.0f
hPa = %.1f
inHg = %.3f
inch = %.2f
inch_per_hour = %.2f
km_per_hour = %.0f
km_per_hour2 = %.1f
knot = %.0f
knot2 = %.1f
mbar = %.1f
meter = %.0f
meter_per_second = %.1f
meter_per_second2 = %.1f
mile_per_hour = %.0f
mile_per_hour2 = %.1f
mm = %.1f
mmHg = %.1f
mm_per_hour = %.1f
percent = %.0f
uv_index = %.1f
volt = %.1f
watt_per_meter_squared = %.0f
NONE = N/A
[[[[Labels]]]]
centibar = cb
cm = cm
cm_per_hour = cm/hr
degree_C = ° C
degree_F = ° F
degree_compass = °
foot = feet
hPa = hPa
inHg = inHg
inch = in
inch_per_hour = in/hr
km_per_hour = km/hr
km_per_hour2 = km/hr
knot = knots
knot2 = knots
mbar = mbar
meter = meters
meter_per_second = m/s
meter_per_second2 = m/s
mile_per_hour = mph
mile_per_hour2 = mph
mm = mm
mmHg = mmHg
mm_per_hour = mm/hr
percent = %
uv_index = Index
volt = V
watt_per_meter_squared = W/m²
NONE = ""
[[[Extras]]]
[[[[MinRange]]]]
outTemp = 10, degree_C
windchill = 10, degree_C
barometer = 20, hPa
windSpeed = 10
rain = 5, mm
radiation = 500
UV = 16
[[[[WindRose]]]]
title = Wind Rose
source = windSpeed
period = 3600, 86400, 604800, month, year
aggregate_type = ""
aggregate_interval = ""
petals = 16
petal_colors = aqua, 0x0099FF, 0x0033FF, 0x009900,
0x00CC00, 0x33FF33, 0xCCFF00
speedfactor = 0.0, 0.1, 0.2, 0.3, 0.5, 0.7, 1.0
legend_title = True
band_percent = True
bullseye_percent = True
precision = 1
bullseye_size = 20
bullseye_color = 0xFFFACD
calm_limit = 0.1
##############################################################################
# This service acts as a filter, converting the unit system coming from
# the hardware to a unit system in the database.
[StdConvert]
# The target_unit affects only the unit system in the database. Once
# chosen it cannot be changed without converting the entire database.
# Modification of target_unit after starting weewx will result in
# corrupt data - the database will contain a mix of US and METRIC data.
#
# The value of target_unit does not affect the unit system for
# reporting - reports can display US, Metric, or any combination of
units.
#
# In most cases, target_unit should be left as the default: US
#
# In particular, those migrating from a standard wview installation
# should use US since that is what the wview database contains.
# DO NOT MODIFY THIS VALUE UNLESS YOU KNOW WHAT YOU ARE DOING!
target_unit = METRIC # Options are 'US', 'METRICWX', or 'METRIC'
##############################################################################
# This section can adjust data using calibration expressions.
[StdCalibrate]
[[Corrections]]
# For each type, an arbitrary calibration expression can be given.
# It should be in the units defined in the StdConvert section.
# Example:
foo = foo + 0.2
##############################################################################
# This section is for quality control checks. If units are not specified,
# values must be in the units defined in the StdConvert section.
[StdQC]
[[MinMax]]
barometer = 26, 32.5, inHg
pressure = 24, 34.5, inHg
outTemp = -40, 120, degree_F
inTemp = 10, 120, degree_F
outHumidity = 0, 100
inHumidity = 0, 100
windSpeed = 0, 120, mile_per_hour
rain = 0, 10, inch
##############################################################################
# This section controls the origin of derived values.
[StdWXCalculate]
[[Calculations]]
# How to calculate derived quantities. Possible values are:
# hardware - use the value provided by hardware
# software - use the value calculated by weewx
# prefer_hardware - use value provide by hardware if available,
# otherwise use value calculated by weewx
pressure = prefer_hardware
altimeter = prefer_hardware
appTemp = prefer_hardware
barometer = prefer_hardware
beaufort = prefer_hardware
cloudbase = prefer_hardware
dewpoint = prefer_hardware
ET = prefer_hardware
heatindex = prefer_hardware
humidex = prefer_hardware
inDewpoint = prefer_hardware
maxSolarRad = prefer_hardware
rainRate = prefer_hardware
windchill = prefer_hardware
windrun = prefer_hardware
##############################################################################
# For hardware that supports it, this section controls how often the
# onboard clock gets updated.
[StdTimeSynch]
# How often to check the weather station clock for drift (in seconds)
clock_check = 14400
# How much it can drift before we will correct it (in seconds)
max_drift = 5
##############################################################################
# This section is for configuring the archive service.
[StdArchive]
# If the station hardware supports data logging then the archive
interval
# will be downloaded from the station. Otherwise, specify it (in
seconds).
archive_interval = 300
# If possible, new archive records are downloaded from the station
# hardware. If the hardware does not support this, then new archive
# records will be generated in software.
# Set the following to "software" to force software record generation.
record_generation = hardware
# Whether to include LOOP data in hi/low statistics
loop_hilo = True
# The data binding used to save archive records
data_binding = wx_binding
##############################################################################
# This section binds a data store to a database.
[DataBindings]
[[wx_binding]]
# The database must match one of the sections in [Databases].
# This is likely to be the only option you would want to change.
database = archive_sqlite
# The name of the table within the database
table_name = archive
# The manager handles aggregation of data for historical summaries
manager = weewx.manager.DaySummaryManager
# The schema defines the structure of the database.
# It is *only* used when the database is created.
schema = schemas.wview_extended.schema
##############################################################################
# This section defines various databases.
[Databases]
# A SQLite database is simply a single file
[[archive_sqlite]]
database_name = weewx.sdb
database_type = SQLite
# MySQL
[[archive_mysql]]
database_name = weewx
database_type = MySQL
##############################################################################
# This section defines defaults for the different types of databases.
[DatabaseTypes]
# Defaults for SQLite databases
[[SQLite]]
driver = weedb.sqlite
# Directory in which the database files are located
SQLITE_ROOT = /home/weewx/archive
# Defaults for MySQL databases
[[MySQL]]
driver = weedb.mysql
# The host where the database is located
host = localhost
# The user name for logging in to the host
user = XXX obfuscated by wee_debug XXX
# The password for the user name (quotes guard against parsing
errors)
password = XXX obfuscated by wee_debug XXX
##############################################################################
# This section configures the internal weewx engine.
[Engine]
[[Services]]
# This section specifies the services that should be run. They are
# grouped by type, and the order of services within each group
# determines the order in which the services will be run.
prep_services = weewx.engine.StdTimeSynch
data_services = ,
process_services = weewx.engine.StdConvert,
weewx.engine.StdCalibrate, weewx.engine.StdQC,
weewx.wxservices.StdWXCalculate, user.weather34.Weather34RealTime
archive_services = weewx.engine.StdArchive
restful_services = weewx.restx.StdStationRegistry,
weewx.restx.StdWunderground, weewx.restx.StdPWSweather,
weewx.restx.StdCWOP, weewx.restx.StdWOW, weewx.restx.StdAWEKAS
report_services = weewx.engine.StdPrint, weewx.engine.StdReport
#
################################################################################
[Weather34RealTime]
filename = /var/www/html/weewx/weather34/w34realtime.txt
unit_system = METRICWX
exclude_fields = rain
cache_enable = True
cache_directory = /tmp
cache_stale_time = 900
weewx_port = 25252
webserver_address = ""
weewxserver_address = ""
weewx_file_transfer = ""
#
################################################################################
[Weather34WebServices]
filename = /var/www/html/weewx/weather34/settings1.php
#
################################################################################
[Weather34WebServer]
enable = true
#
################################################################################
[Weather34CloudCover]
enable = true
db_field = signal8
wee_debug report successfully generated
Il giorno mercoledì 12 agosto 2020 alle 16:25:42 UTC+2 Mauro De Lauretis ha
scritto:
> This the syslog:
>
> Aug 12 16:19:33 raspberrypi systemd[1]: Starting LSB: weewx weather
> system...
>
> Aug 12 16:19:36 raspberrypi weewx[14231] INFO __main__: Initializing weewx
> version 4.1.1
>
> Aug 12 16:19:36 raspberrypi weewx[14231] INFO __main__: Using Python 3.7.3
> (default, Dec 20 2019, 18:57:59) #012[GCC 8.3.0]
>
> Aug 12 16:19:36 raspberrypi weewx[14231] INFO __main__: Platform
> Linux-5.4.51+-armv6l-with-debian-10.4
>
> Aug 12 16:19:36 raspberrypi weewx[14231] INFO __main__: Locale is
> 'it_IT.UTF-8'
>
> Aug 12 16:19:36 raspberrypi weewx[14231] INFO __main__: PID file is
> /var/run/weewx.pid
>
> Aug 12 16:19:36 raspberrypi weewx[14220]: Starting weewx weather system:
> weewx.
>
> Aug 12 16:19:36 raspberrypi systemd[1]: Started LSB: weewx weather system.
>
> Aug 12 16:19:37 raspberrypi weewx[14240] INFO __main__: Using
> configuration file /home/weewx/weewx.conf
>
> Aug 12 16:19:37 raspberrypi weewx[14240] INFO __main__: Debug is 1
>
> Aug 12 16:19:37 raspberrypi weewx[14240] DEBUG __main__: Initializing
> engine
>
> Aug 12 16:19:37 raspberrypi weewx[14240] INFO weewx.engine: Loading
> station type Vantage (weewx.drivers.vantage)
>
> Aug 12 16:19:37 raspberrypi weewx[14240] DEBUG weewx.drivers.vantage:
> Driver version is 3.2.1
>
> Aug 12 16:19:37 raspberrypi weewx[14240] DEBUG weewx.drivers.vantage:
> Opened up serial port /dev/ttyUSB0; baud 19200; timeout 4.00
>
> Aug 12 16:19:37 raspberrypi weewx[14240] DEBUG weewx.drivers.vantage:
> Gentle wake up of console successful
>
> Aug 12 16:19:37 raspberrypi weewx[14240] DEBUG weewx.drivers.vantage:
> Hardware type is 16
>
> Aug 12 16:19:38 raspberrypi weewx[14240] DEBUG weewx.drivers.vantage: ISS
> ID is 1
>
> Aug 12 16:19:38 raspberrypi weewx[14240] DEBUG weewx.drivers.vantage:
> Hardware name: Vantage Pro2
>
> Aug 12 16:19:38 raspberrypi weewx[14240] DEBUG weewx.engine: Loading
> service weewx.engine.StdTimeSynch
>
> Aug 12 16:19:38 raspberrypi weewx[14240] DEBUG weewx.engine: Finished
> loading service weewx.engine.StdTimeSynch
>
> Aug 12 16:19:38 raspberrypi weewx[14240] DEBUG weewx.engine: Loading
> service weewx.engine.StdConvert
>
> Aug 12 16:19:38 raspberrypi weewx[14240] INFO weewx.engine: StdConvert
> target unit is 0x10
>
> Aug 12 16:19:38 raspberrypi weewx[14240] DEBUG weewx.engine: Finished
> loading service weewx.engine.StdConvert
>
> Aug 12 16:19:38 raspberrypi weewx[14240] DEBUG weewx.engine: Loading
> service weewx.engine.StdCalibrate
>
> Aug 12 16:19:38 raspberrypi weewx[14240] DEBUG weewx.engine: Finished
> loading service weewx.engine.StdCalibrate
>
> Aug 12 16:19:38 raspberrypi weewx[14240] DEBUG weewx.engine: Loading
> service weewx.engine.StdQC
>
> Aug 12 16:19:38 raspberrypi weewx[14240] DEBUG weewx.engine: Finished
> loading service weewx.engine.StdQC
>
> Aug 12 16:19:38 raspberrypi weewx[14240] DEBUG weewx.engine: Loading
> service weewx.wxservices.StdWXCalculate
>
> Aug 12 16:19:38 raspberrypi weewx[14240] DEBUG weewx.manager: Daily
> summary version is 2.0
>
> Aug 12 16:19:38 raspberrypi weewx[14240] INFO weewx.wxservices: The
> following values will be calculated: pressure=prefer_hardware,
> altimeter=prefer_hardware, appTemp=prefer_hardware,
> barometer=prefer_hardware, beaufort=prefer_hardware,
> cloudbase=prefer_hardware, dewpoint=prefer_hardware, ET=prefer_hardware,
> heatindex=prefer_hardware, humidex=prefer_hardware,
> inDewpoint=prefer_hardware, maxSolarRad=prefer_hardware,
> rainRate=prefer_hardware, windchill=prefer_hardware, windrun=prefer_hardware
>
> Aug 12 16:19:38 raspberrypi weewx[14240] INFO weewx.wxservices: The
> following algorithms will be used for calculations: altimeter=aaASOS,
> maxSolarRad=RS
>
> Aug 12 16:19:38 raspberrypi weewx[14240] DEBUG weewx.engine: Finished
> loading service weewx.wxservices.StdWXCalculate
>
> Aug 12 16:19:38 raspberrypi weewx[14240] DEBUG weewx.engine: Loading
> service user.weather34.Weather34RealTime
>
> Aug 12 16:19:39 raspberrypi weewx[14240] INFO user.weather34: service
> version is 0.0.5
>
> Aug 12 16:19:39 raspberrypi weewx[14240] INFO user.weather34: output goes
> to /var/www/html/weewx/weather34/w34realtime.txt
>
> Aug 12 16:19:39 raspberrypi weewx[14240] INFO user.weather34: 'None'
> values will be displayed as NULL
>
> Aug 12 16:19:39 raspberrypi weewx[14240] INFO user.weather34: units will
> be displayed as METRICWX
>
> Aug 12 16:19:39 raspberrypi weewx[14240] INFO user.weather34: zambretti
> forecast: False
>
> Aug 12 16:19:39 raspberrypi weewx[14240] INFO user.weather34: Web Service:
> ds is installed
>
> Aug 12 16:19:39 raspberrypi weewx[14240] INFO user.weather34: Web Service:
> me is installed
>
> Aug 12 16:19:39 raspberrypi weewx[14240] INFO user.weather34: Web Service:
> eq is installed
>
> Aug 12 16:19:39 raspberrypi weewx[14240] INFO user.weather34: Web Service:
> ki is installed
>
> Aug 12 16:19:39 raspberrypi weewx[14240] INFO user.weather34: Web Service:
> wu is installed
>
> Aug 12 16:19:39 raspberrypi weewx[14240] INFO user.weather34: Web Service:
> aq is installed
>
> Aug 12 16:19:39 raspberrypi weewx[14240] INFO user.weather34: Web Service:
> al is installed
>
> Aug 12 16:19:39 raspberrypi weewx[14240] DEBUG user.weather34: CloudCover
> Url 1 "
> https://api.sat24.com/crop?type=visual5hdcomplete&lat=42.634585&lon=14.040554&width=300&height=300&zoom=1.00&continent=eu
> "
>
> Aug 12 16:19:39 raspberrypi weewx[14240] DEBUG user.weather34: CloudCover
> service has started
>
> Aug 12 16:19:39 raspberrypi weewx[14240] DEBUG user.weather34: CloudCover
> Url 2 "
> https://api.sat24.com/crop?type=infraPolair&lat=42.634585&lon=14.040554&width=300&height=300&zoom=1.00&continent=eu
> "
>
> Aug 12 16:19:39 raspberrypi weewx[14240] DEBUG user.weather34: CloudCover
> File 1 /var/www/html/weewx/weather34/jsondata/sat1.png
>
> Aug 12 16:19:39 raspberrypi weewx[14240] INFO user.weather34: Check
> lightning Strike Count: False
>
> Aug 12 16:19:39 raspberrypi weewx[14240] DEBUG user.weather34: CloudCover
> File 2 /var/www/html/weewx/weather34/jsondata/sat2.png
>
> Aug 12 16:19:39 raspberrypi weewx[14240] DEBUG user.weather34: excluding
> fields: {'rain'}
>
> Aug 12 16:19:39 raspberrypi weewx[14240] INFO user.weather34: Weather34
> Weather34RealTime in cache is: True
>
> Aug 12 16:19:39 raspberrypi weewx[14240] DEBUG weewx.engine: Finished
> loading service user.weather34.Weather34RealTime
>
> Aug 12 16:19:39 raspberrypi weewx[14240] DEBUG weewx.engine: Loading
> service weewx.engine.StdArchive
>
> Aug 12 16:19:39 raspberrypi weewx[14240] INFO weewx.engine: Archive will
> use data binding wx_binding
>
> Aug 12 16:19:39 raspberrypi weewx[14240] INFO weewx.engine: Record
> generation will be attempted in 'hardware'
>
> Aug 12 16:19:39 raspberrypi weewx[14240] INFO weewx.engine: Using archive
> interval of 300 seconds (specified by hardware)
>
> Aug 12 16:19:39 raspberrypi weewx[14240] DEBUG weewx.engine: Use LOOP data
> in hi/low calculations: 1
>
> Aug 12 16:19:39 raspberrypi weewx[14240] DEBUG weewx.engine: Finished
> loading service weewx.engine.StdArchive
>
> Aug 12 16:19:39 raspberrypi weewx[14240] DEBUG weewx.engine: Loading
> service weewx.restx.StdStationRegistry
>
> Aug 12 16:19:39 raspberrypi weewx[14240] INFO weewx.restx:
> StationRegistry: Station will be registered.
>
> Aug 12 16:19:39 raspberrypi weewx[14240] DEBUG weewx.engine: Finished
> loading service weewx.restx.StdStationRegistry
>
> Aug 12 16:19:39 raspberrypi weewx[14240] DEBUG weewx.engine: Loading
> service weewx.restx.StdWunderground
>
> Aug 12 16:19:39 raspberrypi weewx[14240] INFO weewx.restx: Wunderground:
> Posting not enabled.
>
> Aug 12 16:19:39 raspberrypi weewx[14240] DEBUG weewx.engine: Finished
> loading service weewx.restx.StdWunderground
>
> Aug 12 16:19:39 raspberrypi weewx[14240] DEBUG weewx.engine: Loading
> service weewx.restx.StdPWSweather
>
> Aug 12 16:19:39 raspberrypi weewx[14240] INFO weewx.restx: PWSweather:
> Posting not enabled.
>
> Aug 12 16:19:39 raspberrypi weewx[14240] DEBUG weewx.engine: Finished
> loading service weewx.restx.StdPWSweather
>
> Aug 12 16:19:39 raspberrypi weewx[14240] DEBUG weewx.engine: Loading
> service weewx.restx.StdCWOP
>
> Aug 12 16:19:39 raspberrypi weewx[14240] INFO weewx.restx: CWOP: Posting
> not enabled.
>
> Aug 12 16:19:39 raspberrypi weewx[14240] DEBUG weewx.engine: Finished
> loading service weewx.restx.StdCWOP
>
> Aug 12 16:19:39 raspberrypi weewx[14240] DEBUG weewx.engine: Loading
> service weewx.restx.StdWOW
>
> Aug 12 16:19:39 raspberrypi weewx[14240] INFO weewx.restx: WOW: Posting
> not enabled.
>
> Aug 12 16:19:39 raspberrypi weewx[14240] DEBUG weewx.engine: Finished
> loading service weewx.restx.StdWOW
>
> Aug 12 16:19:39 raspberrypi weewx[14240] DEBUG weewx.engine: Loading
> service weewx.restx.StdAWEKAS
>
> Aug 12 16:19:39 raspberrypi weewx[14240] INFO weewx.restx: AWEKAS: Posting
> not enabled.
>
> Aug 12 16:19:39 raspberrypi weewx[14240] DEBUG weewx.engine: Finished
> loading service weewx.restx.StdAWEKAS
>
> Aug 12 16:19:39 raspberrypi weewx[14240] DEBUG weewx.engine: Loading
> service weewx.engine.StdPrint
>
> Aug 12 16:19:39 raspberrypi weewx[14240] DEBUG weewx.engine: Finished
> loading service weewx.engine.StdPrint
>
> Aug 12 16:19:39 raspberrypi weewx[14240] DEBUG weewx.engine: Loading
> service weewx.engine.StdReport
>
> Aug 12 16:19:39 raspberrypi weewx[14240] DEBUG weewx.engine: Finished
> loading service weewx.engine.StdReport
>
> Aug 12 16:19:40 raspberrypi weewx[14240] INFO __main__: Starting up weewx
> version 4.1.1
>
> Aug 12 16:19:40 raspberrypi weewx[14240] DEBUG weewx.drivers.vantage:
> Gentle wake up of console successful
>
> Aug 12 16:19:40 raspberrypi weewx[14240] INFO weewx.engine: Clock error is
> -3.06 seconds (positive is fast)
>
> Aug 12 16:19:40 raspberrypi weewx[14240] INFO weewx.engine: Using binding
> 'wx_binding' to database 'weewx.sdb'
>
> Aug 12 16:19:40 raspberrypi weewx[14240] INFO weewx.manager: Starting
> backfill of daily summaries
>
> Aug 12 16:19:40 raspberrypi weewx[14240] DEBUG weewx.drivers.vantage:
> Getting archive packets since 2020-08-12 16:15:00 CEST (1597241700)
>
> Aug 12 16:19:40 raspberrypi weewx[14240] DEBUG weewx.drivers.vantage:
> Gentle wake up of console successful
>
> Aug 12 16:19:40 raspberrypi weewx[14240] DEBUG weewx.drivers.vantage:
> Retrieving 0 page(s); starting index= 0
>
> Aug 12 16:19:40 raspberrypi weewx[14240] INFO weewx.engine: Starting main
> packet loop.
>
> Aug 12 16:19:40 raspberrypi weewx[14240] DEBUG weewx.drivers.vantage:
> Gentle wake up of console successful
>
> Aug 12 16:19:40 raspberrypi weewx[14240] DEBUG weewx.drivers.vantage:
> Requesting 200 LOOP packets.
>
> Aug 12 16:19:40 raspberrypi weewx[14240] DEBUG weewx.drivers.vantage:
> Gentle wake up of console successful
>
> Aug 12 16:19:40 raspberrypi weewx[14240] DEBUG user.weather34: CloudCover
> url1 exit code 0
>
> Aug 12 16:19:42 raspberrypi weewx[14240] DEBUG user.weather34: CloudCover
> url2 exit code 0
>
> Aug 12 16:19:42 raspberrypi weewx[14240] DEBUG PIL.PngImagePlugin: STREAM
> b'IHDR' 16 13
>
> Aug 12 16:19:42 raspberrypi weewx[14240] DEBUG PIL.PngImagePlugin: STREAM
> b'gAMA' 41 4
>
> Aug 12 16:19:42 raspberrypi weewx[14240] DEBUG PIL.PngImagePlugin: STREAM
> b'pHYs' 57 9
>
> Aug 12 16:19:42 raspberrypi weewx[14240] DEBUG PIL.PngImagePlugin: STREAM
> b'IDAT' 78 65458
>
> Aug 12 16:19:42 raspberrypi weewx[14240] DEBUG PIL.Image: Error closing:
> 'Image' object has no attribute 'fp'
>
> Aug 12 16:19:49 raspberrypi weewx[14240] DEBUG user.weather34: Webserver:
> weewx host ip 192.168.178.31 listening on port 25252
>
> Aug 12 16:20:15 raspberrypi weewx[14240] DEBUG weewx.drivers.vantage:
> Getting archive packets since 2020-08-12 16:15:00 CEST (1597241700)
>
> Aug 12 16:20:15 raspberrypi weewx[14240] DEBUG weewx.drivers.vantage:
> Gentle wake up of console successful
>
> Aug 12 16:20:15 raspberrypi weewx[14240] DEBUG weewx.drivers.vantage:
> Retrieving 1 page(s); starting index= 1
>
> Aug 12 16:20:16 raspberrypi weewx[14240] DEBUG user.weather34: CloudCover:
> Percent value is 1
>
> Aug 12 16:20:16 raspberrypi weewx[14240] INFO weewx.manager: Added record
> 2020-08-12 16:20:00 CEST (1597242000) to database 'weewx.sdb'
>
> Aug 12 16:20:17 raspberrypi weewx[14240] INFO weewx.manager: Added record
> 2020-08-12 16:20:00 CEST (1597242000) to daily summary in 'weewx.sdb'
>
> Aug 12 16:20:17 raspberrypi weewx[14240] DEBUG weewx.drivers.vantage:
> DMPAFT complete: page timestamp 2020-08-03 18:35:00 CEST (1596472500) less
> than final timestamp 2020-08-12 16:20:00 CEST (1597242000)
>
> Aug 12 16:20:17 raspberrypi weewx[14240] DEBUG weewx.drivers.vantage:
> Catch up complete.
>
> Aug 12 16:20:17 raspberrypi weewx[14240] DEBUG weewx.reportengine: Running
> reports for latest time in the database.
>
> Aug 12 16:20:17 raspberrypi weewx[14240] DEBUG weewx.drivers.vantage:
> Requesting 200 LOOP packets.
>
> Aug 12 16:20:17 raspberrypi weewx[14240] DEBUG weewx.reportengine: Report
> 'SeasonsReport' not enabled. Skipping.
>
> Aug 12 16:20:17 raspberrypi weewx[14240] DEBUG weewx.reportengine: Report
> 'SmartphoneReport' not enabled. Skipping.
>
> Aug 12 16:20:17 raspberrypi weewx[14240] DEBUG weewx.reportengine: Report
> 'MobileReport' not enabled. Skipping.
>
> Aug 12 16:20:17 raspberrypi weewx[14240] DEBUG weewx.drivers.vantage:
> Gentle wake up of console successful
>
> Aug 12 16:20:17 raspberrypi weewx[14240] DEBUG weewx.reportengine: Report
> 'StandardReport' not enabled. Skipping.
>
> Aug 12 16:20:17 raspberrypi weewx[14240] DEBUG weewx.reportengine: Report
> 'FTP' not enabled. Skipping.
>
> Aug 12 16:20:17 raspberrypi weewx[14240] DEBUG weewx.reportengine: Report
> 'RSYNC' not enabled. Skipping.
>
> Aug 12 16:20:17 raspberrypi weewx[14240] DEBUG weewx.reportengine: Running
> report 'Weather34Report'
>
> Aug 12 16:20:17 raspberrypi weewx[14240] DEBUG weewx.reportengine: Found
> configuration file /home/weewx/skins/Weather34/skin.conf for report
> 'Weather34Report'
>
> Aug 12 16:20:18 raspberrypi weewx[14240] INFO weewx.restx:
> StationRegistry: Published record 2020-08-12 16:20:00 CEST (1597242000)
>
> Aug 12 16:20:21 raspberrypi weewx[14240] DEBUG weewx.cheetahgenerator:
> Using search list ['weewx.cheetahgenerator.Almanac',
> 'weewx.cheetahgenerator.Station', 'weewx.cheetahgenerator.Current',
> 'weewx.cheetahgenerator.Stats', 'weewx.cheetahgenerator.UnitInfo',
> 'weewx.cheetahgenerator.Extras', 'user.stats.MyStats',
> 'user.lastrain.lastRainTags']
>
> Aug 12 16:20:21 raspberrypi weewx[14240] DEBUG weewx.manager: Daily
> summary version is 2.0
>
> Aug 12 16:20:31 raspberrypi weewx[14240] INFO weewx.cheetahgenerator:
> Generated 2 files for report Weather34Report in 10.23 seconds
>
> Aug 12 16:20:31 raspberrypi weewx[14240] INFO weewx.reportengine: Copied 0
> files to /var/www/html/weewx/weather34/
>
> Aug 12 16:20:31 raspberrypi weewx[14240] DEBUG weewx.reportengine: Running
> report 'w34Highcharts'
>
> Aug 12 16:20:31 raspberrypi weewx[14240] DEBUG weewx.reportengine: Found
> configuration file /home/weewx/skins/w34Highcharts/skin.conf for report
> 'w34Highcharts'
>
> Aug 12 16:20:32 raspberrypi weewx[14240] DEBUG weewx.cheetahgenerator:
> Using search list ['weewx.cheetahgenerator.Almanac',
> 'weewx.cheetahgenerator.Station', 'weewx.cheetahgenerator.Current',
> 'weewx.cheetahgenerator.Stats', 'weewx.cheetahgenerator.UnitInfo',
> 'weewx.cheetahgenerator.Extras',
> 'user.w34highchartsSearchX.w34highcharts_temp_week',
> 'user.w34highchartsSearchX.w34highcharts_bar_rain_week',
> 'user.w34highchartsSearchX.w34highcharts_wind_week',
> 'user.w34highchartsSearchX.w34highcharts_solar_week',
> 'user.w34highchartsSearchX.w34highcharts_indoor_derived_week',
> 'user.w34highchartsSearchX.w34highcharts_wind_rose_week',
> 'user.w34highchartsSearchX.w34highchartsYear']
>
> Aug 12 16:20:32 raspberrypi weewx[14240] DEBUG weewx.manager: Daily
> summary version is 2.0
>
> Aug 12 16:20:40 raspberrypi weewx[14240] ERROR user.weather34: Failed
> getting web service data. URL:
> https://api.forecast.io/forecast/darksky_key/42.634585,14.040554?lang=it&units=uk2
>
> Header: ["'User-Agent'", "'Mozilla/5.0 (Macintosh; U; Intel Mac OS X
> 10_6_4; en-US) AppleWebKit/534.3 (KHTML, like Gecko) Chrome/6.0.472.63
> Safari/534.3'"], Error: HTTP Error 403: Forbidden
>
> Aug 12 16:20:50 raspberrypi weewx[14240] INFO weewx.cheetahgenerator:
> Generated 7 files for report w34Highcharts in 18.34 seconds
>
> Aug 12 16:20:50 raspberrypi weewx[14240] INFO weewx.reportengine: Copied 0
> files to /var/www/html/weewx/weather34/w34highcharts
>
> Il giorno mercoledì 12 agosto 2020 alle 16:24:51 UTC+2 Mauro De Lauretis
> ha scritto:
>
>> ****
>>
>> root@raspberrypi:/var/www/html/weewx/weather34/w34highcharts/scripts# cat
>> plots_config.js
>>
>> var pathjsonfiles = "json/"; //Location weewx report output
>> json files from home location of weewx. DO NOT CHANGE UNLESS YOU CHANGE
>> SKIN DIRECTORY.
>>
>> var pathjsondayfiles = "json_day/"; //Location day report output
>> json files from home location of where wee_report_34 run. DO NOT CHANGE
>> UNLESS YOU CHANGE SKIN DIRECTORY.
>>
>> var weereportcmd = "./wee_reports_w34"; //Command to run wee_report_34.
>> DO NOT CHANGE.
>>
>> var realtimefilename = "w34realtime.txt"; //File name must match what is
>> in the weewx config for realtime
>>
>>
>> var autoupdateinterval = 60; //This is seconds
>>
>> var realtimeinterval = 10; //This is seconds
>>
>> var hide_zero_wind_barb = false; //Hide/display Zero Barb
>>
>> var disable_day_plots = false; //Disable day plots
>>
>>
>> //[0] array offset(s) to wanted real-time data(s)(can be empty),[1] array
>> offset(s) to data's real-time units(can be empty),[2] array of unit convert
>> function(s)(can be empty), [3] plot type, [4] plot X resolution, [5] delta
>> value
>>
>> // The (can be empty) entries then must have a plot_type that is another
>> plot type entry with fill in values this is how to display a different
>> plot_type when using real-time data.
>>
>> var realtimeplot = {
>>
>>
>> temperatureplot:[[2,4],[14,14],['convert_temp','convert_temp'],['temperatureplot'],[150]],
>>
>>
>> tempallplot:[[2,4,3],[14,14,-1],['convert_temp','convert_temp',null],['tempallplot'],
>>
>> [150]],
>>
>> winddirplot:[[7],[13],['convert_wind'],['winddirplot'], [150]],
>>
>> windplot:[[6],[13],['convert_wind'],['windplot'],[150]],
>>
>>
>> windallplot:[[5,40,46],[13,13,-1],['convert_wind','convert_wind',null],['windallplot'],[150]],
>>
>>
>> barometerplot:[[10],[15],['convert_pressure'],['barometerplot'],[150]],
>>
>>
>> rainplot:[[47,8],[16,16],['convert_rain','convert_rain'],['rainplot'],[50],[]],
>>
>> windroseplot:[[6,11],[13,-1],['convert_wind',
>> null],['windroseplot'],[150]],
>>
>> windrosegustplot:[[63,46],[13,-1],['convert_wind',
>> null],['windrosegustplot'],[150]]
>>
>> };
>> ****
>> Il giorno mercoledì 12 agosto 2020 alle 10:13:47 UTC+2 Mauro De Lauretis
>> ha scritto:
>>
>>> The location of the executable is there because it is installed liked
>>> that to run on the local server.
>>>
>>> If I try to do sudo PYTHONPATH=/home/weewx/bin python3
>>> /var/www/html/weewx/weather34/w34highcharts/wee_reports_w34 I get this:
>>>
>>> *pi@raspberrypi*:*~ $* sudo su
>>>
>>> root@raspberrypi:/home/pi# sudo PYTHONPATH=/home/weewx/bin python3
>>> /var/www/html/weewx/weather34/w34highcharts/wee_reports_w34
>>>
>>> Using configuration file /home/weewx/weewx.conf
>>>
>>> Generating for all time
>>>
>>> Traceback (most recent call last):
>>>
>>> File "/var/www/html/weewx/weather34/w34highcharts/wee_reports_w34",
>>> line 99, in <module>
>>>
>>> main()
>>>
>>> File "/var/www/html/weewx/weather34/w34highcharts/wee_reports_w34",
>>> line 68, in main
>>>
>>> config_dict['StdReport']['w34Highcharts']['CheetahGenerator'] =
>>> {'search_list_extensions': 'user.w34highchartsSearchX.w34highcharts_' +
>>> args[1].split('/')[-1].split('.')[0], 'encoding': 'strict_ascii', 'ToDate':
>>> {'DayJSON': {'template': args[1],'HTML_ROOT': args[2]}}}
>>>
>>> IndexError: list index out of range
>>>
>>>
>>> Il giorno mercoledì 12 agosto 2020 alle 03:27:38 UTC+2 [email protected]
>>> ha scritto:
>>>
>>>> You're probably right. I suspect the custom weather34 installer went a
>>>> little ... off track.
>>>>
>>>> On Tue, Aug 11, 2020 at 6:02 PM J D <[email protected]> wrote:
>>>>
>>>>> This is not a weewx issue or a python path issue. The file is in the
>>>>> correct location, but the troubleshooting guide must be done to find out
>>>>> why there is an error.
>>>>>
>>>>
>>>>>
>>>>> On Tuesday, August 11, 2020 at 3:27:16 PM UTC-7, Mauro De Lauretis
>>>>> wrote:
>>>>>>
>>>>>> Hi all!
>>>>>> I'm running the last version of weewx with python3 on my Raspberry Pi.
>>>>>> As skin I use the weather34 weewx version (
>>>>>> https://github.com/steepleian/weewx-Weather34)
>>>>>>
>>>>>> There are also incorporated highcharts that are created live from the
>>>>>> database when selecting on the website.
>>>>>> However, a part of them won't work with my setup and this Is the
>>>>>> message I get:
>>>>>>
>>>>>>
>>>>>> root@raspberrypi:~# sudo python3
>>>>>> /var/www/html/weewx/weather34/w34highcharts/wee_reports_w34
>>>>>>
>>>>>> Traceback (most recent call last):
>>>>>>
>>>>>> File "/var/www/html/weewx/weather34/w34highcharts/wee_reports_w34",
>>>>>> line 8, in <module>
>>>>>>
>>>>>> import weewx
>>>>>>
>>>>>> ModuleNotFoundError: No module named 'weewx'
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> Do you have any ideas what the issue could be?
>>>>>>
>>>>>>
>>>>>> Thanks
>>>>>>
>>>>>>
>>>>>> Mauro
>>>>>>
>>>>> --
>>>>>
>>>> You received this message because you are subscribed to the Google
>>>>> Groups "weewx-user" group.
>>>>> To unsubscribe from this group and stop receiving emails from it, send
>>>>> an email to [email protected].
>>>>>
>>>> To view this discussion on the web visit
>>>>> https://groups.google.com/d/msgid/weewx-user/ca782342-2160-4630-aee3-438d53a85c50o%40googlegroups.com
>>>>>
>>>>> <https://groups.google.com/d/msgid/weewx-user/ca782342-2160-4630-aee3-438d53a85c50o%40googlegroups.com?utm_medium=email&utm_source=footer>
>>>>> .
>>>>>
>>>>
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/weewx-user/0366718c-aaa8-4a68-9e1b-7ab2f7006cdcn%40googlegroups.com.
