After running several hours the fog has clear regarding the two N/A s for pressure and wind speed. Its working. Thanks a lot
[email protected] schrieb am Dienstag, 24. November 2020 um 01:04:25 UTC+1: > Thanks a lot, this saved a lot. Two (minor) issues remained: > 1) my Rankforce 2310 is using an+ special kind of USB chip the Raspbian OS > binds as /dev/usb/hiddev0 instead of the standard USB /dev/ttyUSB0 or > similar. A "port = /dev/ttyUSB0" is necessary. > 2) Barometer and Wind speed / direction shows N/A on the web page. The > debug data are correct. - some idea? > Anyway I keep looking for the solution. I started to convert the > python2 to python3 code, but problem is persistent. > Greetings > > [email protected] schrieb am Montag, 23. November 2020 um 13:55:51 > UTC+1: > >> I'm using the WH23xx with Python 3, but one has to use a beta version from >> https://github.com/EdwinGH/weewx-wh23xx >> >> See also my post some threads before... Just in case you also want to use >> forecast. >> >> [email protected] schrieb am Sonntag, 22. November 2020 um 15:29:22 >> UTC+1: >> >>> Hi, >>> reinstalling the weewx on a Raspberry Pi 1B is not running at all. >>> Following all guide lines for installing weewx on an Debian based linux as >>> well as Matthew Wall´s guide line on Github - it is just not working. >>> One point I am puzzled is that the driver WH23xx is not presented in the >>> driver menue shown in wee_config. In weewx.con there is not section for >>> WH23xx. Unfortuantely I lost the config file of my older installation. >>> OS = Raspian OS lite >>> Python 3.7 >>> >>> Some advice? >>> Greetings >>> Harry >>> >> -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/2408d9aa-191a-4cf1-ac72-650f36330d6dn%40googlegroups.com.
