OK, I also have the Seasons and Belchertown skin installed as well as my own Weather34.
I would go ahead and install Apache2, PHP7.x and the PHP libraries. When you install the libraries you should pick up things like curl along the way. Then install Weather34 following the instructions carefully. Belchertown is also very well documented and is straightforward to install. Some people have a problem setting up MQTT but again I found it straight forward to setup my own server on my own Pi. There is excellent support from Pat and Belchertown users if you get into trouble. IM On Sun, 6 Sep 2020 at 14:44, ExprmntAl <[email protected]> wrote: > Ian, I should have noted that I'm running on a Raspberry Pi 4 with the > full version of the Raspberry Pi OS. Weewx has been running fine for over > a month using the weatherflow extension (Tempest). At this point I haven't > installed anything else and have been using the seasons skin. I wanted to > start playing around with Belchertown and Weather34 now that I have gotten > my feet wet. > > I had tried the "php -v" command already but it did not work and returned > "command not found". Here is what I get when I run the two commands: > > *pi@raspberrypi:~ $ apachectl -v* > *bash: apachectl: command not found* > *pi@raspberrypi:~ $ sudo apachectl -v* > *sudo: apachectl: command not found* > *pi@raspberrypi:~ $ php -v* > *bash: php: command not found* > *pi@raspberrypi:~ $ sudo php -v* > *sudo: php: command not found* > *pi@raspberrypi:~ $ * > > Also, what about curl? > > > On Sunday, September 6, 2020 at 1:26:30 AM UTC-5 [email protected] wrote: > >> To determine the versions of Apache and PHP installed: - >> >> From the command line run: - >> >> apachectl -v >> php -v >> >> >> IM >> >> >> >> On Sun, 6 Sep 2020 at 07:07, steeple ian <[email protected]> wrote: >> >>> Hi, >>> I assume you are running a Debian based OS, Raspberry Pi OS or Ubuntu >>> perhaps? >>> IM >>> >>> On Sun, 6 Sep 2020 at 05:14, ExprmntAl <[email protected]> wrote: >>> >>>> In the installation instructions for weewx-Weather34 it says: >>>> >>>> *"This installation guide assumes that you are already reasonably >>>> familiar with WeeWX and that it is already installed on your computer along >>>> with a webserver, php and curl."* >>>> >>>> The Apache2 webserver is installed as part of the weewx installation, >>>> but how do I know if php and curl are installed? Is there an easy way to >>>> check this? If I don't have these what is the best way to install them? >>>> >>>> Also, later in the instation instructions it says: >>>> >>>> *"IMPORTANT. After installing PHP please make sure you install all the >>>> PHP modules appropriate for your version of PHP. Failure to due so may mean >>>> that forecasts and current conditions fail to update. This is an example >>>> for PHP7.3 modules on a Debian based distribution: -* >>>> >>>> >>>> >>>> >>>> >>>> >>>> *sudo apt-get install php-cli php-fpm php-json php-sqlite3 php-zip >>>> php-gd php-mbstring php-curl php-xml php-pear php-bcmathsudo apt-get >>>> install libapache2-mod-phpsudo a2enmod php7.3sudo systemctl restart >>>> apache2"* >>>> >>>> How do I determine what version of PHP I have and once I know that, how >>>> do I ensure that I have installed the right modules for that version? I >>>> did the "Debian based distribution" when I installed weewx. >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> -- >>>> >>>> >>>> You received this message because you are subscribed to the Google >>>> Groups "weewx-user" group. >>>> >>>> >>>> To unsubscribe from this group and stop receiving emails from it, send >>>> an email to [email protected]. >>>> >>>> >>>> To view this discussion on the web visit >>>> https://groups.google.com/d/msgid/weewx-user/45e32d75-b870-4ab3-9c2c-4bec28a611b7n%40googlegroups.com >>>> <https://groups.google.com/d/msgid/weewx-user/45e32d75-b870-4ab3-9c2c-4bec28a611b7n%40googlegroups.com?utm_medium=email&utm_source=footer> >>>> . >>>> >>>> >>>> >>> >>> >> >> > > > > > > > > -- > > > You received this message because you are subscribed to the Google Groups > "weewx-user" group. > > > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > > > To view this discussion on the web visit > https://groups.google.com/d/msgid/weewx-user/ba11cac0-a789-41ac-b017-c56065b03986n%40googlegroups.com > <https://groups.google.com/d/msgid/weewx-user/ba11cac0-a789-41ac-b017-c56065b03986n%40googlegroups.com?utm_medium=email&utm_source=footer> > . > > > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/CADASSaQMk7wHfdrNwFxEzo_CGYt3a4TRxEcuBN7fST1aLg2FSg%40mail.gmail.com.
