I had a look at: https://weather.gladstonefamily.net/site/search?site=F8519;Get%20information=Get%20information;days=3#Data
And I see the following. Is this the issue you are seeing? How long have you waited? Not enough data has been received to perform a day / night analysis to check for various types of shielding problems. Please wait a few days, and then try again. > On Nov 5, 2020, at 6:18 PM, Lewis McCallum <[email protected]> wrote: > > Hi John, > > I'll give that forum a go, thanks for that. > > And yeah, I have also seen a lot of people on various forums complaining > about the quality of the analysis. It just surprised me that no station in > the UK (or anywhere in the world I checked outside of North America actually) > seems to have it up and running, so I've been obsessively trying to get to > the bottom of it. > > My CWOP station is FW8519 - (and meikleobney.net if you're interested :) ) > > Lewis > >> On Friday, 6 November 2020 at 02:08:43 UTC [email protected] wrote: >> A good place to ask is here: >> https://www.wxforum.net/index.php?board=15.0 >> >> You may be disappointed when you do get his working as the reports have been >> wacky for some time (although, very recently, they seem to be better). >> >> You don’t mention your station. Would you share it? >> >> Cheers, >> John >> >>>> On Nov 5, 2020, at 5:26 PM, Lewis McCallum <[email protected]> wrote: >>>> >>> Hi all, >> >>> >>> So this isn't exactly a weewx question, but I'm just looking for knowledge >>> from people who understand a bit about uploading to CWOP/MADIS. MADIS >>> support has been super dismissive of my questions (short single-sentence >>> replies to my emails) so I'm just looking for some info. I know there's a >>> lot of pretty knowledgeable people on here who use the services I'm asking >>> about, so I thought I'd ask here. >>> >>> In particular, I'm interested in the MADIS quality checks that are run. If >>> you upload to CWOP you eventually get a site on gladstonefamily.net where >>> you can track the quality checks of your data and then potentially improve >>> your data quality over time. However, I was disappointed to see my station >>> (UK) wasn't showing full analysis. I don't have an average error/standard >>> deviation for any variable. I then did some exploring and discovered that I >>> could find no UK station which does show this info. All US stations I >>> checked, however, gave full analysis. >>> >>> I emailed to ask and got a blunt single sentence response from MADIS saying >>> "US and UK treated the same". I did some exploring of the actual raw MADIS >>> QC data and discovered that for all UK stations I checked (once I'd >>> translated the annoying bitmasks), none of them had had a "Stage 3" check >>> carried out, while all US stations I checked did have this check (where, to >>> my knowledge, stage 3 is the stage which compares station data to the >>> network of other stations and produces the error in your data for each >>> observation). I've pointed this out to MADIS support but believe I am now >>> being ignored for pestering them so much. >>> >>> Essentially I've come here to ask if anyone has a good understanding of the >>> MADIS quality check system, and can explain to me why only North American >>> stations are getting Stage 3 checks carried out. There must be a valid >>> reason for this, but it's frustrating to just be told by MADIS that "there >>> is no difference" when there clearly is. I was looking forward to improving >>> my data quality and it looks like I just sort of can't because MADIS isn't >>> doing the checks that they seem to be claiming to carry out. >>> >>> Can anyone shed some light? >>> >>> Many thanks, >>> >>> Lewis >>> >>> >> >>> -- >>> You received this message because you are subscribed to the Google Groups >>> "weewx-user" group. >>> To unsubscribe from this group and stop receiving emails from it, send an >>> email to [email protected]. >>> To view this discussion on the web visit >>> https://groups.google.com/d/msgid/weewx-user/becf7aeb-810c-410d-8dde-cb8fb3a9a670n%40googlegroups.com. > > -- > You received this message because you are subscribed to the Google Groups > "weewx-user" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/weewx-user/d4da287b-46cb-4c82-aac8-ca9f845b2192n%40googlegroups.com. -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/0F8EFA09-028B-41FC-96BC-83C577CBC418%40johnkline.com.
