One idea might be to use one of the commonly available 433MHz sensors and 
use the weewx-sdr driver (and rtl-sdr / rtl-433) to pick up the signal on 
your server. I can pick up the data easily from 150' (50m) away using a 
cheap RTL2832U SDR USB stick and the supplied whip antenna.

regards
Peter

On Thursday, October 22, 2020 at 1:54:33 AM UTC+1 [email protected] wrote:

> Hi Mike,
>
> You could use the Ecowitt WH31 outdoor temp & humidity sensor coupled with 
> a GW1000 to do this. 
>
> In fact the GW1000 can monitor 8 WH31's so you could keep track of temp & 
> humidity in multiple areas.
>
> regards
>
> Tim
>
>
> On 21/10/20 11:36 pm, Mike Revitt wrote:
>
> Standalone,
>
>  
>
> I want to measure the inside temperature of my Caravan over winter to make 
> sure that the heater stops it from getting too damp and stops it getting 
> too cold
>
>  
>
> On Wednesday, October 21, 2020 at 12:55:30 PM UTC+1 [email protected] 
> wrote:
>
>> standalone wifi temp gauge, or part of a wifi weather station?
>>
>> On 21 Oct 2020, at 10:30 pm, Mike Revitt <[email protected]> wrote:
>>
>> Just wondered if anyone has a remote temperature gauge, WiFi connected, 
>> that they use to feed into Weews. 
>>
>> If so what make/model temperature gauge did you use and how did you get 
>> the data into Weewx.
>>
>> The getting the data in bit I am less concerned about having successfully 
>> gotten my Raspberry Pi CPU temperature into Weewx, but would appreciate any 
>> advise on this thanks
>>
>> Mike 
>>
>> -- 
>> You received this message because you are subscribed to the Google Groups 
>> "weewx-user" group.
>> To unsubscribe from this group and stop receiving emails from it, send an 
>> email to [email protected].
>> To view this discussion on the web visit 
>> https://groups.google.com/d/msgid/weewx-user/47833467-454b-4b03-af9e-acd44aeff58bn%40googlegroups.com
>>  
>> <https://groups.google.com/d/msgid/weewx-user/47833467-454b-4b03-af9e-acd44aeff58bn%40googlegroups.com?utm_medium=email&utm_source=footer>
>> .
>>
>>
>> -- 
> You received this message because you are subscribed to the Google Groups 
> "weewx-user" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to [email protected].
>
> To view this discussion on the web visit 
> https://groups.google.com/d/msgid/weewx-user/90438fd5-dba9-47c2-a9aa-980b3db3f687n%40googlegroups.com
>  
> <https://groups.google.com/d/msgid/weewx-user/90438fd5-dba9-47c2-a9aa-980b3db3f687n%40googlegroups.com?utm_medium=email&utm_source=footer>
> .
>
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to [email protected].
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/27117bd1-3fb0-43b5-a531-2a949e31f18dn%40googlegroups.com.

Reply via email to