look in weewx.conf to see which skin is enabled. if you are running weewx 4.1.1 (i didn’t see version stated) then likely this is Seasons skin, and you will need to hear back from Seasons skin folk on whether it auto-configures to pick up lightning values (i think there has been recent work on this but i don't think it has hit release yet)
> On 26 Sep 2020, at 1:40 pm, wxwatching <[email protected]> wrote: > > Using default skin, and I don't see any values regarding lightning. > > On Friday, September 25, 2020 at 11:27:37 PM UTC-4 [email protected] wrote: > looks like lightning count and distance are in the weewx packet, so > presumably it is ‘in the weewx system'. > what skin are you using, and how does it display those values? > > >> On 26 Sep 2020, at 12:29 pm, wxwatching <[email protected] >> <applewebdata://2E89C0F2-7D98-495A-8288-C94060FBC93F>> wrote: >> > >> >> So, I had a storm come through the area and MyAcurite shows 8 strikes today >> with last one at 9:36 PM EDT at 1 mile. I don't see anything regarding >> strike data in the web display for Weewx. >> >> I have the model 06075M lightning detector installed in my Atlas: >> >> https://www.acurite.com/shop-all/weather-instruments/weather-sensors-and-parts/accessories/atlas-lightning-detection-sensor.html?ref=name >> >> <https://www.acurite.com/shop-all/weather-instruments/weather-sensors-and-parts/accessories/atlas-lightning-detection-sensor.html?ref=name> >> >> I am using the sdr.py to retrieve the data from my Atlas. >> >> [SDR] >> # This section is for the software-defined radio driver. >> >> # The driver to use >> driver = user.sdr >> path = /usr/local/bin >> >> [[sensor_map]] >> outTempBatteryStatus = battery.0222.AcuriteAtlasPacket >> outTemp = temperature.0222.AcuriteAtlasPacket >> outHumidity = humidity.0222.AcuriteAtlasPacket >> windSpeed = wind_speed.0222.AcuriteAtlasPacket >> windDir = wind_dir.0222.AcuriteAtlasPacket >> UV = uv.0222.AcuriteAtlasPacket >> rain_total = rain_total.0222.AcuriteAtlasPacket >> radiation = lux.0222.AcuriteAtlasPacket >> strikes_total = strike_count.0222.AcuriteAtlasPacket >> strike_distance = strike_distance.0222.AcuriteAtlasPacket >> lux = lux.0222.AcuriteAtlasPacket >> log_unknown_sensors = True >> log_unmapped_sensors = True >> >> [[deltas]] >> rain = rain_total >> Lightning_Strikes = strikes_total >> >> Here's a bit of the syslog output: >> >> Sep 25 22:09:43 raspberrypi weewx[11886] DEBUG user.sdr: lines=['{"time" : >> "2020-09-26 02:09:40", "model" : "Acurite-Atlas", "id" : 546, "channel" : >> "A", "sequence_num" : 0, "battery_ok" : 1, "subtype" : 39, "wind_avg_mi_h" : >> 6.000, "uv" : 0, "lux" : 0, "strike_count" : 9, "strike_distance" : 0, >> "exception" : 0, "raw_msg" : "c222e70300000082a0f0"}\n', '{"time" : >> "2020-09-26 02:09:40", "model" : "Acurite-Atlas", "id" : 546, "channel" : >> "A", "sequence_num" : 1, "battery_ok" : 1, "subtype" : 39, "wind_avg_mi_h" : >> 6.000, "uv" : 0, "lux" : 0, "strike_count" : 9, "strike_distance" : 0, >> "exception" : 0, "raw_msg" : "c622e70300000082a0f4"}\n', '{"time" : >> "2020-09-26 02:09:40", "model" : "Acurite-Atlas", "id" : 546, "channel" : >> "A", "sequence_num" : 2, "battery_ok" : 1, "subtype" : 39, "wind_avg_mi_h" : >> 6.000, "uv" : 0, "lux" : 0, "strike_count" : 9, "strike_distance" : 0, >> "exception" : 0, "raw_msg" : "ca22e70300000082a0f8"}\n'] >> Sep 25 22:09:43 raspberrypi weewx[11886] DEBUG user.sdr: >> packet={'outTempBatteryStatus': 0, 'windSpeed': 6.0, 'UV': 0, 'radiation': >> 0, 'lux': 0, 'dateTime': 1601086180, 'usUnits': 1} >> Sep 25 22:09:43 raspberrypi weewx[11886] DEBUG user.sdr: >> packet={'outTempBatteryStatus': 0, 'windSpeed': 6.0, 'UV': 0, 'radiation': >> 0, 'lux': 0, 'dateTime': 1601086180, 'usUnits': 1} >> Sep 25 22:09:43 raspberrypi weewx[11886] DEBUG user.sdr: >> packet={'outTempBatteryStatus': 0, 'windSpeed': 6.0, 'UV': 0, 'radiation': >> 0, 'lux': 0, 'dateTime': 1601086180, 'usUnits': 1} >> Sep 25 22:09:46 raspberrypi weewx[11886] DEBUG user.sdr: lines=[] >> Sep 25 22:09:50 raspberrypi weewx[11886] DEBUG user.sdr: lines=[] >> Sep 25 22:09:53 raspberrypi weewx[11886] DEBUG user.sdr: lines=['{"time" : >> "2020-09-26 02:09:50", "model" : "Acurite-Atlas", "id" : 546, "channel" : >> "A", "sequence_num" : 0, "battery_ok" : 1, "subtype" : 37, "wind_avg_mi_h" : >> 4.000, "temperature_F" : 70.000, "humidity" : 100, "strike_count" : 9, >> "strike_distance" : 0, "exception" : 0, "raw_msg" : >> "c222658288cce482a025"}\n', '{"time" : "2020-09-26 02:09:50", "model" : >> "Acurite-Atlas", "id" : 546, "channel" : "A", "sequence_num" : 1, >> "battery_ok" : 1, "subtype" : 37, "wind_avg_mi_h" : 4.000, "temperature_F" : >> 70.000, "humidity" : 100, "strike_count" : 9, "strike_distance" : 0, >> "exception" : 0, "raw_msg" : "c622658288cce482a029"}\n', '{"time" : >> "2020-09-26 02:09:50", "model" : "Acurite-Atlas", "id" : 546, "channel" : >> "A", "sequence_num" : 2, "battery_ok" : 1, "subtype" : 37, "wind_avg_mi_h" : >> 4.000, "temperature_F" : 70.000, "humidity" : 100, "strike_count" : 9, >> "strike_distance" : 0, "exception" : 0, "raw_msg" : >> "ca22658288cce482a02d"}\n'] >> >> So, how can I properly get the lightning data via sdr.py and that displayed >> in Weewx html output? >> > >> -- >> You received this message because you are subscribed to the Google Groups >> "weewx-user" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected] >> <applewebdata://2E89C0F2-7D98-495A-8288-C94060FBC93F>. >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/weewx-user/924074e2-ed03-4f85-ab71-44307546b9bbn%40googlegroups.com >> >> <https://groups.google.com/d/msgid/weewx-user/924074e2-ed03-4f85-ab71-44307546b9bbn%40googlegroups.com?utm_medium=email&utm_source=footer>. > > > -- > You received this message because you are subscribed to the Google Groups > "weewx-user" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected] > <mailto:[email protected]>. > To view this discussion on the web visit > https://groups.google.com/d/msgid/weewx-user/93aaab7c-0b17-41e2-a9a4-a350a52ad8ddn%40googlegroups.com > > <https://groups.google.com/d/msgid/weewx-user/93aaab7c-0b17-41e2-a9a4-a350a52ad8ddn%40googlegroups.com?utm_medium=email&utm_source=footer>. -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/D69F3BB2-1734-4CA4-AE7B-A86C171F74AF%40gmail.com.
