Hi All, I am running Weewx 4.1.1 on a Raspberry Pi Model 3. I am using an Arduino microcontroller to capture sensor data and a python program on the Pi to capture the data and write it to a csv file. I am using the fileparse to read that file to pass data to Weewx.
While my Weewx version was still 3.9.1, I added two observations, WindSpeed2Avg and WindGust10Avg. The weather station is located at our RC flying field and since we upload the data to a web server, wind and gust observations are as old as 5 minutes. The averages help to determine actual conditions over the average times. It was displayed properly with no decimal places as was the wind direction. Since upgrading to version 4.1.1 those observations now display with 6 decimal places!! The wind direction degrees also display this way. Can anyone direct me to where I can change this back to displaying no decimal places? Thanks in advance!! -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/be00c4a2-71ca-46b1-aeb4-5a093531cfe5n%40googlegroups.com.
