Attached are a debug log and the syslog from the weewx start up. It pulls
the records from the Davis and uploads them to Wunderground, but never puts
anything in the database. I've used the wunderground utilitiy to pull the
last 3 years of data from wunderground and put it into the database, but no
new data will go from the davis into the database. I've also deleted the
database and used the we_database utilitiy to create a new weewx database.
Still nothing being added to the database. No indication of any errors
that I can see.
Jeff...
On Wednesday, September 9, 2020 at 10:07:40 AM UTC-4 [email protected] wrote:
> No log... hard to say much.
>
> On Wed, Sep 9, 2020 at 6:41 AM VE4PER / Andy <[email protected]>
> wrote:
>
>> I noticed similar situation with mine also. Except I discovered it in
>> message in Acurite 1035 Display Unit ticker window "Data Logger Full Please
>> Connect to PC to Transfer Data" . I assumed USB connection was hung up for
>> some reason and did full PC restart and Display Unit Reset; just waiting to
>> see if error returns. Current data transfers via ftp etc appear to be
>> getting sent to AWEKAS, CWOP, WeatherUnderground and personal website OK
>> (ftp).
>>
>> Platform is linux ubuntustudio 20.04 LTS and database is MariaDB also.
>>
>> cheers ,73 & Gud DX
>>
>>
>> On 2020-09-09 8:22 a.m., [email protected] wrote:
>>
>> I've been running Weewx for about 6 years now on a Raspberry Pi and
>> storing data in a MariaDB database. My Pi died about a month ago. I
>> though it was the Pi itself, but it turned out to be the SD card. Set up a
>> new Pi 3 and configured it to send data to the MariaDB, however after a
>> little testing I noticed that Weewx stopped recording data in the database
>> in 2017 and still isn't inserting data. I used the utilities and pulled
>> all of my data down from Weather Underground using the Weewx utilities and
>> got the database updated. Weewx still doesn't insert data into the
>> database. It does continue to send data to Wunderground, just won't put it
>> into the database. I thought there could be an issue with the database so
>> I backed up my data, deleted the database and had Weewx create a new
>> database, still not adding data. I've double/triple checked the database
>> connection strings. I've removed the password and get an error that it
>> can't connect. It used the config files to create the new database, so it
>> can connect and is going to the correct database. Just isn't adding
>> records. I've set the logging to debug and there are no errors in the
>> logs. I'm at a loss. Anything else I can check? --
>> You received this message because you are subscribed to the Google Groups
>> "weewx-user" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to [email protected].
>> To view this discussion on the web visit
>> https://groups.google.com/d/msgid/weewx-user/40406f90-2f4a-4785-a0b2-2de05e16ee8dn%40googlegroups.com
>>
>> <https://groups.google.com/d/msgid/weewx-user/40406f90-2f4a-4785-a0b2-2de05e16ee8dn%40googlegroups.com?utm_medium=email&utm_source=footer>
>> .
>>
>> --
>> You received this message because you are subscribed to the Google Groups
>> "weewx-user" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to [email protected].
>>
> To view this discussion on the web visit
>> https://groups.google.com/d/msgid/weewx-user/5c47436c-589c-1985-f63f-35000f3d1c32%40gmail.com
>>
>> <https://groups.google.com/d/msgid/weewx-user/5c47436c-589c-1985-f63f-35000f3d1c32%40gmail.com?utm_medium=email&utm_source=footer>
>> .
>>
>
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/weewx-user/e8ab505c-53d6-44e2-a135-e6f79c8aea49n%40googlegroups.com.
Using verbosity=1, displaying most info
wee_debug output will be sent to stdout(console)
Using configuration file /etc/weewx/weewx.conf
Using database binding 'wx_binding', which is bound to database 'archive_mysql'
System info
Platform: Linux-4.19.66-v7+-armv7l-with-debian-9.13
Python Version: 2.7.13
Load Information
1 minute load average: 0.03
5 minute load average: 0.07
15 minute load average: 0.08
General Weewx info
Weewx version 4.1.1 detected.
Station info
Station type: Vantage
Driver: weewx.drivers.vantage
Driver info
[Vantage]
# This section is for the Davis Vantage series of weather stations.
# Connection type: serial or ethernet
# serial (the classic VantagePro)
# ethernet (the WeatherLinkIP or Serial-Ethernet bridge)
type = serial
# If the connection type is serial, a port must be specified:
# Debian, Ubuntu, Redhat, Fedora, and SuSE:
# /dev/ttyUSB0 is a common USB port name
# /dev/ttyS0 is a common serial port name
# BSD:
# /dev/cuaU0 is a common serial port name
port = /dev/ttyUSB0
# If the connection type is ethernet, an IP Address/hostname is required:
host = 1.2.3.4
######################################################
# The rest of this section rarely needs any attention.
# You can safely leave it "as is."
######################################################
# Serial baud rate (usually 19200)
baudrate = 19200
# TCP port (when using the WeatherLinkIP)
tcp_port = 22222
# TCP send delay (when using the WeatherLinkIP):
tcp_send_delay = 0.5
# The type of LOOP packet to request: 1 = LOOP1; 2 = LOOP2; 3 = both
loop_request = 1
# The id of your ISS station (usually 1). If you use a wind meter connected
# to a anemometer transmitter kit, use its id
iss_id = 1
# How long to wait for a response from the station before giving up (in
# seconds; must be greater than 2)
timeout = 4
# How long to wait before trying again (in seconds)
wait_before_retry = 1.2
# How many times to try before giving up:
max_tries = 4
# Vantage model Type: 1 = Vantage Pro; 2 = Vantage Pro2
model_type = 2
# The driver to use:
driver = weewx.drivers.vantage
Currently installed extensions
No extensions installed
Archive info
Database name: weewx
Table name: archive
Version 2.0
Unit system: None (Unknown unit constant)
First good timestamp: ******* N/A ******* ( N/A )
Last good timestamp: ******* N/A ******* ( N/A )
Number of records: None (no archive records found)
It is likely that the database (weewx) archive table
(archive)
exists but contains no data.
weewx (weewx.conf) is set to use an archive interval of 300 seconds.
The station hardware was not interrogated in determining archive interval.
Databases configured in weewx.conf
Database name: weewx.sdb
Database driver: weedb.sqlite
Database name: weewx
Database driver: weedb.mysql
Database host: 192.168.1.20
Parsed and obfuscated weewx.conf
# WEEWX CONFIGURATION FILE
#
# Copyright (c) 2009-2019 Tom Keffer <[email protected]>
# See the file LICENSE.txt for your rights.
##############################################################################
# This section is for general configuration information.
# Set to 1 for extra debug info, otherwise comment it out or set to zero
debug = 1
# Root directory of the weewx data file hierarchy for this station
WEEWX_ROOT = /
# Whether to log successful operations
log_success = True
# Whether to log unsuccessful operations
log_failure = True
# How long to wait before timing out a socket (FTP, HTTP) connection
socket_timeout = 20
# Do not modify this. It is used when installing and updating weewx.
version = 4.1.1
##############################################################################
# This section is for information about the station.
[Station]
# Description of the station location
location = "Triticum, Lovettsville, VA"
# Latitude in decimal degrees. Negative for southern hemisphere
latitude = 39.xxxxxxx # correct in conf file
# Longitude in decimal degrees. Negative for western hemisphere.
longitude = -77.xxxxxx # correct in conf file
# Altitude of the station, with unit it is in. This is downloaded from
# from the station if the hardware supports it.
altitude = 471, foot
# Set to type of station hardware. There must be a corresponding stanza
# in this file with a 'driver' parameter indicating the driver to be used.
station_type = Vantage
# If you have a website, you may specify an URL
#station_url = http://www.example.com
# The start of the rain year (1=January; 10=October, etc.). This is
# downloaded from the station if the hardware supports it.
rain_year_start = 1
# Start of week (0=Monday, 6=Sunday)
week_start = 6
##############################################################################
[Vantage]
# This section is for the Davis Vantage series of weather stations.
# Connection type: serial or ethernet
# serial (the classic VantagePro)
# ethernet (the WeatherLinkIP or Serial-Ethernet bridge)
type = serial
# If the connection type is serial, a port must be specified:
# Debian, Ubuntu, Redhat, Fedora, and SuSE:
# /dev/ttyUSB0 is a common USB port name
# /dev/ttyS0 is a common serial port name
# BSD:
# /dev/cuaU0 is a common serial port name
port = /dev/ttyUSB0
# If the connection type is ethernet, an IP Address/hostname is required:
host = 1.2.3.4
######################################################
# The rest of this section rarely needs any attention.
# You can safely leave it "as is."
######################################################
# Serial baud rate (usually 19200)
baudrate = 19200
# TCP port (when using the WeatherLinkIP)
tcp_port = 22222
# TCP send delay (when using the WeatherLinkIP):
tcp_send_delay = 0.5
# The type of LOOP packet to request: 1 = LOOP1; 2 = LOOP2; 3 = both
loop_request = 1
# The id of your ISS station (usually 1). If you use a wind meter connected
# to a anemometer transmitter kit, use its id
iss_id = 1
# How long to wait for a response from the station before giving up (in
# seconds; must be greater than 2)
timeout = 4
# How long to wait before trying again (in seconds)
wait_before_retry = 1.2
# How many times to try before giving up:
max_tries = 4
# Vantage model Type: 1 = Vantage Pro; 2 = Vantage Pro2
model_type = 2
# The driver to use:
driver = weewx.drivers.vantage
##############################################################################
# This section is for uploading data to Internet sites
[StdRESTful]
[[StationRegistry]]
# To register this weather station with weewx, set this to true
register_this_station = false
[[AWEKAS]]
# This section is for configuring posts to AWEKAS.
# If you wish to do this, set the option 'enable' to true,
# and specify a username and password.
# To guard against parsing errors, put the password in quotes.
enable = false
username = XXX obfuscated by wee_debug XXX
password = XXX obfuscated by wee_debug XXX
[[CWOP]]
# This section is for configuring posts to CWOP.
# If you wish to do this, set the option 'enable' to true,
# and specify the station ID (e.g., CW1234).
enable = true
station = XXX obfuscated by wee_debug XXX
# If this is an APRS (radio amateur) station, uncomment
# the following and replace with a passcode (e.g., 12345).
#passcode = replace_me (APRS stations only)
[[PWSweather]]
# This section is for configuring posts to PWSweather.com.
# If you wish to do this, set the option 'enable' to true,
# and specify a station and password.
# To guard against parsing errors, put the password in quotes.
enable = false
station = XXX obfuscated by wee_debug XXX
password = XXX obfuscated by wee_debug XXX
[[WOW]]
# This section is for configuring posts to WOW.
# If you wish to do this, set the option 'enable' to true,
# and specify a station and password.
# To guard against parsing errors, put the password in quotes.
enable = false
station = XXX obfuscated by wee_debug XXX
password = XXX obfuscated by wee_debug XXX
[[Wunderground]]
# This section is for configuring posts to the Weather Underground.
# If you wish to do this, set the option 'enable' to true,
# and specify a station (e.g., 'KORHOODR3') and password.
# To guard against parsing errors, put the password in quotes.
enable = True
station = XXX obfuscated by wee_debug XXX
password = XXX obfuscated by wee_debug XXX
# If you plan on using wunderfixer, set the following
# to your API key:
api_key = XXX obfuscated by wee_debug XXX
# Set the following to True to have weewx use the WU "Rapidfire"
# protocol. Not all hardware can support it. See the User's Guide.
rapidfire = True
log_success = False
log_failure = True
##############################################################################
# This section specifies what reports, using which skins, to generate.
[StdReport]
# Where the skins reside, relative to WEEWX_ROOT
SKIN_ROOT = /etc/weewx/skins
# Where the generated reports should go, relative to WEEWX_ROOT
HTML_ROOT = /var/www/html/weewx
# The database binding indicates which data should be used in reports.
data_binding = wx_binding
# Whether to log a successful operation
log_success = True
# Whether to log an unsuccessful operation
log_failure = False
# Each of the following subsections defines a report that will be run.
# See the customizing guide to change the units, plot types and line
# colors, modify the fonts, display additional sensor data, and other
# customizations. Many of those changes can be made here by overriding
# parameters, or by modifying templates within the skin itself.
[[SeasonsReport]]
# The SeasonsReport uses the 'Seasons' skin, which contains the
# images, templates and plots for the report.
skin = Seasons
enable = true
[[SmartphoneReport]]
# The SmartphoneReport uses the 'Smartphone' skin, and the images and
# files are placed in a dedicated subdirectory.
skin = Smartphone
enable = false
HTML_ROOT = /var/www/html/weewx/smartphone
[[MobileReport]]
# The MobileReport uses the 'Mobile' skin, and the images and files
# are placed in a dedicated subdirectory.
skin = Mobile
enable = false
HTML_ROOT = /var/www/html/weewx/mobile
[[StandardReport]]
# This is the old "Standard" skin. By default, it is not enabled.
skin = Standard
enable = false
[[FTP]]
# FTP'ing the results to a webserver is treated as just another report,
# albeit one with an unusual report generator!
skin = Ftp
# If you wish to use FTP, set "enable" to "true", then
# fill out the next four lines.
# Use quotes around passwords to guard against parsing errors.
enable = false
user = XXX obfuscated by wee_debug XXX
password = XXX obfuscated by wee_debug XXX
server = replace_me # The ftp server name, e.g, www.myserver.org
path = replace_me # The destination directory, e.g., /weather
# Set to True for an FTP over TLS (FTPS) connection. Not all servers
# support this.
secure_ftp = False
# To upload files from something other than what HTML_ROOT is set
# to above, specify a different HTML_ROOT here.
#HTML_ROOT = /var/www/html/weewx
# Most FTP servers use port 21
port = 21
# Set to 1 to use passive mode, zero for active mode
passive = 1
[[RSYNC]]
# rsync'ing to a webserver is treated as just another report
skin = Rsync
# If you wish to use rsync, you must configure passwordless ssh using
# public/private key authentication from the user account that weewx
# runs to the user account on the remote machine where the files
# will be copied.
#
# If you wish to use rsync, set "enable" to "true", then
# fill out server, user, and path.
# The server should appear in your .ssh/config file.
# The user is the username used in the identity file.
# The path is the destination directory, such as /var/www/html/weather.
# Be sure that the user has write permissions on the destination!
enable = false
server = replace_me
user = XXX obfuscated by wee_debug XXX
path = replace_me
# To upload files from something other than what HTML_ROOT is set
# to above, specify a different HTML_ROOT here.
#HTML_ROOT = /var/www/html/weewx
# Rsync can be configured to remove files from the remote server if
# they don't exist under HTML_ROOT locally. USE WITH CAUTION: if you
# make a mistake in the remote path, you could could unintentionally
# cause unrelated files to be deleted. Set to 1 to enable remote file
# deletion, zero to allow files to accumulate remotely.
delete = 0
####
# Various options for customizing your reports.
[[Defaults]]
[[[Units]]]
# The following section sets what unit to use for each unit group.
# NB: The unit is always in the singular. I.e., 'mile_per_hour',
# NOT 'miles_per_hour'
[[[[Groups]]]]
group_altitude = foot # Options are 'foot' or 'meter'
group_degree_day = degree_F_day # Options are 'degree_F_day'
or 'degree_C_day'
group_distance = mile # Options are 'mile' or 'km'
group_pressure = inHg # Options are 'inHg', 'mmHg', 'mbar',
or 'hPa'
group_rain = inch # Options are 'inch', 'cm', or 'mm'
group_rainrate = inch_per_hour # Options are
'inch_per_hour', 'cm_per_hour', or 'mm_per_hour'
group_speed = mile_per_hour # Options are 'mile_per_hour',
'km_per_hour', 'knot', or 'meter_per_second'
group_speed2 = mile_per_hour2 # Options are
'mile_per_hour2', 'km_per_hour2', 'knot2', or 'meter_per_second2'
group_temperature = degree_F # Options are 'degree_F' or
'degree_C'
# The following section sets the formatting for each type of unit.
[[[[StringFormats]]]]
centibar = %.0f
cm = %.2f
cm_per_hour = %.2f
degree_C = %.1f
degree_F = %.1f
degree_compass = %.0f
foot = %.0f
hPa = %.1f
hour = %.1f
inHg = %.3f
inch = %.2f
inch_per_hour = %.2f
km = %.1f
km_per_hour = %.0f
km_per_hour2 = %.1f
knot = %.0f
knot2 = %.1f
mbar = %.1f
meter = %.0f
meter_per_second = %.1f
meter_per_second2 = %.1f
mile = %.1f
mile_per_hour = %.0f
mile_per_hour2 = %.1f
mm = %.1f
mmHg = %.1f
mm_per_hour = %.1f
percent = %.0f
second = %.0f
uv_index = %.1f
volt = %.1f
watt_per_meter_squared = %.0f
NONE = " N/A"
# The following section overrides the label used for each type of
unit
[[[[Labels]]]]
meter = " meter", " meters" # You may prefer "metre".
day = " day", " days"
hour = " hour", " hours"
minute = " minute", " minutes"
second = " second", " seconds"
NONE = ""
# The following section sets the format for each time scale.
# The values below will work in every locale, but they may not look
# particularly attractive.
[[[[TimeFormats]]]]
hour = %H:%M
day = %X
week = %X (%A)
month = %x %X
year = %x %X
rainyear = %x %X
current = %x %X
ephem_day = %X
ephem_year = %x %X
[[[[Ordinates]]]]
# Ordinal directions. The last one is for no wind direction
directions = N, NNE, NE, ENE, E, ESE, SE, SSE, S, SSW, SW, WSW,
W, WNW, NW, NNW, N/A
# The following section sets the base temperatures used for the
# calculation of heating, cooling, and growing degree-days.
[[[[DegreeDays]]]]
# Base temperature for heating days, with unit:
heating_base = 65, degree_F
# Base temperature for cooling days, with unit:
cooling_base = 65, degree_F
# Base temperature for growing days, with unit:
growing_base = 50, degree_F
# A trend takes a difference across a time period. The following
# section sets the time period, and how big an error is allowed to
# still be counted as the start or end of a period.
[[[[Trend]]]]
time_delta = 10800 # 3 hours
time_grace = 300 # 5 minutes
# The labels to be used for each observation type
[[[Labels]]]
# Set to hemisphere abbreviations suitable for your location:
hemispheres = N, S, E, W
# Formats to be used for latitude whole degrees, longitude whole
# degrees, and minutes:
latlon_formats = %02d, %03d, %05.2f
# Generic labels, keyed by an observation type.
[[[[Generic]]]]
barometer = Barometer
dewpoint = Dew Point
ET = ET
heatindex = Heat Index
inHumidity = Inside Humidity
inTemp = Inside Temperature
outHumidity = Humidity
outTemp = Outside Temperature
radiation = Radiation
rain = Rain
rainRate = Rain Rate
UV = UV Index
windDir = Wind Direction
windGust = Gust Speed
windGustDir = Gust Direction
windSpeed = Wind Speed
windchill = Wind Chill
windgustvec = Gust Vector
windvec = Wind Vector
extraTemp1 = Temperature1
extraTemp2 = Temperature2
extraTemp3 = Temperature3
# Sensor status indicators
rxCheckPercent = Signal Quality
txBatteryStatus = Transmitter Battery
windBatteryStatus = Wind Battery
rainBatteryStatus = Rain Battery
outTempBatteryStatus = Outside Temperature Battery
inTempBatteryStatus = Inside Temperature Battery
consBatteryVoltage = Console Battery
heatingVoltage = Heating Battery
supplyVoltage = Supply Voltage
referenceVoltage = Reference Voltage
[[[Almanac]]]
# The labels to be used for the phases of the moon:
moon_phases = New, Waxing crescent, First quarter, Waxing gibbous,
Full, Waning gibbous, Last quarter, Waning crescent
##############################################################################
# This service acts as a filter, converting the unit system coming from
# the hardware to a unit system in the database.
[StdConvert]
# The target_unit affects only the unit system in the database. Once
# chosen it cannot be changed without converting the entire database.
# Modification of target_unit after starting weewx will result in
# corrupt data - the database will contain a mix of US and METRIC data.
#
# The value of target_unit does not affect the unit system for
# reporting - reports can display US, Metric, or any combination of units.
#
# In most cases, target_unit should be left as the default: US
#
# In particular, those migrating from a standard wview installation
# should use US since that is what the wview database contains.
# DO NOT MODIFY THIS VALUE UNLESS YOU KNOW WHAT YOU ARE DOING!
target_unit = US # Options are 'US', 'METRICWX', or 'METRIC'
##############################################################################
# This section can adjust data using calibration expressions.
[StdCalibrate]
[[Corrections]]
# For each type, an arbitrary calibration expression can be given.
# It should be in the units defined in the StdConvert section.
# Example:
foo = foo + 0.2
##############################################################################
# This section is for quality control checks. If units are not specified,
# values must be in the units defined in the StdConvert section.
[StdQC]
[[MinMax]]
barometer = 26, 32.5, inHg
pressure = 24, 34.5, inHg
outTemp = -40, 120, degree_F
inTemp = 10, 120, degree_F
outHumidity = 0, 100
inHumidity = 0, 100
windSpeed = 0, 120, mile_per_hour
rain = 0, 10, inch
##############################################################################
# This section controls the origin of derived values.
[StdWXCalculate]
[[Calculations]]
# How to calculate derived quantities. Possible values are:
# hardware - use the value provided by hardware
# software - use the value calculated by weewx
# prefer_hardware - use value provide by hardware if available,
# otherwise use value calculated by weewx
pressure = prefer_hardware
altimeter = prefer_hardware
appTemp = prefer_hardware
barometer = prefer_hardware
beaufort = prefer_hardware
cloudbase = prefer_hardware
dewpoint = prefer_hardware
ET = prefer_hardware
heatindex = prefer_hardware
humidex = prefer_hardware
inDewpoint = prefer_hardware
maxSolarRad = prefer_hardware
rainRate = prefer_hardware
windchill = prefer_hardware
windrun = prefer_hardware
##############################################################################
# For hardware that supports it, this section controls how often the
# onboard clock gets updated.
[StdTimeSynch]
# How often to check the weather station clock for drift (in seconds)
clock_check = 14400
# How much it can drift before we will correct it (in seconds)
max_drift = 5
##############################################################################
# This section is for configuring the archive service.
[StdArchive]
# If the station hardware supports data logging then the archive interval
# will be downloaded from the station. Otherwise, specify it (in seconds).
archive_interval = 300
# If possible, new archive records are downloaded from the station
# hardware. If the hardware does not support this, then new archive
# records will be generated in software.
# Set the following to "software" to force software record generation.
record_generation = hardware
# Whether to include LOOP data in hi/low statistics
loop_hilo = True
# The data binding used to save archive records
data_binding = wx_binding
##############################################################################
# This section binds a data store to a database.
[DataBindings]
[[wx_binding]]
# The database must match one of the sections in [Databases].
# This is likely to be the only option you would want to change.
database = archive_mysql
# The name of the table within the database
table_name = archive
# The manager handles aggregation of data for historical summaries
manager = weewx.manager.DaySummaryManager
# The schema defines the structure of the database.
# It is *only* used when the database is created.
schema = schemas.wview_extended.schema
##############################################################################
# This section defines various databases.
[Databases]
# A SQLite database is simply a single file
[[archive_sqlite]]
database_name = weewx.sdb
database_type = SQLite
# MySQL
[[archive_mysql]]
database_name = weewx
database_type = MySQL
##############################################################################
# This section defines defaults for the different types of databases.
[DatabaseTypes]
# Defaults for SQLite databases
[[SQLite]]
driver = weedb.sqlite
# Directory in which the database files are located
SQLITE_ROOT = /var/lib/weewx
# Defaults for MySQL databases
[[MySQL]]
driver = weedb.mysql
# The host where the database is located
host = 192.168.1.20
# The user name for logging in to the host
user = XXX obfuscated by wee_debug XXX
# The password for the user name (quotes guard against parsing errors)
password = XXX obfuscated by wee_debug XXX
##############################################################################
# This section configures the internal weewx engine.
[Engine]
[[Services]]
# This section specifies the services that should be run. They are
# grouped by type, and the order of services within each group
# determines the order in which the services will be run.
prep_services = weewx.engine.StdTimeSynch
data_services = ,
process_services = weewx.engine.StdConvert, weewx.engine.StdCalibrate,
weewx.engine.StdQC, weewx.wxservices.StdWXCalculate
archive_services = weewx.engine.StdArchive
restful_services = weewx.restx.StdStationRegistry,
weewx.restx.StdWunderground, weewx.restx.StdPWSweather, weewx.restx.StdCWOP,
weewx.restx.StdWOW, weewx.restx.StdAWEKAS
report_services = weewx.engine.StdPrint, weewx.engine.StdReport
wee_debug report successfully generatedSep 9 15:22:06 raspberrypi3 systemd[1]: Starting LSB: weewx weather system...
Sep 9 15:22:07 raspberrypi3 weewx[27818] INFO __main__: Initializing weewx
version 4.1.1
Sep 9 15:22:07 raspberrypi3 weewx[27818] INFO __main__: Using Python 2.7.13
(default, Aug 22 2020, 10:03:02) #012[GCC 6.3.0 20170516]
Sep 9 15:22:07 raspberrypi3 weewx[27818] INFO __main__: Platform
Linux-4.19.66-v7+-armv7l-with-debian-9.13
Sep 9 15:22:07 raspberrypi3 weewx[27818] INFO __main__: Locale is 'en_US.UTF-8'
Sep 9 15:22:07 raspberrypi3 weewx[27818] INFO __main__: PID file is
/var/run/weewx.pid
Sep 9 15:22:07 raspberrypi3 weewx[27806]: Starting weewx weather system: weewx.
Sep 9 15:22:07 raspberrypi3 systemd[1]: Started LSB: weewx weather system.
Sep 9 15:22:07 raspberrypi3 weewx[27822] INFO __main__: Using configuration
file /etc/weewx/weewx.conf
Sep 9 15:22:07 raspberrypi3 weewx[27822] INFO __main__: Debug is 1
Sep 9 15:22:07 raspberrypi3 weewx[27822] DEBUG __main__: Initializing engine
Sep 9 15:22:07 raspberrypi3 weewx[27822] INFO weewx.engine: Loading station
type Vantage (weewx.drivers.vantage)
Sep 9 15:22:07 raspberrypi3 weewx[27822] DEBUG weewx.drivers.vantage: Driver
version is 3.2.1
Sep 9 15:22:07 raspberrypi3 weewx[27822] DEBUG weewx.drivers.vantage: Opened
up serial port /dev/ttyUSB0; baud 19200; timeout 4.00
Sep 9 15:22:07 raspberrypi3 weewx[27822] DEBUG weewx.drivers.vantage: Gentle
wake up of console successful
Sep 9 15:22:07 raspberrypi3 weewx[27822] DEBUG weewx.drivers.vantage: Hardware
type is 16
Sep 9 15:22:07 raspberrypi3 weewx[27822] DEBUG weewx.drivers.vantage: ISS ID
is 1
Sep 9 15:22:07 raspberrypi3 weewx[27822] DEBUG weewx.drivers.vantage: Hardware
name: Vantage Pro2
Sep 9 15:22:07 raspberrypi3 weewx[27822] DEBUG weewx.engine: Loading service
weewx.engine.StdTimeSynch
Sep 9 15:22:07 raspberrypi3 weewx[27822] DEBUG weewx.engine: Finished loading
service weewx.engine.StdTimeSynch
Sep 9 15:22:07 raspberrypi3 weewx[27822] DEBUG weewx.engine: Loading service
weewx.engine.StdConvert
Sep 9 15:22:07 raspberrypi3 weewx[27822] INFO weewx.engine: StdConvert target
unit is 0x1
Sep 9 15:22:07 raspberrypi3 weewx[27822] DEBUG weewx.engine: Finished loading
service weewx.engine.StdConvert
Sep 9 15:22:07 raspberrypi3 weewx[27822] DEBUG weewx.engine: Loading service
weewx.engine.StdCalibrate
Sep 9 15:22:07 raspberrypi3 weewx[27822] DEBUG weewx.engine: Finished loading
service weewx.engine.StdCalibrate
Sep 9 15:22:07 raspberrypi3 weewx[27822] DEBUG weewx.engine: Loading service
weewx.engine.StdQC
Sep 9 15:22:07 raspberrypi3 weewx[27822] DEBUG weewx.engine: Finished loading
service weewx.engine.StdQC
Sep 9 15:22:07 raspberrypi3 weewx[27822] DEBUG weewx.engine: Loading service
weewx.wxservices.StdWXCalculate
Sep 9 15:22:07 raspberrypi3 weewx[27822] DEBUG weewx.manager: Daily summary
version is 2.0
Sep 9 15:22:07 raspberrypi3 weewx[27822] INFO weewx.wxservices: The following
values will be calculated: pressure=prefer_hardware, altimeter=prefer_hardware,
appTemp=prefer_hardware, barometer=prefer_hardware, beaufort=prefer_hardware,
cloudbase=prefer_hardware, dewpoint=prefer_hardware, ET=prefer_hardware,
heatindex=prefer_hardware, humidex=prefer_hardware, inDewpoint=prefer_hardware,
maxSolarRad=prefer_hardware, rainRate=prefer_hardware,
windchill=prefer_hardware, windrun=prefer_hardware
Sep 9 15:22:07 raspberrypi3 weewx[27822] INFO weewx.wxservices: The following
algorithms will be used for calculations: altimeter=aaASOS, maxSolarRad=RS
Sep 9 15:22:07 raspberrypi3 weewx[27822] DEBUG weewx.engine: Finished loading
service weewx.wxservices.StdWXCalculate
Sep 9 15:22:07 raspberrypi3 weewx[27822] DEBUG weewx.engine: Loading service
weewx.engine.StdArchive
Sep 9 15:22:07 raspberrypi3 weewx[27822] INFO weewx.engine: Archive will use
data binding wx_binding
Sep 9 15:22:07 raspberrypi3 weewx[27822] INFO weewx.engine: Record generation
will be attempted in 'hardware'
Sep 9 15:22:07 raspberrypi3 weewx[27822] INFO weewx.engine: Using archive
interval of 300 seconds (specified by hardware)
Sep 9 15:22:07 raspberrypi3 weewx[27822] DEBUG weewx.engine: Use LOOP data in
hi/low calculations: 1
Sep 9 15:22:07 raspberrypi3 weewx[27822] DEBUG weewx.engine: Finished loading
service weewx.engine.StdArchive
Sep 9 15:22:07 raspberrypi3 weewx[27822] DEBUG weewx.engine: Loading service
weewx.restx.StdStationRegistry
Sep 9 15:22:07 raspberrypi3 weewx[27822] INFO weewx.restx: StationRegistry:
Registration not requested.
Sep 9 15:22:07 raspberrypi3 weewx[27822] DEBUG weewx.engine: Finished loading
service weewx.restx.StdStationRegistry
Sep 9 15:22:07 raspberrypi3 weewx[27822] DEBUG weewx.engine: Loading service
weewx.restx.StdWunderground
Sep 9 15:22:07 raspberrypi3 weewx[27822] DEBUG weewx.restx: WU essentials: {}
Sep 9 15:22:07 raspberrypi3 weewx[27822] INFO weewx.restx: Wunderground-RF:
Data for station KVALOVET13 will be posted
Sep 9 15:22:07 raspberrypi3 weewx[27822] DEBUG weewx.engine: Finished loading
service weewx.restx.StdWunderground
Sep 9 15:22:07 raspberrypi3 weewx[27822] DEBUG weewx.engine: Loading service
weewx.restx.StdPWSweather
Sep 9 15:22:07 raspberrypi3 weewx[27822] INFO weewx.restx: PWSweather: Posting
not enabled.
Sep 9 15:22:07 raspberrypi3 weewx[27822] DEBUG weewx.engine: Finished loading
service weewx.restx.StdPWSweather
Sep 9 15:22:07 raspberrypi3 weewx[27822] DEBUG weewx.engine: Loading service
weewx.restx.StdCWOP
Sep 9 15:22:07 raspberrypi3 weewx[27822] INFO weewx.restx: CWOP: Data for
station EW8037 will be posted
Sep 9 15:22:07 raspberrypi3 weewx[27822] DEBUG weewx.engine: Finished loading
service weewx.restx.StdCWOP
Sep 9 15:22:07 raspberrypi3 weewx[27822] DEBUG weewx.engine: Loading service
weewx.restx.StdWOW
Sep 9 15:22:07 raspberrypi3 weewx[27822] INFO weewx.restx: WOW: Posting not
enabled.
Sep 9 15:22:07 raspberrypi3 weewx[27822] DEBUG weewx.engine: Finished loading
service weewx.restx.StdWOW
Sep 9 15:22:07 raspberrypi3 weewx[27822] DEBUG weewx.engine: Loading service
weewx.restx.StdAWEKAS
Sep 9 15:22:07 raspberrypi3 weewx[27822] INFO weewx.restx: AWEKAS: Posting not
enabled.
Sep 9 15:22:07 raspberrypi3 weewx[27822] DEBUG weewx.engine: Finished loading
service weewx.restx.StdAWEKAS
Sep 9 15:22:07 raspberrypi3 weewx[27822] DEBUG weewx.engine: Loading service
weewx.engine.StdPrint
Sep 9 15:22:07 raspberrypi3 weewx[27822] DEBUG weewx.engine: Finished loading
service weewx.engine.StdPrint
Sep 9 15:22:07 raspberrypi3 weewx[27822] DEBUG weewx.engine: Loading service
weewx.engine.StdReport
Sep 9 15:22:07 raspberrypi3 weewx[27822] DEBUG weewx.engine: Finished loading
service weewx.engine.StdReport
Sep 9 15:22:07 raspberrypi3 weewx[27822] INFO __main__: Starting up weewx
version 4.1.1
Sep 9 15:22:07 raspberrypi3 weewx[27822] DEBUG weewx.drivers.vantage: Gentle
wake up of console successful
Sep 9 15:22:07 raspberrypi3 weewx[27822] INFO weewx.engine: Clock error is
1.44 seconds (positive is fast)
Sep 9 15:22:07 raspberrypi3 weewx[27822] INFO weewx.engine: Using binding
'wx_binding' to database 'weewx'
Sep 9 15:22:07 raspberrypi3 weewx[27822] INFO weewx.manager: Starting backfill
of daily summaries
Sep 9 15:22:07 raspberrypi3 weewx[27822] DEBUG weewx.drivers.vantage: Getting
all archive packets
Sep 9 15:22:07 raspberrypi3 weewx[27822] DEBUG weewx.manager: Daily summary
version is 2.0
Sep 9 15:22:07 raspberrypi3 weewx[27822] DEBUG weewx.manager: Daily summary
version is 2.0
Sep 9 15:22:07 raspberrypi3 weewx[27822] DEBUG weewx.drivers.vantage: Gentle
wake up of console successful
Sep 9 15:22:07 raspberrypi3 weewx[27822] DEBUG weewx.drivers.vantage:
Retrieving 429 page(s); starting index= 0
Sep 9 15:22:07 raspberrypi3 weewx[27822] DEBUG weewx.drivers.vantage: Empty
record page 0; index 0
Sep 9 15:22:07 raspberrypi3 weewx[27822] INFO weewx.engine: Starting main
packet loop.
Sep 9 15:22:07 raspberrypi3 weewx[27822] DEBUG weewx.drivers.vantage: Gentle
wake up of console successful
Sep 9 15:22:07 raspberrypi3 weewx[27822] DEBUG weewx.drivers.vantage:
Requesting 200 LOOP packets.
Sep 9 15:22:07 raspberrypi3 weewx[27822] DEBUG weewx.drivers.vantage: Gentle
wake up of console successful
