Here is more logging - from the time weewx was started until the log above:
Oct 23 08:19:47 www weewx[5566] INFO __main__: Initializing weewx version 4.1.1 Oct 23 08:19:47 www weewx[5566] INFO __main__: Using Python 3.9.0 (default, Oct 21 2020, 20:34:45) [GCC 10.2.0] Oct 23 08:19:47 www weewx[5566] INFO __main__: Platform Linux-5.9.1-x86_64-with-glibc2.32 Oct 23 08:19:47 www weewx[5566] INFO __main__: Locale is 'C' Oct 23 08:19:47 www weewx[5566] INFO __main__: PID file is /var/run/weewx.pid Oct 23 08:19:47 www weewx[5569] INFO __main__: Using configuration file /home/weewx/weewx.conf Oct 23 08:19:47 www weewx[5569] INFO __main__: Debug is 0 Oct 23 08:19:47 www weewx[5569] INFO weewx.engine: Loading station type Vantage (weewx.drivers.vantage) Oct 23 08:19:54 www weewx[5569] INFO weewx.engine: StdConvert target unit is 0x1 Oct 23 08:19:54 www weewx[5569] INFO weewx.wxservices: The following values will be calculated: pressure=prefer_hardware, altimeter=prefer_hardware, appTemp=prefer_hardware, barometer=prefer_hardware, beaufort=prefer_hardware, cloudbase=prefer_hardware, dewpoint=prefer_hardware, ET=prefer_hardware, heatindex=prefer_hardware, humidex=prefer_hardware, inDewpoint=prefer_hardware, maxSolarRad=prefer_hardware, rainRate=prefer_hardware, windchill=prefer_hardware, windrun=prefer_hardware Oct 23 08:19:54 www weewx[5569] INFO weewx.wxservices: The following algorithms will be used for calculations: altimeter=aaASOS, maxSolarRad=RS Oct 23 08:19:54 www weewxd: purpleair: service version is 0.1 Oct 23 08:19:54 www weewx[5569] INFO weewx.manager: Created and initialized table 'archive' in database 'purpleair.sdb' Oct 23 08:19:54 www weewx[5569] INFO weewx.manager: Created daily summary tables Oct 23 08:19:55 www weewx[5569] INFO weewx.engine: Archive will use data binding wx_binding Oct 23 08:19:55 www weewx[5569] INFO weewx.engine: Record generation will be attempted in 'hardware' Oct 23 08:19:55 www weewx[5569] INFO weewx.engine: Using archive interval of 300 seconds (specified by hardware) Oct 23 08:19:55 www weewx[5569] INFO weewx.restx: StationRegistry: Station will be registered. Oct 23 08:19:55 www weewx[5569] INFO weewx.restx: Wunderground: Posting not enabled. Oct 23 08:19:55 www weewx[5569] INFO weewx.restx: PWSweather: Posting not enabled. Oct 23 08:19:55 www weewx[5569] INFO weewx.restx: CWOP: Posting not enabled. Oct 23 08:19:55 www weewx[5569] INFO weewx.restx: WOW: Posting not enabled. Oct 23 08:19:55 www weewx[5569] INFO weewx.restx: AWEKAS: Posting not enabled. Oct 23 08:19:55 www weewx[5569] INFO __main__: Starting up weewx version 4.1.1 Oct 23 08:19:57 www weewx[5569] INFO weewx.engine: Clock error is -0.01 seconds (positive is fast) Oct 23 08:19:57 www weewx[5569] INFO weewx.engine: Using binding 'wx_binding' to database 'weewxarchive' Oct 23 08:19:57 www weewx[5569] INFO weewx.manager: Starting backfill of daily summaries Oct 23 08:20:01 www weewxd: purpleair: Skipping record: time difference 2101 too big Oct 23 08:20:01 www weewx[5569] INFO weewx.manager: Added record 2020-10-23 07:45:00 PDT (1603464300) to database 'weewxarchive' Oct 23 08:20:01 www weewx[5569] INFO weewx.manager: Added record 2020-10-23 07:45:00 PDT (1603464300) to daily summary in 'weewxarchive' Oct 23 08:20:01 www weewxd: purpleair: Skipping record: time difference 1801 too big Oct 23 08:20:01 www weewx[5569] INFO weewx.manager: Added record 2020-10-23 07:50:00 PDT (1603464600) to database 'weewxarchive' Oct 23 08:20:01 www weewx[5569] INFO weewx.manager: Added record 2020-10-23 07:50:00 PDT (1603464600) to daily summary in 'weewxarchive' Oct 23 08:20:01 www weewxd: purpleair: Skipping record: time difference 1441 too big Oct 23 08:20:01 www weewx[5569] INFO weewx.manager: Added record 2020-10-23 07:56:00 PDT (1603464960) to database 'weewxarchive' Oct 23 08:20:01 www weewx[5569] INFO weewx.manager: Added record 2020-10-23 07:56:00 PDT (1603464960) to daily summary in 'weewxarchive' Oct 23 08:20:01 www weewxd: purpleair: Skipping record: time difference 1201 too big Oct 23 08:20:01 www weewx[5569] INFO weewx.manager: Added record 2020-10-23 08:00:00 PDT (1603465200) to database 'weewxarchive' Oct 23 08:20:01 www weewx[5569] INFO weewx.manager: Added record 2020-10-23 08:00:00 PDT (1603465200) to daily summary in 'weewxarchive' Oct 23 08:20:01 www weewxd: purpleair: Skipping record: time difference 901 too big Oct 23 08:20:01 www weewx[5569] INFO weewx.manager: Added record 2020-10-23 08:05:00 PDT (1603465500) to database 'weewxarchive' Oct 23 08:20:01 www weewx[5569] INFO weewx.manager: Added record 2020-10-23 08:05:00 PDT (1603465500) to daily summary in 'weewxarchive' Oct 23 08:20:02 www weewxd: purpleair: Skipping record: time difference 602 too big Oct 23 08:20:02 www weewx[5569] INFO weewx.manager: Added record 2020-10-23 08:10:00 PDT (1603465800) to database 'weewxarchive' Oct 23 08:20:02 www weewx[5569] INFO weewx.manager: Added record 2020-10-23 08:10:00 PDT (1603465800) to daily summary in 'weewxarchive' Oct 23 08:20:02 www weewxd: purpleair: Skipping record: time difference 302 too big Oct 23 08:20:02 www weewx[5569] INFO weewx.manager: Added record 2020-10-23 08:15:00 PDT (1603466100) to database 'weewxarchive' Oct 23 08:20:02 www weewx[5569] INFO weewx.manager: Added record 2020-10-23 08:15:00 PDT (1603466100) to daily summary in 'weewxarchive' Oct 23 08:20:02 www weewx[5569] INFO weewx.engine: Starting main packet loop. Oct 23 08:20:02 www weewx[5569] INFO weewx.restx: StationRegistry: Published record 2020-10-23 07:45:00 PDT (1603464300) Oct 23 08:25:19 www weewxd: purpleair: Skipping record: time difference 319 too big Oct 23 08:25:19 www weewx[5569] INFO weewx.manager: Added record 2020-10-23 08:20:00 PDT (1603466400) to database 'weewxarchive' Oct 23 08:25:19 www weewx[5569] INFO weewx.manager: Added record 2020-10-23 08:20:00 PDT (1603466400) to daily summary in 'weewxarchive' Oct 23 08:25:19 www weewx[5569] INFO weewx.manager: Added record 2020-10-23 08:25:00 PDT (1603466700) to database 'weewxarchive' Oct 23 08:25:19 www weewx[5569] INFO weewx.manager: Added record 2020-10-23 08:25:00 PDT (1603466700) to daily summary in 'weewxarchive' Oct 23 08:25:42 www weewx[5569] INFO weewx.cheetahgenerator: Generated 117 files for report StandardReport in 22.64 seconds Oct 23 08:25:46 www weewx[5569] INFO weewx.imagegenerator: Generated 49 images for report StandardReport in 4.53 seconds Oct 23 08:25:46 www weewx[5569] INFO weewx.reportengine: Copied 14 files to /home/weewx/public_html On Friday, October 23, 2020 at 9:00:14 AM UTC-7 Joel Bion wrote: > My setup is exactly what I mentioned in the subject. No changes except to > customizing weewx.conf, and adding the purpleair extension. Below this > error log, I include the contents of weewx.conf > > Oct 23 08:30:19 www weewx[5569] INFO weewx.manager: Added record > 2020-10-23 08:30:19 PDT (1603467019) to database 'purpleair.sdb' > Oct 23 08:30:19 www weewx[5569] INFO weewx.manager: Added record > 2020-10-23 08:30:19 PDT (1603467019) to daily summary in 'purpleair.sdb' > Oct 23 08:30:19 www weewx[5569] INFO weewx.manager: Added record > 2020-10-23 08:30:00 PDT (1603467000) to database 'weewxarchive' > Oct 23 08:30:19 www weewx[5569] INFO weewx.manager: Added record > 2020-10-23 08:30:00 PDT (1603467000) to daily summary in 'weewxarchive' > Oct 23 08:30:19 www weewx[5569] INFO weewx.engine: Main loop exiting. > Shutting engine down. > Oct 23 08:30:19 www weewx[5569] INFO weewx.engine: Shutting down StdReport > thread > Oct 23 08:30:20 www weewx[5569] CRITICAL __main__: Caught unrecoverable > exception: > Oct 23 08:30:20 www weewx[5569] CRITICAL __main__: **** > 'StdReportEngine' object has no attribute 'isAlive' > Oct 23 08:30:20 www weewx[5569] CRITICAL __main__: **** Traceback > (most recent call last): > Oct 23 08:30:20 www weewx[5569] CRITICAL __main__: **** File > "/home/weewx/bin/weewx/engine.py", line 195, in run > Oct 23 08:30:20 www weewx[5569] CRITICAL __main__: **** > self.dispatchEvent(weewx.Event(weewx.CHECK_LOOP, packet=packet)) > Oct 23 08:30:20 www weewx[5569] CRITICAL __main__: **** File > "/home/weewx/bin/weewx/engine.py", line 224, in dispatchEvent > Oct 23 08:30:20 www weewx[5569] CRITICAL __main__: **** > callback(event) > Oct 23 08:30:20 www weewx[5569] CRITICAL __main__: **** File > "/home/weewx/bin/weewx/engine.py", line 578, in check_loop > Oct 23 08:30:20 www weewx[5569] CRITICAL __main__: **** raise > BreakLoop > Oct 23 08:30:20 www weewx[5569] CRITICAL __main__: **** > weewx.engine.BreakLoop > Oct 23 08:30:20 www weewx[5569] CRITICAL __main__: **** > Oct 23 08:30:20 www weewx[5569] CRITICAL __main__: **** During > handling of the above exception, another exception occurred: > Oct 23 08:30:20 www weewx[5569] CRITICAL __main__: **** > Oct 23 08:30:20 www weewx[5569] CRITICAL __main__: **** Traceback > (most recent call last): > Oct 23 08:30:20 www weewx[5569] CRITICAL __main__: **** File > "/home/weewx/bin/weewxd", line 154, in main > Oct 23 08:30:20 www weewx[5569] CRITICAL __main__: **** > engine.run() > Oct 23 08:30:20 www weewx[5569] CRITICAL __main__: **** File > "/home/weewx/bin/weewx/engine.py", line 202, in run > Oct 23 08:30:20 www weewx[5569] CRITICAL __main__: **** > self.dispatchEvent(weewx.Event(weewx.POST_LOOP)) > Oct 23 08:30:20 www weewx[5569] CRITICAL __main__: **** File > "/home/weewx/bin/weewx/engine.py", line 224, in dispatchEvent > Oct 23 08:30:20 www weewx[5569] CRITICAL __main__: **** > callback(event) > Oct 23 08:30:20 www weewx[5569] CRITICAL __main__: **** File > "/home/weewx/bin/weewx/engine.py", line 776, in launch_report_thread > Oct 23 08:30:20 www weewx[5569] CRITICAL __main__: **** if > self.thread and self.thread.isAlive(): > Oct 23 08:30:20 www weewx[5569] CRITICAL __main__: **** > AttributeError: 'StdReportEngine' object has no attribute 'isAlive' > Oct 23 08:30:20 www weewx[5569] CRITICAL __main__: **** Exiting. > # WEEWX CONFIGURATION FILE > # > # Copyright (c) 2009-2019 Tom Keffer <[email protected]> > # See the file LICENSE.txt for your rights. > > > ############################################################################## > > # This section is for general configuration information. > > # Set to 1 for extra debug info, otherwise comment it out or set to zero > debug = 0 > > # Root directory of the weewx data file hierarchy for this station > WEEWX_ROOT = /home/weewx > > # Whether to log successful operations > log_success = True > > # Whether to log unsuccessful operations > log_failure = True > > # How long to wait before timing out a socket (FTP, HTTP) connection > socket_timeout = 20 > > # Do not modify this. It is used when installing and updating weewx. > version = 4.1.1 > > > ############################################################################## > > # This section is for information about the station. > > [Station] > > # Description of the station location > location = "Saratoga, California (West Valley College Area)" > > # Latitude in decimal degrees. Negative for southern hemisphere > latitude = 37.26260076 > # Longitude in decimal degrees. Negative for western hemisphere. > longitude = -122.00330353 > > # Altitude of the station, with unit it is in. This is downloaded from > # from the station if the hardware supports it. > altitude = 372, foot # Choose 'foot' or 'meter' for unit > > # Set to type of station hardware. There must be a corresponding stanza > # in this file with a 'driver' parameter indicating the driver to be > used. > station_type = Vantage > > # If you have a website, you may specify an URL > station_url = https://westvi.com/weather > > # The start of the rain year (1=January; 10=October, etc.). This is > # downloaded from the station if the hardware supports it. > rain_year_start = 10 > > # Start of week (0=Monday, 6=Sunday) > week_start = 6 > > > ############################################################################## > > [Vantage] > # This section is for a Davis VantagePro2, VantageVue or WeatherLinkIP > > # Connection type: serial or ethernet > # serial (the classic VantagePro) > # ethernet (the WeatherLinkIP) > type = ethernet > > # If the connection type is serial, a port must be specified: > # Debian, Ubuntu, Redhat, Fedora, and SuSE: > # /dev/ttyUSB0 is a common USB port name > # /dev/ttyS0 is a common serial port name > # BSD: > # /dev/cuaU0 is a common serial port name > #port = /dev/vpro > > # If the connection type is ethernet, an IP Address/hostname is > required: > host = 173.11.83.165 > > ###################################################### > # The rest of this section rarely needs any attention. > # You can safely leave it "as is." > ###################################################### > > # Serial baud rate (usually 19200) > baudrate = 19200 > > # TCP port (when using the WeatherLinkIP) > # Default is 22222! > tcp_port = 22225 > > # TCP send delay (when using the WeatherLinkIP): > tcp_send_delay = 1 > > # The type of LOOP packet to request: 1 = LOOP1; 2 = LOOP2; 3 = both > loop_request = 1 > > # The id of your ISS station (usually 1) > iss_id = 1 > > # How long to wait for a response from the station before giving up (in > # seconds; must be greater than 2) > timeout = 5 > > # How long to wait before trying again (in seconds) > wait_before_retry = 1.2 > > # How many times to try before giving up: > max_tries = 4 > > # The driver to use: > driver = weewx.drivers.vantage > > > ############################################################################## > > # This section is for uploading data to Internet sites > > [StdRESTful] > > [[StationRegistry]] > # To register this weather station with weewx, set this to true > register_this_station = true > > [[AWEKAS]] > # This section is for configuring posts to AWEKAS. > > # If you wish to do this, set the option 'enable' to true, > # and specify a username and password. > # To guard against parsing errors, put the password in quotes. > enable = false > username = replace_me > password = replace_me > > [[CWOP]] > # This section is for configuring posts to CWOP. > > # If you wish to do this, set the option 'enable' to true, > # and specify the station ID (e.g., CW1234). > enable = false > station = replace_me > > # If this is an APRS (radio amateur) station, uncomment > # the following and replace with a passcode (e.g., 12345). > #passcode = replace_me (APRS stations only) > > [[PWSweather]] > # This section is for configuring posts to PWSweather.com. > > # If you wish to do this, set the option 'enable' to true, > # and specify a station and password. > # To guard against parsing errors, put the password in quotes. > enable = false > station = replace_me > password = replace_me > > [[WOW]] > # This section is for configuring posts to WOW. > > # If you wish to do this, set the option 'enable' to true, > # and specify a station and password. > # To guard against parsing errors, put the password in quotes. > enable = false > station = replace_me > password = replace_me > > [[Wunderground]] > # This section is for configuring posts to the Weather Underground. > > # If you wish to do this, set the option 'enable' to true, > # and specify a station (e.g., 'KORHOODR3') and password. > # To guard against parsing errors, put the password in quotes. > enable = false > station = replace_me > password = replace_me > > # If you plan on using wunderfixer, set the following > # to your API key: > api_key = replace_me > > # Set the following to True to have weewx use the WU "Rapidfire" > # protocol. Not all hardware can support it. See the User's Guide. > rapidfire = False > > > ############################################################################## > > # This section specifies what reports, using which skins, to generate. > > [StdReport] > > # Where the skins reside, relative to WEEWX_ROOT > SKIN_ROOT = skins > > # Where the generated reports should go, relative to WEEWX_ROOT > HTML_ROOT = public_html > > # The database binding indicates which data should be used in reports. > data_binding = wx_binding > > # Whether to log a successful operation > log_success = True > > # Whether to log an unsuccessful operation > log_failure = False > > # Each of the following subsections defines a report that will be run. > # See the customizing guide to change the units, plot types and line > # colors, modify the fonts, display additional sensor data, and other > # customizations. Many of those changes can be made here by overriding > # parameters, or by modifying templates within the skin itself. > > [[SeasonsReport]] > # The SeasonsReport uses the 'Seasons' skin, which contains the > # images, templates and plots for the report. > skin = Seasons > enable = false > > [[SmartphoneReport]] > # The SmartphoneReport uses the 'Smartphone' skin, and the images > and > # files are placed in a dedicated subdirectory. > skin = Smartphone > enable = false > HTML_ROOT = public_html/smartphone > > [[MobileReport]] > # The MobileReport uses the 'Mobile' skin, and the images and files > # are placed in a dedicated subdirectory. > skin = Mobile > enable = False > HTML_ROOT = public_html/mobile > > [[StandardReport]] > # This is the old "Standard" skin. By default, it is not enabled. > skin = Standard > enable = True > > [[FTP]] > # FTP'ing the results to a webserver is treated as just another > report, > # albeit one with an unusual report generator! > skin = Ftp > > # If you wish to use FTP, set "enable" to "true", then > # fill out the next four lines. > # Use quotes around passwords to guard against parsing errors. > enable = false > user = replace_me > password = replace_me > server = replace_me # The ftp server name, e.g, > www.myserver.org > path = replace_me # The destination directory, e.g., /weather > > # Set to True for an FTP over TLS (FTPS) connection. Not all > servers > # support this. > secure_ftp = False > > # To upload files from something other than what HTML_ROOT is set > # to above, specify a different HTML_ROOT here. > #HTML_ROOT = public_html > > # Most FTP servers use port 21 > port = 21 > > # Set to 1 to use passive mode, zero for active mode > passive = 1 > > [[RSYNC]] > # rsync'ing to a webserver is treated as just another report > skin = Rsync > > # If you wish to use rsync, you must configure passwordless ssh > using > # public/private key authentication from the user account that > weewx > # runs to the user account on the remote machine where the files > # will be copied. > # > # If you wish to use rsync, set "enable" to "true", then > # fill out server, user, and path. > # The server should appear in your .ssh/config file. > # The user is the username used in the identity file. > # The path is the destination directory, such as > /var/www/html/weather. > # Be sure that the user has write permissions on the destination! > enable = false > server = replace_me > user = replace_me > path = replace_me > > # To upload files from something other than what HTML_ROOT is set > # to above, specify a different HTML_ROOT here. > #HTML_ROOT = public_html > > # Rsync can be configured to remove files from the remote server if > # they don't exist under HTML_ROOT locally. USE WITH CAUTION: if > you > # make a mistake in the remote path, you could could > unintentionally > # cause unrelated files to be deleted. Set to 1 to enable remote > file > # deletion, zero to allow files to accumulate remotely. > delete = 0 > > #### > > # Various options for customizing your reports. > > [[Defaults]] > > [[[Units]]] > > # The following section sets what unit to use for each unit > group. > # NB: The unit is always in the singular. I.e., > 'mile_per_hour', > # NOT 'miles_per_hour' > [[[[Groups]]]] > > group_altitude = foot # Options are 'foot' or 'meter' > group_degree_day = degree_F_day # Options are > 'degree_F_day' or 'degree_C_day' > group_distance = mile # Options are 'mile' or 'km' > group_pressure = inHg # Options are 'inHg', 'mmHg', > 'mbar', or 'hPa' > group_rain = inch # Options are 'inch', 'cm', or 'mm' > group_rainrate = inch_per_hour # Options are > 'inch_per_hour', 'cm_per_hour', or 'mm_per_hour' > group_speed = mile_per_hour # Options are > 'mile_per_hour', 'km_per_hour', 'knot', or 'meter_per_second' > group_speed2 = mile_per_hour2 # Options are > 'mile_per_hour2', 'km_per_hour2', 'knot2', or 'meter_per_second2' > group_temperature = degree_F # Options are 'degree_F' > or 'degree_C' > > # The following section sets the formatting for each type of > unit. > [[[[StringFormats]]]] > > centibar = %.0f > cm = %.2f > cm_per_hour = %.2f > degree_C = %.1f > degree_F = %.1f > degree_compass = %.0f > foot = %.0f > hPa = %.1f > hour = %.1f > inHg = %.3f > inch = %.2f > inch_per_hour = %.2f > km = %.1f > km_per_hour = %.0f > km_per_hour2 = %.1f > knot = %.0f > knot2 = %.1f > mbar = %.1f > meter = %.0f > meter_per_second = %.1f > meter_per_second2 = %.1f > mile = %.1f > mile_per_hour = %.0f > mile_per_hour2 = %.1f > mm = %.1f > mmHg = %.1f > mm_per_hour = %.1f > percent = %.0f > second = %.0f > uv_index = %.1f > volt = %.1f > watt_per_meter_squared = %.0f > NONE = " N/A" > > # The following section overrides the label used for each type > of unit > [[[[Labels]]]] > > meter = " meter", " meters" # You may prefer "metre". > day = " day", " days" > hour = " hour", " hours" > minute = " minute", " minutes" > second = " second", " seconds" > NONE = "" > > # The following section sets the format for each time scale. > # The values below will work in every locale, but they may not > look > # particularly attractive. > [[[[TimeFormats]]]] > > hour = %H:%M > day = %X > week = %X (%A) > month = %x %X > year = %x %X > rainyear = %x %X > current = %x %X > ephem_day = %X > ephem_year = %x %X > > [[[[Ordinates]]]] > > # Ordinal directions. The last one is for no wind direction > directions = N, NNE, NE, ENE, E, ESE, SE, SSE, S, SSW, SW, > WSW, W, WNW, NW, NNW, N/A > > # The following section sets the base temperatures used for the > # calculation of heating, cooling, and growing degree-days. > [[[[DegreeDays]]]] > > # Base temperature for heating days, with unit: > heating_base = 65, degree_F > # Base temperature for cooling days, with unit: > cooling_base = 65, degree_F > # Base temperature for growing days, with unit: > growing_base = 50, degree_F > > # A trend takes a difference across a time period. The > following > # section sets the time period, and how big an error is > allowed to > # still be counted as the start or end of a period. > [[[[Trend]]]] > > time_delta = 10800 # 3 hours > time_grace = 300 # 5 minutes > > # The labels to be used for each observation type > [[[Labels]]] > > # Set to hemisphere abbreviations suitable for your location: > hemispheres = N, S, E, W > > # Formats to be used for latitude whole degrees, longitude > whole > # degrees, and minutes: > latlon_formats = %02d, %03d, %05.2f > > # Generic labels, keyed by an observation type. > [[[[Generic]]]] > barometer = Barometer > dewpoint = Dew Point > ET = ET > heatindex = Heat Index > inHumidity = Inside Humidity > inTemp = Garage Temperature > outHumidity = Humidity > outTemp = Outside Temperature > radiation = Radiation > rain = Rain > rainRate = Rain Rate > UV = UV Index > windDir = Wind Direction > windGust = Gust Speed > windGustDir = Gust Direction > windSpeed = Wind Speed > windchill = Wind Chill > windgustvec = Gust Vector > windvec = Wind Vector > extraTemp1 = Temperature1 > extraTemp2 = Temperature2 > extraTemp3 = Temperature3 > > # Sensor status indicators > > rxCheckPercent = Signal Quality > txBatteryStatus = Transmitter Battery > windBatteryStatus = Wind Battery > rainBatteryStatus = Rain Battery > outTempBatteryStatus = Outside Temperature Battery > inTempBatteryStatus = Inside Temperature Battery > consBatteryVoltage = Console Battery > heatingVoltage = Heating Battery > supplyVoltage = Supply Voltage > referenceVoltage = Reference Voltage > > [[[Almanac]]] > > # The labels to be used for the phases of the moon: > moon_phases = New, Waxing crescent, First quarter, Waxing > gibbous, Full, Waning gibbous, Last quarter, Waning crescent > > > ############################################################################## > > # This service acts as a filter, converting the unit system coming from > # the hardware to a unit system in the database. > > [StdConvert] > > # The target_unit affects only the unit system in the database. Once > # chosen it cannot be changed without converting the entire database. > # Modification of target_unit after starting weewx will result in > # corrupt data - the database will contain a mix of US and METRIC data. > # > # The value of target_unit does not affect the unit system for > # reporting - reports can display US, Metric, or any combination of > units. > # > # In most cases, target_unit should be left as the default: US > # > # In particular, those migrating from a standard wview installation > # should use US since that is what the wview database contains. > > # DO NOT MODIFY THIS VALUE UNLESS YOU KNOW WHAT YOU ARE DOING! > target_unit = US # Options are 'US', 'METRICWX', or 'METRIC' > > > ############################################################################## > > # This section can adjust data using calibration expressions. > > [StdCalibrate] > > [[Corrections]] > # For each type, an arbitrary calibration expression can be given. > # It should be in the units defined in the StdConvert section. > # Example: > foo = foo + 0.2 > > > ############################################################################## > > # This section is for quality control checks. If units are not specified, > # values must be in the units defined in the StdConvert section. > > [StdQC] > > [[MinMax]] > barometer = 26, 32.5, inHg > pressure = 24, 34.5, inHg > outTemp = -40, 120, degree_F > inTemp = 10, 120, degree_F > outHumidity = 0, 100 > inHumidity = 0, 100 > windSpeed = 0, 120, mile_per_hour > rain = 0, 10, inch > > > ############################################################################## > > # This section controls the origin of derived values. > > [StdWXCalculate] > > [[Calculations]] > # How to calculate derived quantities. Possible values are: > # hardware - use the value provided by hardware > # software - use the value calculated by weewx > # prefer_hardware - use value provide by hardware if available, > # otherwise use value calculated by weewx > > pressure = prefer_hardware > altimeter = prefer_hardware > appTemp = prefer_hardware > barometer = prefer_hardware > beaufort = prefer_hardware > cloudbase = prefer_hardware > dewpoint = prefer_hardware > ET = prefer_hardware > heatindex = prefer_hardware > humidex = prefer_hardware > inDewpoint = prefer_hardware > maxSolarRad = prefer_hardware > rainRate = prefer_hardware > windchill = prefer_hardware > windrun = prefer_hardware > > > ############################################################################## > > # For hardware that supports it, this section controls how often the > # onboard clock gets updated. > > [StdTimeSynch] > > # How often to check the weather station clock for drift (in seconds) > clock_check = 14400 > > # How much it can drift before we will correct it (in seconds) > max_drift = 5 > > > ############################################################################## > > # This section is for configuring the archive service. > > [StdArchive] > > # If the station hardware supports data logging then the archive > interval > # will be downloaded from the station. Otherwise, specify it (in > seconds). > archive_interval = 300 > > # If possible, new archive records are downloaded from the station > # hardware. If the hardware does not support this, then new archive > # records will be generated in software. > # Set the following to "software" to force software record generation. > record_generation = hardware > > # Whether to include LOOP data in hi/low statistics > loop_hilo = True > > # The data binding used to save archive records > data_binding = wx_binding > > > ############################################################################## > > # This section binds a data store to a database. > > [DataBindings] > > [[wx_binding]] > # The database must match one of the sections in [Databases]. > # This is likely to be the only option you would want to change. > database = archive_mysql > # The name of the table within the database > table_name = archive > # The manager handles aggregation of data for historical summaries > manager = weewx.manager.DaySummaryManager > # The schema defines the structure of the database. > # It is *only* used when the database is created. > schema = schemas.wview_extended.schema > [[purpleair_binding]] > manager = weewx.manager.DaySummaryManager > schema = user.purpleair.schema > table_name = archive > database = purpleair_sqlite > > > ############################################################################## > > # This section defines various databases. > > [Databases] > > # A SQLite database is simply a single file > [[archive_sqlite]] > database_name = weewx.sdb > database_type = SQLite > > # MySQL > [[archive_mysql]] > database_name = weewxarchive > database_type = MySQL > [[purpleair_sqlite]] > database_name = purpleair.sdb > database_type = SQLite > > > ############################################################################## > > # This section defines defaults for the different types of databases. > > [DatabaseTypes] > > # Defaults for SQLite databases > [[SQLite]] > driver = weedb.sqlite > # Directory in which the database files are located > SQLITE_ROOT = %(WEEWX_ROOT)s/archive > > # Defaults for MySQL databases > [[MySQL]] > driver = weedb.mysql > # The host where the database is located > host = localhost > # The user name for logging in to the host > user = weewx > # The password for the user name (quotes guard against parsing > errors) > password = ***HIDDEN FROM PUBLIC VIEW*** > > > ############################################################################## > > # This section configures the internal weewx engine. > > [Engine] > > [[Services]] > # This section specifies the services that should be run. They are > # grouped by type, and the order of services within each group > # determines the order in which the services will be run. > prep_services = weewx.engine.StdTimeSynch > data_services = , > process_services = weewx.engine.StdConvert, > weewx.engine.StdCalibrate, weewx.engine.StdQC, > weewx.wxservices.StdWXCalculate, user.purpleair.PurpleAirMonitor > archive_services = weewx.engine.StdArchive > restful_services = weewx.restx.StdStationRegistry, > weewx.restx.StdWunderground, weewx.restx.StdPWSweather, > weewx.restx.StdCWOP, weewx.restx.StdWOW, weewx.restx.StdAWEKAS > report_services = weewx.engine.StdPrint, weewx.engine.StdReport > > > ############################################################################## > > # Options for extension 'purpleair' > [PurpleAirMonitor] > data_binding = purpleair_binding > hostname = 173.11.83.165 > port = 22226 > > > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/77d4b13d-9349-4eda-a641-bfa2ba1a1426n%40googlegroups.com.
