Tom, If I run weewxd from the command line I get this - LOOP: 2020-08-29 11:59:24 CDT (1598720364) altimeter: None, appTemp: -7.2, barometer: 27.1853064925, beaufort: 0, cloudbase: None, daily_rain: 0.01, dateTime: 1598720364, day_of_year: 0, dewpoint: None, heatindex: 0.0, humidex: None, inDewpoint: 45.6772715087, inHumidity: 22.0, inTemp: 89.6, maxSolarRad: None, minute_of_day: 0, *outHumidity: 0.0, outTemp: 0.0, *pressure: None, rain: 0.0, rainRate: 0, rain_total: 0.01, usUnits: 1, wind_average: 0.0, windchill: 0.0, windDir: None, windSpeed: 0.0 LOOP: 2020-08-29 11:59:25 CDT (1598720365) altimeter: None, appTemp: -7.2, barometer: 27.1853064925, beaufort: 0, cloudbase: None, daily_rain: 0.01, dateTime: 1598720365, day_of_year: 0, dewpoint: None, heatindex: 0.0, humidex: None, inDewpoint: 45.6772715087, inHumidity: 22.0, inTemp: 89.6, maxSolarRad: None, minute_of_day: 0, *outHumidity: 0.0, outTemp: 0.0,* pressure: None, rain: 0.0, rainRate: 0, rain_total: 0.01, usUnits: 1, wind_average: 0.0, windchill: 0.0, windDir: None, windSpeed: 0.0 LOOP: 2020-08-29 11:59:26 CDT (1598720366) altimeter: None, appTemp: -7.2, barometer: 27.1853064925, beaufort: 0, cloudbase: None, daily_rain: 0.01, dateTime: 1598720366, day_of_year: 0, dewpoint: None, heatindex: 0.0, humidex: None, inDewpoint: 45.6772715087, inHumidity: 22.0, inTemp: 89.6, maxSolarRad: None, minute_of_day: 0, *outHumidity: 0.0, outTemp: 0.0, *pressure: None, rain: 0.0, rainRate: 0, rain_total: 0.01, usUnits: 1, wind_average: 0.0, windchill: 0.0, windDir: None, windSpeed: 0.0 LOOP: 2020-08-29 11:59:27 CDT (1598720367) altimeter: None, appTemp: -7.2, barometer: 27.1853064925, beaufort: 0, cloudbase: None, daily_rain: 0.01, dateTime: 1598720367, day_of_year: 0, dewpoint: None, heatindex: 0.0, humidex: None, inDewpoint: 45.6772715087, inHumidity: 22.0, inTemp: 89.6, maxSolarRad: None, minute_of_day: 0, *outHumidity: 0.0, outTemp: 0.0, *pressure: None, rain: 0.0, rainRate: 0, rain_total: 0.01, usUnits: 1, wind_average: 0.0, windchill: 0.0, windDir: None, windSpeed: 0.0
The outHumidity and the outTemp both show up with 0.0. Running a script direct to the sensor (Adafruit_DHT) I get this - Temp=35.7*C Humidity =39.9% Temp=35.7*C Humidity =39.9% Temp=35.7*C Humidity =39.9% Temp=35.7*C Humidity =39.9% Temp=35.7*C Humidity =39.9% So, either the service for the external sensor is the problem or could it be caused by no date and time received with the record? Again, this is an Adafruit_DHT285 connected to GPIO pins on the Raspberry Pi. Thanks Michael H Grossie [email protected] On Fri, Aug 28, 2020 at 7:08 PM Tom Keffer <[email protected]> wrote: > If you run weewxd directly from the command line > <http://www.weewx.com/docs/usersguide.htm#Running_directly>, it will > print out the contents of LOOP packets and archive records. Do you see > outHumidity and outTemp in them? > > On Fri, Aug 28, 2020 at 4:48 PM Michael Grossie <[email protected]> > wrote: > >> Moving the "extra_sensors_service.ExtraSensorsService," to >> home/weewx/bin/user and changing the weewx.conf file did the trick. I also >> had to move the Adafruit_DHT module to the same location. I now see data >> flowing across my screen and filling the newly created weewx.sdb. I just >> have one little issue - For some reason the "Extra_sensors_services" is not >> adding the data to the weewx.sdb. The "services" file is posted at the end. >> Would the date not being correct on the WS1 be a cause of this type of >> problem? >> ------------------------ >> import syslog >> import weewx >> import time >> import os >> from weewx.wxengine import StdService >> #import Adafruit_BMP.BMP085 as BMP085 >> import Adafruit_DHT >> >> DHT_SENSOR = Adafruit_DHT.DHT22 >> DHT_PIN = 4 >> >> class ExtraSensorsService(StdService): >> def __init__(self, engine, config_dict): >> super(ExtraSensorsService, self).__init__(engine, config_dict) >> >> d = config_dict.get('ExtraSensorsService', {}) >> # Read from config which pin to use on the RPI GPIO >> # Defaults to 4 >> self.DHT22_pin = d.get('DHT22_pin', 4) >> # Use the loop packet event as that allows data to still get into >> the WeeWX database >> # as well as supporting a OLED module on the RPI >> self.bind(weewx.NEW_LOOP_PACKET, self.load_data) >> >> def load_data(self, event): >> try: >> #self.get_bmp180(event) >> self.get_DHT22(event) >> except Exception, e: >> syslog.syslog(syslog.LOG_ERR, "extrasensors: cannot read >> value: %s" % e) >> >> # Get BMP180 data >> #def get_bmp180(self, event): >> # sensor = BMP085.BMP085() >> >> # pressure = float(sensor.read_pressure()/100.0) >> # syslog.syslog(syslog.LOG_DEBUG, "extrasensors: found pressure >> value of %s mbar" % pressure) >> # NOTE: stores as mbar >> # event.packet['pressure'] = float(pressure) >> >> # Get DHT22 data >> def get_DHT22(self, event): >> humidity, temperature = DHT.read_retry(DHT.DHT22, self.DHT22_pin) >> if humidity is not None: >> syslog.syslog(syslog.LOG_DEBUG, "extrasensors: found humidity >> value of %s %%" % humidity) >> event.packet['outHumidity'] = float(humidity) >> if temperature is not None: >> syslog.syslog(syslog.LOG_DEBUG, "extrasensors: found >> temperature value of %s C" % temperature) >> # NOTE: stores as celsius >> event.packet['outTemp'] = float(temperature) >> ------------------------------------- >> >> TIA >> >> >> On Thursday, August 27, 2020 at 7:44:01 PM UTC-5, Michael Grossie wrote: >>> >>> Thanks Tom, I put it in home/weewx - I'll move it to >>> /home/weewx/bin/user and then change the weewx.config >>> >>> >>> >>> >>> >>> Michael H Grossie >>> [email protected] >>> >>> >>> On Thu, Aug 27, 2020 at 6:49 PM Tom Keffer <[email protected]> wrote: >>> >>>> Where did you put the module extra_sensors_service.py? Under >>>> [[Services]] you have >>>> >>>> data_services = weewx.extra_sensors_service.ExtraSensorsService, >>>> >>>> This means that the engine will be expecting to find it in >>>> /home/weewx/bin/weewx/extra_sensors_service.py. >>>> >>>> This is not a great place for it because it will be lost on the next >>>> upgrade. A better place is to put it in /home/weewx/bin/user. Modules there >>>> are preserved across an upgrade. >>>> >>>> Then the option "data_services" becomes >>>> >>>> data_services = user.extra_sensors_service.ExtraSensorsService, >>>> >>>> -tk >>>> >>>> On Thu, Aug 27, 2020 at 10:49 AM Michael Grossie <[email protected]> >>>> wrote: >>>> >>>>> Raspberry Pi 2B+ >>>>> Install with setup.py >>>>> Station - Simulator (Originally) >>>>> Weewx - 4.1.1 >>>>> PATH - Home/Weewx >>>>> >>>>> Had the weewx setup and working perfectly (as far as I know) with the >>>>> Simulator weather station while I waited for my ADS-WS1 to arrive. When it >>>>> arrived, I connected it via the directions found in an Instructables >>>>> Raspberry Pi Weather Station document. >>>>> >>>>> Confirmed that the ADS-WS1 was functioning via running the Wxconfig >>>>> file from ADS with the WS1 connected to a Windows 10 Computer. >>>>> >>>>> Connected the WS1 to the Raspberry Pi with serial to USB cable. Set >>>>> the ttyUSB0 port on the Raspberry Pi to 2400 8N1. Using Minicom, confirmed >>>>> that data was flowing from the WS1. >>>>> >>>>> !!0000001F0000000023A402DD0000015E0000000000000000 >>>>> !!0000001F0000000023A302DD0000015E0000000000000000 >>>>> !!0000001F0000000023A402DD0000015E0000000000000000 >>>>> !!0000001F0000000023A402DD0000015E0000000000000000 >>>>> !!0000001F0000000023A302DD0000015E0000000000000000 >>>>> !!0000001F0000000023A402DD0000015E0000000000000000 >>>>> !!0000001F0000000023A402DD0000015E0000000000000000 >>>>> !!0000001F0000000023A402DD0000015E0000000000000000 >>>>> !!0000001F0000000023A402DD0000015E0000000000000000 >>>>> >>>>> Changed the weewx configuration file using *sudo python3 >>>>> ./bin/wee_config --reconfigure *to indicate the WS1 as the weather >>>>> station being used. Deleted the weewx.sdb folder from home/weewx/archive. >>>>> >>>>> When attempting to start weewx with *sudo /home/weewx/bin/weewxd* I >>>>> receive the following - >>>>> >>>>> $ sudo python /home/weewx/bin/weewxd >>>>> Traceback (most recent call last): >>>>> File "/home/weewx/bin/weewxd", line 261, in <module> >>>>> main() >>>>> File "/home/weewx/bin/weewxd", line 148, in main >>>>> engine = weewx.engine.StdEngine(config_dict) >>>>> File "/home/weewx/bin/weewx/engine.py", line 75, in __init__ >>>>> self.loadServices(config_dict) >>>>> File "/home/weewx/bin/weewx/engine.py", line 138, in loadServices >>>>> obj = weeutil.weeutil.get_object(svc)(self,config_dict) >>>>> File "/home/weewx/bin/weeutil/weeutil.py", line 1093, in get_object >>>>> mod = __import__(module) >>>>> ImportError: No module named extra_sensors_service >>>>> >>>>> Running - *sudo /etc/init.d/weewx status -ls* provides - >>>>> >>>>> weewx.service - LSB: weewx weather system >>>>> Loaded: loaded (/etc/init.d/weewx; generated; vendor preset: >>>>> enabled) >>>>> Active: active (exited) since Thu 2020-08-27 11:25:07 CDT; 1h 12min >>>>> ago >>>>> Docs: man:systemd-sysv-generator(8) >>>>> Process: 22526 ExecReload=/etc/init.d/weewx reload (code=exited, >>>>> status=0/SUCCESS) >>>>> Process: 295 ExecStart=/etc/init.d/weewx start (code=exited, >>>>> status=0/SUCCESS) >>>>> >>>>> Aug 27 11:25:08 raspberrypi weewxd[562]: weewx[562] CRITICAL >>>>> __main__: **** File "/home/weewx/bin/weewx/engine.py", line 138, in >>>>> loadServices >>>>> Aug 27 11:25:08 raspberrypi weewxd[562]: weewx[562] CRITICAL >>>>> __main__: **** obj = >>>>> weeutil.weeutil.get_object(svc)(self,config_dict) >>>>> Aug 27 11:25:08 raspberrypi weewxd[562]: weewx[562] CRITICAL >>>>> __main__: **** File "/home/weewx/bin/weeutil/weeutil.py", line >>>>> 1093, >>>>> in get_object >>>>> Aug 27 11:25:08 raspberrypi weewxd[562]: weewx[562] CRITICAL >>>>> __main__: **** mod = __import__(module) >>>>> Aug 27 11:25:08 raspberrypi weewxd[562]: weewx[562] CRITICAL >>>>> __main__: **** ImportError: No module named extra_sensors_service >>>>> Aug 27 11:25:08 raspberrypi weewxd[562]: weewx[562] CRITICAL >>>>> __main__: **** Exiting. >>>>> Aug 27 12:11:44 raspberrypi systemd[1]: Reloading LSB: weewx weather >>>>> system. >>>>> Aug 27 12:11:44 raspberrypi weewx[22526]: Reloading weewx weather >>>>> system: weewxstart-stop-daemon: warning: failed to kill 562: No such >>>>> process >>>>> Aug 27 12:11:44 raspberrypi weewx[22526]: . >>>>> Aug 27 12:11:44 raspberrypi systemd[1]: Reloaded LSB: weewx weather >>>>> system. >>>>> >>>>> The ImportError No module named extra_sensors_service - was not there >>>>> when using the Simulator weather station. This is referring to a DHT-22 >>>>> that is connected to the Raspberry Pi and was "working" with the Simulator >>>>> weather station. >>>>> >>>>> As weewx does not start, the home/weewx/archive/weewx.sdb has not been >>>>> recreated. >>>>> >>>>> *Configuration file is below.* >>>>> >>>>> # WEEWX CONFIGURATION FILE >>>>> # >>>>> # Copyright (c) 2009-2019 Tom Keffer >>>>> # See the file LICENSE.txt for your rights. >>>>> >>>>> >>>>> ############################################################################## >>>>> >>>>> # This section is for general configuration information. >>>>> >>>>> # Set to 1 for extra debug info, otherwise comment it out or set to >>>>> zero >>>>> debug = 1 >>>>> >>>>> # Root directory of the weewx data file hierarchy for this station >>>>> WEEWX_ROOT = /home/weewx >>>>> >>>>> # Whether to log successful operations >>>>> log_success = True >>>>> >>>>> # Whether to log unsuccessful operations >>>>> log_failure = True >>>>> >>>>> # How long to wait before timing out a socket (FTP, HTTP) connection >>>>> socket_timeout = 20 >>>>> >>>>> # Do not modify this. It is used when installing and updating weewx. >>>>> version = 4.1.1 >>>>> >>>>> >>>>> ############################################################################## >>>>> >>>>> # This section is for information about the station. >>>>> >>>>> [Station] >>>>> >>>>> # Description of the station location >>>>> location = "Casita - Yuma, AZ" >>>>> >>>>> # Latitude in decimal degrees. Negative for southern hemisphere >>>>> latitude = 31.6288 >>>>> # Longitude in decimal degrees. Negative for western hemisphere. >>>>> longitude = -114.4056 >>>>> >>>>> # Altitude of the station, with unit it is in. This is downloaded >>>>> from >>>>> # from the station if the hardware supports it. >>>>> altitude = 424, foot # Choose 'foot' or 'meter' for unit >>>>> >>>>> # Set to type of station hardware. There must be a corresponding >>>>> stanza >>>>> # in this file with a 'driver' parameter indicating the driver to >>>>> be used. >>>>> station_type = WS1 >>>>> >>>>> # If you have a website, you may specify an URL >>>>> station_url = http://www.grossie.net >>>>> >>>>> # The start of the rain year (1=January; 10=October, etc.). This is >>>>> # downloaded from the station if the hardware supports it. >>>>> rain_year_start = 1 >>>>> >>>>> # Start of week (0=Monday, 6=Sunday) >>>>> week_start = 6 >>>>> >>>>> >>>>> ############################################################################## >>>>> >>>>> [WS1] >>>>> # This section is for the ADS WS1 series of weather stations. >>>>> >>>>> # Driver mode - tcp, udp, or serial >>>>> mode = serial >>>>> >>>>> # If serial, specify the serial port device. (ex. /dev/ttyS0, >>>>> /dev/ttyUSB0, >>>>> # or /dev/cuaU0) >>>>> # If TCP, specify the IP address and port number. (ex. >>>>> 192.168.36.25:3000) >>>>> port = /dev/ttyUSB0 >>>>> >>>>> # The amount of time, in seconds, before the connection fails if >>>>> there is >>>>> # no response >>>>> timeout = 10 >>>>> >>>>> # The driver to use: >>>>> driver = weewx.drivers.ws1 >>>>> >>>>> >>>>> ############################################################################## >>>>> >>>>> [Simulator] >>>>> # This section is for the weewx weather station simulator >>>>> >>>>> # The time (in seconds) between LOOP packets. >>>>> loop_interval = 2.5 >>>>> >>>>> # The simulator mode can be either 'simulator' or 'generator'. >>>>> # Real-time simulator. Sleep between each LOOP packet. >>>>> mode = simulator >>>>> # Generator. Emit LOOP packets as fast as possible (useful for >>>>> testing). >>>>> #mode = generator >>>>> >>>>> # The start time. Format is YYYY-mm-ddTHH:MM. If not specified, >>>>> the default >>>>> # is to use the present time. >>>>> #start = 2011-01-01T00:00 >>>>> >>>>> # The driver to use: >>>>> driver = weewx.drivers.simulator >>>>> >>>>> >>>>> ############################################################################## >>>>> >>>>> # This section is for uploading data to Internet sites >>>>> >>>>> [StdRESTful] >>>>> >>>>> [[StationRegistry]] >>>>> # To register this weather station with weewx, set this to true >>>>> register_this_station = true >>>>> >>>>> [[AWEKAS]] >>>>> # This section is for configuring posts to AWEKAS. >>>>> >>>>> # If you wish to do this, set the option 'enable' to true, >>>>> # and specify a username and password. >>>>> # To guard against parsing errors, put the password in quotes. >>>>> enable = false >>>>> username = replace_me >>>>> password = replace_me >>>>> >>>>> [[CWOP]] >>>>> # This section is for configuring posts to CWOP. >>>>> >>>>> # If you wish to do this, set the option 'enable' to true, >>>>> # and specify the station ID (e.g., CW1234). >>>>> enable = false >>>>> station = replace_me >>>>> >>>>> # If this is an APRS (radio amateur) station, uncomment >>>>> # the following and replace with a passcode (e.g., 12345). >>>>> #passcode = replace_me (APRS stations only) >>>>> >>>>> [[PWSweather]] >>>>> # This section is for configuring posts to PWSweather.com. >>>>> >>>>> # If you wish to do this, set the option 'enable' to true, >>>>> # and specify a station and password. >>>>> # To guard against parsing errors, put the password in quotes. >>>>> enable = false >>>>> station = replace_me >>>>> password = replace_me >>>>> >>>>> [[WOW]] >>>>> # This section is for configuring posts to WOW. >>>>> >>>>> # If you wish to do this, set the option 'enable' to true, >>>>> # and specify a station and password. >>>>> # To guard against parsing errors, put the password in quotes. >>>>> enable = false >>>>> station = replace_me >>>>> password = replace_me >>>>> >>>>> [[Wunderground]] >>>>> # This section is for configuring posts to the Weather >>>>> Underground. >>>>> >>>>> # If you wish to do this, set the option 'enable' to true, >>>>> # and specify a station (e.g., 'KORHOODR3') and password. >>>>> # To guard against parsing errors, put the password in quotes. >>>>> enable = false >>>>> station = replace_me >>>>> password = replace_me >>>>> >>>>> # If you plan on using wunderfixer, set the following >>>>> # to your API key: >>>>> api_key = replace_me >>>>> >>>>> # Set the following to True to have weewx use the WU >>>>> "Rapidfire" >>>>> # protocol. Not all hardware can support it. See the User's >>>>> Guide. >>>>> rapidfire = False >>>>> >>>>> >>>>> ############################################################################## >>>>> >>>>> # This section specifies what reports, using which skins, to >>>>> generate. >>>>> >>>>> [StdReport] >>>>> >>>>> # Where the skins reside, relative to WEEWX_ROOT >>>>> SKIN_ROOT = skins >>>>> >>>>> # Where the generated reports should go, relative to WEEWX_ROOT >>>>> HTML_ROOT = public_html >>>>> >>>>> # The database binding indicates which data should be used in >>>>> reports. >>>>> data_binding = wx_binding >>>>> >>>>> # Whether to log a successful operation >>>>> log_success = True >>>>> >>>>> # Whether to log an unsuccessful operation >>>>> log_failure = False >>>>> >>>>> # Each of the following subsections defines a report that will be >>>>> run. >>>>> # See the customizing guide to change the units, plot types and >>>>> line >>>>> # colors, modify the fonts, display additional sensor data, and >>>>> other >>>>> # customizations. Many of those changes can be made here by >>>>> overriding >>>>> # parameters, or by modifying templates within the skin itself. >>>>> >>>>> [[SeasonsReport]] >>>>> # The SeasonsReport uses the 'Seasons' skin, which contains the >>>>> # images, templates and plots for the report. >>>>> skin = Seasons >>>>> enable = true >>>>> >>>>> [[SmartphoneReport]] >>>>> # The SmartphoneReport uses the 'Smartphone' skin, and the >>>>> images and >>>>> # files are placed in a dedicated subdirectory. >>>>> skin = Smartphone >>>>> enable = true >>>>> HTML_ROOT = public_html/smartphone >>>>> >>>>> [[MobileReport]] >>>>> # The MobileReport uses the 'Mobile' skin, and the images and >>>>> files >>>>> # are placed in a dedicated subdirectory. >>>>> skin = Mobile >>>>> enable = true >>>>> HTML_ROOT = public_html/mobile >>>>> >>>>> [[StandardReport]] >>>>> # This is the old "Standard" skin. By default, it is not >>>>> enabled. >>>>> skin = Standard >>>>> enable = false >>>>> >>>>> [[FTP]] >>>>> # FTP'ing the results to a webserver is treated as just >>>>> another report, >>>>> # albeit one with an unusual report generator! >>>>> skin = Ftp >>>>> >>>>> # If you wish to use FTP, set "enable" to "true", then >>>>> # fill out the next four lines. >>>>> # Use quotes around passwords to guard against parsing errors. >>>>> enable = false >>>>> user = replace_me >>>>> password = replace_me >>>>> server = replace_me # The ftp server name, e.g, >>>>> www.myserver.org >>>>> path = replace_me # The destination directory, e.g., >>>>> /weather >>>>> >>>>> # Set to True for an FTP over TLS (FTPS) connection. Not all >>>>> servers >>>>> # support this. >>>>> secure_ftp = False >>>>> >>>>> # To upload files from something other than what HTML_ROOT is >>>>> set >>>>> # to above, specify a different HTML_ROOT here. >>>>> #HTML_ROOT = public_html >>>>> >>>>> # Most FTP servers use port 21 >>>>> port = 21 >>>>> >>>>> # Set to 1 to use passive mode, zero for active mode >>>>> passive = 1 >>>>> >>>>> [[RSYNC]] >>>>> # rsync'ing to a webserver is treated as just another report >>>>> skin = Rsync >>>>> >>>>> # If you wish to use rsync, you must configure passwordless >>>>> ssh using >>>>> # public/private key authentication from the user account that >>>>> weewx >>>>> # runs to the user account on the remote machine where the >>>>> files >>>>> # will be copied. >>>>> # >>>>> # If you wish to use rsync, set "enable" to "true", then >>>>> # fill out server, user, and path. >>>>> # The server should appear in your .ssh/config file. >>>>> # The user is the username used in the identity file. >>>>> # The path is the destination directory, such as >>>>> /var/www/html/weather. >>>>> # Be sure that the user has write permissions on the >>>>> destination! >>>>> enable = false >>>>> server = replace_me >>>>> user = replace_me >>>>> path = replace_me >>>>> >>>>> # To upload files from something other than what HTML_ROOT is >>>>> set >>>>> # to above, specify a different HTML_ROOT here. >>>>> #HTML_ROOT = public_html >>>>> >>>>> # Rsync can be configured to remove files from the remote >>>>> server if >>>>> # they don't exist under HTML_ROOT locally. USE WITH CAUTION: >>>>> if you >>>>> # make a mistake in the remote path, you could could >>>>> unintentionally >>>>> # cause unrelated files to be deleted. Set to 1 to enable >>>>> remote file >>>>> # deletion, zero to allow files to accumulate remotely. >>>>> delete = 0 >>>>> >>>>> #### >>>>> >>>>> # Various options for customizing your reports. >>>>> >>>>> [[Defaults]] >>>>> >>>>> [[[Units]]] >>>>> >>>>> # The following section sets what unit to use for each >>>>> unit group. >>>>> # NB: The unit is always in the singular. I.e., >>>>> 'mile_per_hour', >>>>> # NOT 'miles_per_hour' >>>>> [[[[Groups]]]] >>>>> >>>>> group_altitude = foot # Options are 'foot' or >>>>> 'meter' >>>>> group_degree_day = degree_F_day # Options are >>>>> 'degree_F_day' or 'degree_C_day' >>>>> group_distance = mile # Options are 'mile' or 'km' >>>>> group_pressure = inHg # Options are 'inHg', 'mmHg', >>>>> 'mbar', or 'hPa' >>>>> group_rain = inch # Options are 'inch', 'cm', or >>>>> 'mm' >>>>> group_rainrate = inch_per_hour # Options are >>>>> 'inch_per_hour', 'cm_per_hour', or 'mm_per_hour' >>>>> group_speed = mile_per_hour # Options are >>>>> 'mile_per_hour', 'km_per_hour', 'knot', or 'meter_per_second' >>>>> group_speed2 = mile_per_hour2 # Options are >>>>> 'mile_per_hour2', 'km_per_hour2', 'knot2', or 'meter_per_second2' >>>>> group_temperature = degree_F # Options are >>>>> 'degree_F' or 'degree_C' >>>>> >>>>> # The following section sets the formatting for each type >>>>> of unit. >>>>> [[[[StringFormats]]]] >>>>> >>>>> centibar = %.0f >>>>> cm = %.2f >>>>> cm_per_hour = %.2f >>>>> degree_C = %.1f >>>>> degree_F = %.1f >>>>> degree_compass = %.0f >>>>> foot = %.0f >>>>> hPa = %.1f >>>>> hour = %.1f >>>>> inHg = %.3f >>>>> inch = %.2f >>>>> inch_per_hour = %.2f >>>>> km = %.1f >>>>> km_per_hour = %.0f >>>>> km_per_hour2 = %.1f >>>>> knot = %.0f >>>>> knot2 = %.1f >>>>> mbar = %.1f >>>>> meter = %.0f >>>>> meter_per_second = %.1f >>>>> meter_per_second2 = %.1f >>>>> mile = %.1f >>>>> mile_per_hour = %.0f >>>>> mile_per_hour2 = %.1f >>>>> mm = %.1f >>>>> mmHg = %.1f >>>>> mm_per_hour = %.1f >>>>> percent = %.0f >>>>> second = %.0f >>>>> uv_index = %.1f >>>>> volt = %.1f >>>>> watt_per_meter_squared = %.0f >>>>> NONE = " N/A" >>>>> >>>>> # The following section overrides the label used for each >>>>> type of unit >>>>> [[[[Labels]]]] >>>>> >>>>> meter = " meter", " meters" # You may prefer >>>>> "metre". >>>>> day = " day", " days" >>>>> hour = " hour", " hours" >>>>> minute = " minute", " minutes" >>>>> second = " second", " seconds" >>>>> NONE = "" >>>>> >>>>> # The following section sets the format for each time >>>>> scale. >>>>> # The values below will work in every locale, but they may >>>>> not look >>>>> # particularly attractive. >>>>> [[[[TimeFormats]]]] >>>>> >>>>> hour = %H:%M >>>>> day = %X >>>>> week = %X (%A) >>>>> month = %x %X >>>>> year = %x %X >>>>> rainyear = %x %X >>>>> current = %x %X >>>>> ephem_day = %X >>>>> ephem_year = %x %X >>>>> >>>>> [[[[Ordinates]]]] >>>>> >>>>> # Ordinal directions. The last one is for no wind >>>>> direction >>>>> directions = N, NNE, NE, ENE, E, ESE, SE, SSE, S, SSW, >>>>> SW, WSW, W, WNW, NW, NNW, N/A >>>>> >>>>> # The following section sets the base temperatures used >>>>> for the >>>>> # calculation of heating, cooling, and growing >>>>> degree-days. >>>>> [[[[DegreeDays]]]] >>>>> >>>>> # Base temperature for heating days, with unit: >>>>> heating_base = 65, degree_F >>>>> # Base temperature for cooling days, with unit: >>>>> cooling_base = 65, degree_F >>>>> # Base temperature for growing days, with unit: >>>>> growing_base = 50, degree_F >>>>> >>>>> # A trend takes a difference across a time period. The >>>>> following >>>>> # section sets the time period, and how big an error is >>>>> allowed to >>>>> # still be counted as the start or end of a period. >>>>> [[[[Trend]]]] >>>>> >>>>> time_delta = 10800 # 3 hours >>>>> time_grace = 300 # 5 minutes >>>>> >>>>> # The labels to be used for each observation type >>>>> [[[Labels]]] >>>>> >>>>> # Set to hemisphere abbreviations suitable for your >>>>> location: >>>>> hemispheres = N, S, E, W >>>>> >>>>> # Formats to be used for latitude whole degrees, longitude >>>>> whole >>>>> # degrees, and minutes: >>>>> latlon_formats = %02d, %03d, %05.2f >>>>> >>>>> # Generic labels, keyed by an observation type. >>>>> [[[[Generic]]]] >>>>> barometer = Barometer >>>>> dewpoint = Dew Point >>>>> ET = ET >>>>> heatindex = Heat Index >>>>> inHumidity = Inside Humidity >>>>> inTemp = Inside Temperature >>>>> outHumidity = Humidity >>>>> outTemp = Outside Temperature >>>>> radiation = Radiation >>>>> rain = Rain >>>>> rainRate = Rain Rate >>>>> UV = UV Index >>>>> windDir = Wind Direction >>>>> windGust = Gust Speed >>>>> windGustDir = Gust Direction >>>>> windSpeed = Wind Speed >>>>> windchill = Wind Chill >>>>> windgustvec = Gust Vector >>>>> windvec = Wind Vector >>>>> extraTemp1 = Temperature1 >>>>> extraTemp2 = Temperature2 >>>>> extraTemp3 = Temperature3 >>>>> >>>>> # Sensor status indicators >>>>> >>>>> rxCheckPercent = Signal Quality >>>>> txBatteryStatus = Transmitter Battery >>>>> windBatteryStatus = Wind Battery >>>>> rainBatteryStatus = Rain Battery >>>>> outTempBatteryStatus = Outside Temperature Battery >>>>> inTempBatteryStatus = Inside Temperature Battery >>>>> consBatteryVoltage = Console Battery >>>>> heatingVoltage = Heating Battery >>>>> supplyVoltage = Supply Voltage >>>>> referenceVoltage = Reference Voltage >>>>> >>>>> [[[Almanac]]] >>>>> >>>>> # The labels to be used for the phases of the moon: >>>>> moon_phases = New, Waxing crescent, First quarter, Waxing >>>>> gibbous, Full, Waning gibbous, Last quarter, Waning crescent >>>>> >>>>> >>>>> ############################################################################## >>>>> >>>>> # This service acts as a filter, converting the unit system coming >>>>> from >>>>> # the hardware to a unit system in the database. >>>>> >>>>> [StdConvert] >>>>> >>>>> # The target_unit affects only the unit system in the database. >>>>> Once >>>>> # chosen it cannot be changed without converting the entire >>>>> database. >>>>> # Modification of target_unit after starting weewx will result in >>>>> # corrupt data - the database will contain a mix of US and METRIC >>>>> data. >>>>> # >>>>> # The value of target_unit does not affect the unit system for >>>>> # reporting - reports can display US, Metric, or any combination >>>>> of units. >>>>> # >>>>> # In most cases, target_unit should be left as the default: US >>>>> # >>>>> # In particular, those migrating from a standard wview installation >>>>> # should use US since that is what the wview database contains. >>>>> >>>>> # DO NOT MODIFY THIS VALUE UNLESS YOU KNOW WHAT YOU ARE DOING! >>>>> target_unit = US # Options are 'US', 'METRICWX', or 'METRIC' >>>>> >>>>> >>>>> ############################################################################## >>>>> >>>>> # This section can adjust data using calibration expressions. >>>>> >>>>> [StdCalibrate] >>>>> >>>>> [[Corrections]] >>>>> # For each type, an arbitrary calibration expression can be >>>>> given. >>>>> # It should be in the units defined in the StdConvert section. >>>>> # Example: >>>>> foo = foo + 0.2 >>>>> >>>>> >>>>> ############################################################################## >>>>> >>>>> # This section is for quality control checks. If units are not >>>>> specified, >>>>> # values must be in the units defined in the StdConvert section. >>>>> >>>>> [StdQC] >>>>> >>>>> [[MinMax]] >>>>> barometer = 26, 32.5, inHg >>>>> pressure = 24, 34.5, inHg >>>>> outTemp = -40, 120, degree_F >>>>> inTemp = 10, 120, degree_F >>>>> outHumidity = 0, 100 >>>>> inHumidity = 0, 100 >>>>> windSpeed = 0, 120, mile_per_hour >>>>> rain = 0, 10, inch >>>>> >>>>> >>>>> ############################################################################## >>>>> >>>>> # This section controls the origin of derived values. >>>>> >>>>> [StdWXCalculate] >>>>> >>>>> [[Calculations]] >>>>> # How to calculate derived quantities. Possible values are: >>>>> # hardware - use the value provided by hardware >>>>> # software - use the value calculated by weewx >>>>> # prefer_hardware - use value provide by hardware if >>>>> available, >>>>> # otherwise use value calculated by weewx >>>>> >>>>> pressure = prefer_hardware >>>>> altimeter = prefer_hardware >>>>> appTemp = prefer_hardware >>>>> barometer = prefer_hardware >>>>> beaufort = prefer_hardware >>>>> cloudbase = prefer_hardware >>>>> dewpoint = prefer_hardware >>>>> ET = prefer_hardware >>>>> heatindex = prefer_hardware >>>>> humidex = prefer_hardware >>>>> inDewpoint = prefer_hardware >>>>> maxSolarRad = prefer_hardware >>>>> rainRate = prefer_hardware >>>>> windchill = prefer_hardware >>>>> windrun = prefer_hardware >>>>> >>>>> >>>>> ############################################################################## >>>>> >>>>> # For hardware that supports it, this section controls how often the >>>>> # onboard clock gets updated. >>>>> >>>>> [StdTimeSynch] >>>>> >>>>> # How often to check the weather station clock for drift (in >>>>> seconds) >>>>> clock_check = 14400 >>>>> >>>>> # How much it can drift before we will correct it (in seconds) >>>>> max_drift = 5 >>>>> >>>>> >>>>> ############################################################################## >>>>> >>>>> # This section is for configuring the archive service. >>>>> >>>>> [StdArchive] >>>>> >>>>> # If the station hardware supports data logging then the archive >>>>> interval >>>>> # will be downloaded from the station. Otherwise, specify it (in >>>>> seconds). >>>>> archive_interval = 300 >>>>> >>>>> # If possible, new archive records are downloaded from the station >>>>> # hardware. If the hardware does not support this, then new archive >>>>> # records will be generated in software. >>>>> # Set the following to "software" to force software record >>>>> generation. >>>>> record_generation = hardware >>>>> >>>>> # Whether to include LOOP data in hi/low statistics >>>>> loop_hilo = True >>>>> >>>>> # The data binding used to save archive records >>>>> data_binding = wx_binding >>>>> >>>>> >>>>> ############################################################################## >>>>> >>>>> # This section binds a data store to a database. >>>>> >>>>> [DataBindings] >>>>> >>>>> [[wx_binding]] >>>>> # The database must match one of the sections in [Databases]. >>>>> # This is likely to be the only option you would want to >>>>> change. >>>>> database = archive_sqlite >>>>> # The name of the table within the database >>>>> table_name = archive >>>>> # The manager handles aggregation of data for historical >>>>> summaries >>>>> manager = weewx.manager.DaySummaryManager >>>>> # The schema defines the structure of the database. >>>>> # It is *only* used when the database is created. >>>>> schema = schemas.wview_extended.schema >>>>> >>>>> >>>>> ############################################################################## >>>>> >>>>> # This section defines various databases. >>>>> >>>>> [Databases] >>>>> >>>>> # A SQLite database is simply a single file >>>>> [[archive_sqlite]] >>>>> database_name = weewx.sdb >>>>> database_type = SQLite >>>>> >>>>> # MySQL >>>>> [[archive_mysql]] >>>>> database_name = weewx >>>>> database_type = MySQL >>>>> >>>>> >>>>> ############################################################################## >>>>> >>>>> # This section defines defaults for the different types of databases. >>>>> >>>>> [DatabaseTypes] >>>>> >>>>> # Defaults for SQLite databases >>>>> [[SQLite]] >>>>> driver = weedb.sqlite >>>>> # Directory in which the database files are located >>>>> SQLITE_ROOT = %(WEEWX_ROOT)s/archive >>>>> >>>>> # Defaults for MySQL databases >>>>> [[MySQL]] >>>>> driver = weedb.mysql >>>>> # The host where the database is located >>>>> host = localhost >>>>> # The user name for logging in to the host >>>>> user = weewx >>>>> # The password for the user name (quotes guard against parsing >>>>> errors) >>>>> password = weewx >>>>> >>>>> >>>>> ############################################################################## >>>>> >>>>> # This section configures the internal weewx engine. >>>>> >>>>> [Engine] >>>>> >>>>> [[Services]] >>>>> # This section specifies the services that should be run. They >>>>> are >>>>> # grouped by type, and the order of services within each group >>>>> # determines the order in which the services will be run. >>>>> prep_services = weewx.engine.StdTimeSynch >>>>> data_services = >>>>> weewx.extra_sensors_service.ExtraSensorsService, >>>>> process_services = weewx.engine.StdConvert, >>>>> weewx.engine.StdCalibrate, weewx.engine.StdQC, >>>>> weewx.wxservices.StdWXCalculate >>>>> archive_services = weewx.engine.StdArchive >>>>> restful_services = weewx.restx.StdStationRegistry, >>>>> weewx.restx.StdWunderground, weewx.restx.StdPWSweather, >>>>> weewx.restx.StdCWOP, weewx.restx.StdWOW, weewx.restx.StdAWEKAS >>>>> report_services = weewx.engine.StdPrint, weewx.engine.StdReport >>>>> >>>>> ---------------------------- >>>>> Any other files needed for review? >>>>> >>>>> Suggestions on where to go from here - >>>>> >>>>> -- >>>>> You received this message because you are subscribed to the Google >>>>> Groups "weewx-user" group. >>>>> To unsubscribe from this group and stop receiving emails from it, send >>>>> an email to [email protected]. >>>>> To view this discussion on the web visit >>>>> https://groups.google.com/d/msgid/weewx-user/ed9310a5-e26b-41a1-aafb-a69acbe4dac2o%40googlegroups.com >>>>> <https://groups.google.com/d/msgid/weewx-user/ed9310a5-e26b-41a1-aafb-a69acbe4dac2o%40googlegroups.com?utm_medium=email&utm_source=footer> >>>>> . >>>>> >>>> -- >>>> You received this message because you are subscribed to a topic in the >>>> Google Groups "weewx-user" group. >>>> To unsubscribe from this topic, visit >>>> https://groups.google.com/d/topic/weewx-user/C-0asA4tQpY/unsubscribe. >>>> To unsubscribe from this group and all its topics, send an email to >>>> [email protected]. >>>> To view this discussion on the web visit >>>> https://groups.google.com/d/msgid/weewx-user/CAPq0zEDfefSpw2CTCCE%3DrcYUWFGfHDHSi0Uekzw4NZPLM9e04w%40mail.gmail.com >>>> <https://groups.google.com/d/msgid/weewx-user/CAPq0zEDfefSpw2CTCCE%3DrcYUWFGfHDHSi0Uekzw4NZPLM9e04w%40mail.gmail.com?utm_medium=email&utm_source=footer> >>>> . >>>> >>> -- >> You received this message because you are subscribed to the Google Groups >> "weewx-user" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/weewx-user/d152f443-e4e1-423d-b937-cbf53560dddao%40googlegroups.com >> <https://groups.google.com/d/msgid/weewx-user/d152f443-e4e1-423d-b937-cbf53560dddao%40googlegroups.com?utm_medium=email&utm_source=footer> >> . >> > -- > You received this message because you are subscribed to a topic in the > Google Groups "weewx-user" group. > To unsubscribe from this topic, visit > https://groups.google.com/d/topic/weewx-user/C-0asA4tQpY/unsubscribe. > To unsubscribe from this group and all its topics, send an email to > [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/weewx-user/CAPq0zEBWR7SmrZ_2j5M%3DC%3DiJk6%2BeY43NnZE5Hrdc%3DNmHym4t3w%40mail.gmail.com > <https://groups.google.com/d/msgid/weewx-user/CAPq0zEBWR7SmrZ_2j5M%3DC%3DiJk6%2BeY43NnZE5Hrdc%3DNmHym4t3w%40mail.gmail.com?utm_medium=email&utm_source=footer> > . > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/CAJBcQpVqrRSg1V6c_NoF-CTZzBVXmZPecsK24kRk%3DN%2BydiMc6Q%40mail.gmail.com.
