Not sure if I should ask this here or start a new conversation but I've got a question about how WeeWX deals with reporting UV Index.
The console that comes with these 5in1 and 6in1 stations has the capability of reporting UV Index as required by the 6in1 station with a UV sensor. With the 5in1 station, which doesn't have a UV sensor, it is outputting a value of zero. This gets picked up by WeeWX and is reported as 0.0. My question is can I "turn off" WeeWX reporting this erroneous UV Index? Paul On Tuesday, 24 November 2020 at 20:11:35 UTC Paul Eaton wrote: > Many thanks Bob, that did the trick. > > Just set up on Weathercloud. ID = d0878973678 if you're interested. > > Have a nice evening. > > Regards, Paul > > On Tuesday, 24 November 2020 at 17:23:59 UTC Bob Atchley wrote: > >> Hi Paul, >> >> Within the weewx.conf file In the WS6in1 driver section simply add "model >> = abc" as an additional parameter, replacing abc with whatever you want to >> call it. >> So mine reads: >> [WS6in1] >> # This section is for the 6in1 series of weather stations. >> # model - this is optional >> model = Youshiko YC9388 (WS6in1) >> >> # The driver to use: >> driver = user.ws6in1 >> >> Hope this helps >> >> Regards >> >> Bob >> > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/343b74f0-888e-4197-8ec8-ba8d8c154a5en%40googlegroups.com.
