I'm not a programmer so I don't have helpful suggestions. But as a Canadian user, I hope that you figure this out. I use the "metric" option but think of wind speed in kph, not m/s, for example. I did get the Humidex added (a long time ago - I forget how I did it other than I know I didn't do the programming but found that someone else had already figured out and I just followed the instructions!)
Just as I type this, Tom's reply popped up.. Guess it won't be easy to add a new "Canadian option". The instructions for changing individual units is in the documentation but if you could make a "Canada-specific" set (cookbook style) that would be really useful for those of us who are users-but-not-programmers. Keep us posted. David On Monday, August 24, 2020 at 11:37:18 p.m. UTC-4 [email protected] wrote: > Hi All, > > I'm trying to extend weewx so that there is a 4th option for unit systems > called "CANMETRICWX" (Canadian Metric). > > This would be the same as "METRIC" except rain values are in mm and > pressure values are in kPa and eventually would also include a "Humidex" > calculation as well. > > I thought I had added everything I needed throughout the file system for > the addition of the units system but I'm running into the following > complaint on startup: > > "AttributeError: module 'weewx' has no attribute 'CANMETRICWX'" > > Not being familiar enough with python, I am stumped as to where I can add > that attribute. Any help greatly appreciated. > > Cheers > > Chris > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/f52611dc-6ae8-4864-9eda-5d252e9a5404n%40googlegroups.com.
