You missed the early parts of the startup, when it would tell us what version of Python is being used.
It's OK to use tail -f, but you've got to use it *before* starting up weewxd, not afterwards. -tk On Tue, Sep 8, 2020 at 5:11 PM ExprmntAl <[email protected]> wrote: > Ok TK, here is the Syslog with Debug = 1 from startup through the first > reporting cycle. > > *pi@raspberrypi:~ $ sudo /etc/init.d/weewx stop* > *[ ok ] Stopping weewx (via systemctl): weewx.service.* > *pi@raspberrypi:~ $ sudo /etc/init.d/weewx start* > *[ ok ] Starting weewx (via systemctl): weewx.service.* > *pi@raspberrypi:~ $ tail -f /var/log/syslog* > *Sep 8 19:04:13 raspberrypi weewx[15908] DEBUG weewx.engine: Loading > service weewx.engine.StdPrint* > *Sep 8 19:04:13 raspberrypi weewx[15908] DEBUG weewx.engine: Finished > loading service weewx.engine.StdPrint* > *Sep 8 19:04:13 raspberrypi weewx[15908] DEBUG weewx.engine: Loading > service weewx.engine.StdReport* > *Sep 8 19:04:13 raspberrypi weewx[15908] DEBUG weewx.engine: Finished > loading service weewx.engine.StdReport* > *Sep 8 19:04:13 raspberrypi weewx[15908] INFO __main__: Starting up weewx > version 4.1.1* > *Sep 8 19:04:13 raspberrypi weewx[15908] DEBUG weewx.engine: Station does > not support reading the time* > *Sep 8 19:04:13 raspberrypi weewx[15908] INFO weewx.engine: Using binding > 'wx_binding' to database 'weewx.sdb'* > *Sep 8 19:04:13 raspberrypi weewx[15908] INFO weewx.manager: Starting > backfill of daily summaries* > *Sep 8 19:04:13 raspberrypi weewx[15908] INFO weewx.engine: Starting main > packet loop.* > *Sep 8 19:04:13 raspberrypi /weewxd: weatherflowudp: MainThread: > Listening for UDP broadcasts to IP address <broadcast> on port 50222, with > timeout 90 and share_socket True...* > *Sep 8 19:04:40 raspberrypi dhcpcd[410]: wlan0: Router Advertisement from > fe80::9610:3eff:fe86:b14b* > *Sep 8 19:05:26 raspberrypi weewx[15908] INFO weewx.manager: Added record > 2020-09-08 19:05:00 CDT (1599609900) to database 'weewx.sdb'* > *Sep 8 19:05:26 raspberrypi weewx[15908] INFO weewx.manager: Added record > 2020-09-08 19:05:00 CDT (1599609900) to daily summary in 'weewx.sdb'* > *Sep 8 19:05:27 raspberrypi weewx[15908] DEBUG weewx.reportengine: > Running reports for latest time in the database.* > *Sep 8 19:05:27 raspberrypi /weewxd: weatherflowudp: MainThread: > Listening for UDP broadcasts to IP address <broadcast> on port 50222, with > timeout 90 and share_socket True...* > *Sep 8 19:05:27 raspberrypi weewx[15908] DEBUG weewx.reportengine: > Running report 'SeasonsReport'* > *Sep 8 19:05:27 raspberrypi weewx[15908] DEBUG weewx.reportengine: Found > configuration file /etc/weewx/skins/Seasons/skin.conf for report > 'SeasonsReport'* > *Sep 8 19:05:27 raspberrypi weewx[15908] DEBUG weewx.cheetahgenerator: > Using search list ['weewx.cheetahgenerator.Almanac', > 'weewx.cheetahgenerator.Station', 'weewx.cheetahgenerator.Current', > 'weewx.cheetahgenerator.Stats', 'weewx.cheetahgenerator.UnitInfo', > 'weewx.cheetahgenerator.Extras']* > *Sep 8 19:05:27 raspberrypi weewx[15908] DEBUG weewx.manager: Daily > summary version is 2.0* > *Sep 8 19:05:29 raspberrypi weewx[15908] INFO weewx.cheetahgenerator: > Generated 8 files for report SeasonsReport in 1.94 seconds* > *Sep 8 19:05:29 raspberrypi weewx[15908] DEBUG weewx.manager: Daily > summary version is 2.0* > *Sep 8 19:05:31 raspberrypi weewx[15908] INFO weewx.imagegenerator: > Generated 30 images for report SeasonsReport in 2.72 seconds* > *Sep 8 19:05:31 raspberrypi weewx[15908] INFO weewx.reportengine: Copied > 5 files to /var/www/html/weewx* > *Sep 8 19:05:31 raspberrypi weewx[15908] DEBUG weewx.reportengine: Report > 'SmartphoneReport' not enabled. Skipping.* > *Sep 8 19:05:31 raspberrypi weewx[15908] DEBUG weewx.reportengine: Report > 'MobileReport' not enabled. Skipping.* > *Sep 8 19:05:31 raspberrypi weewx[15908] DEBUG weewx.reportengine: Report > 'StandardReport' not enabled. Skipping.* > *Sep 8 19:05:31 raspberrypi weewx[15908] DEBUG weewx.reportengine: Report > 'FTP' not enabled. Skipping.* > *Sep 8 19:05:31 raspberrypi weewx[15908] DEBUG weewx.reportengine: Report > 'RSYNC' not enabled. Skipping.* > *Sep 8 19:06:11 raspberrypi dhcpcd[410]: wlan0: Router Advertisement from > fe80::9610:3eff:fe86:b14b* > > On Tuesday, September 8, 2020 at 5:29:17 PM UTC-5 [email protected] wrote: > >> Maybe. Mr AI's response shows that configobj was installed for python 3, >> but not necessarily python 2. And... we don't know what version of python >> is being used, because we have not seen a log. >> >> Stop weewxd, set debug=1, restart weewxd. Post the log from startup >> through the first reporting cycle. >> >> -tk >> >> On Tue, Sep 8, 2020 at 1:08 PM vince <[email protected]> wrote: >> >>> On Tuesday, September 8, 2020 at 12:50:16 PM UTC-7, ExprmntAl wrote: >>>> >>>> OK Vince, thanks for helping me. Here is what I got. >>>> >>>> *pi@raspberrypi:~ $ dpkg -l | grep -i configobj* >>>> *ii python3-configobj 5.0.6-3 >>>> all simple but powerful config file reader and writer >>>> for Python 3* >>>> *pi@raspberrypi:~ $ pip list | grep -i configobj* >>>> *configobj 5.0.6* >>>> *WARNING: You are using pip version 20.2.2; however, version 20.2.3 is >>>> available.* >>>> *You should consider upgrading via the '/usr/bin/python3 -m pip install >>>> --upgrade pip' command.* >>>> *pi@raspberrypi:~ $ pip3 list | grep -i configobj* >>>> *configobj 5.0.6* >>>> *WARNING: You are using pip version 20.2.2; however, version 20.2.3 is >>>> available.* >>>> >>> >>> >>> wow - you have it from a package (python3), from pip (python3), and from >>> pip (python2) >>> >>> So it's definitely there....meaning it's a weather34 thing I *think* at >>> this point. >>> >>>> *You should consider upgrading via the '/usr/bin/python3 -m pip install >>>> --upgrade pip' command.* >>>> *pi@raspberrypi:~ $* >>>> >>>> On Tuesday, September 8, 2020 at 11:58:02 AM UTC-5 vince wrote: >>>> >>>>> On Tuesday, September 8, 2020 at 3:50:22 AM UTC-7, ExprmntAl wrote: >>>>> >>>>>> How can I determine that "configobj" is installed normally? >>>>>> >>>>>> >>>>> It could have been installed via dpkg or pip or pip3, and you might >>>>> have python2 'and' python3 installed on your system, so you need to check >>>>> 3 >>>>> ways. >>>>> >>>>> dpkg -l | grep -i configobj >>>>> pip list | grep -i configobj >>>>> pip3 list | grep -i configobj >>>>> >>>>> You need configobj to be installed to match up with the python your >>>>> weewx (and perhaps the extension) use. >>>>> >>>>> -- >>> You received this message because you are subscribed to the Google >>> Groups "weewx-user" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to [email protected]. >>> >> To view this discussion on the web visit >>> https://groups.google.com/d/msgid/weewx-user/f75dc873-f9c9-4531-b28a-891e6c085be4o%40googlegroups.com >>> <https://groups.google.com/d/msgid/weewx-user/f75dc873-f9c9-4531-b28a-891e6c085be4o%40googlegroups.com?utm_medium=email&utm_source=footer> >>> . >>> >> -- > You received this message because you are subscribed to the Google Groups > "weewx-user" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/weewx-user/aacc10fc-e3b3-47e5-b148-f7907750b7bcn%40googlegroups.com > <https://groups.google.com/d/msgid/weewx-user/aacc10fc-e3b3-47e5-b148-f7907750b7bcn%40googlegroups.com?utm_medium=email&utm_source=footer> > . > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/CAPq0zEDKdwRVt_j6uEf1rYAc1795t5xFeBeqxEYxO0vvG%2BibNw%40mail.gmail.com.
