Thank you for producing this app and allowing the specification of topic. It works fine for me, for a number of variables. However, I use METRICWX in weewx, with rain in mm and wind in m/s. We haven't had any rain yet to test this, but my wind and gust speeds are both permanently zero. Do you have any plans to support METRICWX or to allow choice of units by some other means? Also, is there any way of displaying my radiation and UV data?
Thanks. On Wednesday, 9 December 2020 at 16:39:23 UTC [email protected] wrote: > I did. Since then I have tried the following. > 1. Publish as metric and change the application configuration back to > metric. > 2. Only publish outTemp_C and configure only an ‘Outside Temperature’ > gauge. > I’m sure I’m missing something obvious. I’ll keep experimenting. > rich > > On Wednesday, 9 December 2020 at 05:54:49 UTC-5 [email protected] wrote: > >> In the application configuration have you turned your station units to >> imperial? (I think they default to metric) >> >> That would make a difference between looking for example between >> heatindex_F and headindex_C which is part of the whole topic string >> >> >> Thanks >> >> On Tue, Dec 8, 2020 at 7:44 PM [email protected] <[email protected]> >> wrote: >> >>> >>> Interesting. The first time I clicked on the link it only installed >>> TestFlight. But I digress. I must be doing something wrong. I get the >>> green dot, so I think I am connected. I entered weather/individual as my >>> topic. >>> Here is some output from some test code >>> Connected with result code 0 >>> Connected flags {'session present': 0} >>> Subscribing to weather/individual/# has a mid 1 and rc 0 >>> Subscribed to topic mid: 1 is size 1 has a QOS of 0 >>> topic: weather/individual/monthET >>> payload: b'"0.11"' >>> topic: weather/individual/heatindex_F >>> payload: b'"22.5"' >>> topic: weather/individual/outHumidity >>> payload: b'"86.0"' >>> topic: weather/individual/dayET >>> payload: b'"0.006"' >>> topic: weather/individual/maxSolarRad_Wpm2 >>> payload: b'"0.0"' >>> topic: weather/individual/consBatteryVoltage_volt >>> payload: b'"4.54"' >>> topic: weather/individual/monthRain_in >>> payload: b'"0.14"' >>> topic: weather/individual/insideAlarm >>> payload: b'"0.0"' >>> topic: weather/individual/barometer_inHg >>> payload: b'"29.282"' >>> topic: weather/individual/dayRain_in >>> payload: b'"0.0"' >>> topic: weather/individual/stormRain_in >>> payload: b'"0.0"' >>> topic: weather/individual/sunrise >>> payload: b'"1607429520.0"' >>> topic: weather/individual/windchill_F >>> payload: b'"22.5"' >>> topic: weather/individual/dewpoint_F >>> payload: b'"18.9577377882"' >>> topic: weather/individual/outsideAlarm1 >>> payload: b'"0.0"' >>> topic: weather/individual/soilLeafAlarm2 >>> payload: b'"0.0"' >>> topic: weather/individual/outsideAlarm2 >>> payload: b'"0.0"' >>> topic: weather/individual/radiation_Wpm2 >>> payload: b'"0.0"' >>> topic: weather/individual/forecastRule >>> payload: b'"192.0"' >>> topic: weather/individual/rainAlarm >>> payload: b'"0.0"' >>> topic: weather/individual/inTemp_F >>> payload: b'"67.4"' >>> topic: weather/individual/inHumidity >>> payload: b'"38.0"' >>> topic: weather/individual/windSpeed10_mph >>> payload: b'"0.0"' >>> topic: weather/individual/yearRain_in >>> payload: b'"23.37"' >>> topic: weather/individual/inDewpoint_F >>> payload: b'"40.9048059523 <(904)%20805-9523>"' >>> topic: weather/individual/extraAlarm1 >>> payload: b'"0.0"' >>> topic: weather/individual/extraAlarm2 >>> payload: b'"0.0"' >>> topic: weather/individual/extraAlarm3 >>> payload: b'"0.0"' >>> topic: weather/individual/extraAlarm4 >>> payload: b'"0.0"' >>> topic: weather/individual/extraAlarm5 >>> payload: b'"0.0"' >>> topic: weather/individual/extraAlarm6 >>> payload: b'"0.0"' >>> topic: weather/individual/extraAlarm7 >>> payload: b'"0.0"' >>> topic: weather/individual/extraAlarm8 >>> payload: b'"0.0"' >>> topic: weather/individual/rainRate_inch_per_hour >>> payload: b'"0.0"' >>> topic: weather/individual/rain_in >>> payload: b'"0.0"' >>> topic: weather/individual/humidex_F >>> payload: b'"22.5"' >>> topic: weather/individual/forecastIcon >>> payload: b'"18.0"' >>> topic: weather/individual/pressure_inHg >>> payload: b'"28.7311013367"' >>> topic: weather/individual/soilLeafAlarm4 >>> payload: b'"0.0"' >>> topic: weather/individual/trendIcon >>> payload: b'"0.0"' >>> topic: weather/individual/altimeter_inHg >>> payload: b'"29.2387383925"' >>> topic: weather/individual/soilLeafAlarm3 >>> payload: b'"0.0"' >>> topic: weather/individual/usUnits >>> payload: b'"1.0"' >>> topic: weather/individual/soilLeafAlarm1 >>> payload: b'"0.0"' >>> topic: weather/individual/leafWet4 >>> payload: b'"0.0"' >>> topic: weather/individual/yearET >>> payload: b'"25.01"' >>> topic: weather/individual/txBatteryStatus >>> payload: b'"0.0"' >>> topic: weather/individual/appTemp_F >>> payload: b'"17.4069618021 <(406)%20961-8021>"' >>> topic: weather/individual/UV >>> payload: b'"0.0"' >>> topic: weather/individual/dateTime >>> payload: b'"1607474098.0"' >>> topic: weather/individual/outTemp_F >>> payload: b'"22.5"' >>> topic: weather/individual/windSpeed_mph >>> payload: b'"0.0"' >>> topic: weather/individual/sunset >>> payload: b'"1607464200.0"' >>> topic: weather/individual/windGust_mph >>> payload: b'"0.0"' >>> topic: weather/individual/cloudbase_foot >>> payload: b'"1295.05959359"' >>> topic: weather/individual/hourRain_in >>> payload: b'"0.0"' >>> topic: weather/individual/rain24_in >>> payload: b'"0.0"' >>> Exception in thread Thread-4: >>> Traceback (most recent call last): >>> File >>> "/var/containers/Bundle/Application/98214C3F-7429-489D-8C5B-62EBF1A92501/Pythonista3.app/Frameworks/Py3Kit.framework/pylib/threading.py", >>> >>> line 917, in _bootstrap_inner >>> self.run() >>> File >>> "/var/containers/Bundle/Application/98214C3F-7429-489D-8C5B-62EBF1A92501/Pythonista3.app/Frameworks/Py3Kit.framework/pylib/threading.py", >>> >>> line 865, in run >>> self._target(*self._args, **self._kwargs) >>> File >>> "/private/var/mobile/Containers/Shared/AppGroup/03C7B2FF-1C6F-474E-A5E4-35A11C6986BE/Pythonista3/Documents/site-packages-3/paho/mqtt/client.py", >>> >>> line 3428, in _thread_main >>> self.loop_forever(retry_first_connection=True) >>> File >>> "/private/var/mobile/Containers/Shared/AppGroup/03C7B2FF-1C6F-474E-A5E4-35A11C6986BE/Pythonista3/Documents/site-packages-3/paho/mqtt/client.py", >>> >>> line 1782, in loop_forever >>> rc = self.loop(timeout, max_packets) >>> File >>> "/private/var/mobile/Containers/Shared/AppGroup/03C7B2FF-1C6F-474E-A5E4-35A11C6986BE/Pythonista3/Documents/site-packages-3/paho/mqtt/client.py", >>> >>> line 1163, in loop >>> socklist = select.select(rlist, wlist, [], timeout) >>> KeyboardInterrupt >>> >>> >>> On Tuesday, 8 December 2020 at 19:23:48 UTC-5 [email protected] wrote: >>> >>>> *https://testflight.apple.com/join/EPwi6NBP >>>> <https://testflight.apple.com/join/EPwi6NBP>* <-- This is the link. >>>> (also in the previous post) you can visit it from your iOS device and it >>>> will open testflight and ask you to open the application, etc. >>>> >>>> On Tuesday, December 8, 2020 at 7:20:46 PM UTC-5 [email protected] >>>> wrote: >>>> >>>>> OK, I’m new to this. I’ve installed TestFlight, but it seems like I >>>>> need a link or something to your app... >>>>> rich >>>>> >>>>> On Tuesday, 8 December 2020 at 17:14:52 UTC-5 [email protected] wrote: >>>>> >>>>>> TestFlight link for testing the build: >>>>>> https://testflight.apple.com/join/EPwi6NBP >>>>>> >>>>>> Let me know if that works for you with the custom topic name and I >>>>>> will push to the Apple store if it does. >>>>>> >>>>>> On Mon, Dec 7, 2020 at 17:26 Constantine Samaklis <[email protected]> >>>>>> wrote: >>>>>> >>>>>>> I have submitted a new build where the topic can be specified. As >>>>>>> soon as it gets approved, I will post a link where you can use >>>>>>> testflight >>>>>>> for you to test it and see if it works as expected. >>>>>>> >>>>>>> On Sunday, December 6, 2020 at 7:42:20 PM UTC-5 [email protected] >>>>>>> wrote: >>>>>>> >>>>>>>> This looks really cool. I too am anxiously awaiting to be able to >>>>>>>> specify the topic. In my case, I am publishing json loop data to >>>>>>>> weather/loop, json archive data to weather/archive, both to >>>>>>>> weather/looparchive. So if I could specify something like >>>>>>>> weather/loop-individual/#... but I could easily publish to almost >>>>>>>> anything >>>>>>>> but weather/#. >>>>>>>> Again, thanks for sharing! If I can help in any way, let me know. >>>>>>>> rich >>>>>>>> >>>>>>>> On Sunday, 6 December 2020 at 18:37:04 UTC-5 [email protected] >>>>>>>> wrote: >>>>>>>> >>>>>>>>> Ok understood; my topics are published as weather/corbett and >>>>>>>>> weather/williams for different locations. I look forward to that >>>>>>>>> enhancement! This looks like a cool app. >>>>>>>>> >>>>>>>>> On Dec 6, 2020, at 3:27 PM, Constantine Samaklis < >>>>>>>>> [email protected]> wrote: >>>>>>>>> >>>>>>>>> Currently no. It defaults to weather/#. The gauges are also >>>>>>>>> limited to the topics published by the MQTT extension so for example >>>>>>>>> if you >>>>>>>>> have configured the extension to run in metric, you will >>>>>>>>> have weather/windchill_C for windchill and if you have it configured >>>>>>>>> for >>>>>>>>> imperial units, then it will listen for weather/windchill_F. >>>>>>>>> >>>>>>>>> >>>>>>>>> The pattern is similar across all the available gauges. >>>>>>>>> >>>>>>>>> I have also left some topics as soil alarm and other alarm ones >>>>>>>>> out, as they are present only in professional weather stations such >>>>>>>>> as >>>>>>>>> Vantage Pro, and have not seen them used, outside of farming >>>>>>>>> applications. >>>>>>>>> (On my todo list at some point though.) >>>>>>>>> >>>>>>>>> On Sunday, December 6, 2020 at 6:15:19 PM UTC-5 [email protected] >>>>>>>>> wrote: >>>>>>>>> >>>>>>>>>> I love this! Is there a way to change the topic name to look >>>>>>>>>> for? >>>>>>>>>> >>>>>>>>>> On Dec 6, 2020, at 12:42 PM, Christopher Joseph Alemany < >>>>>>>>>> [email protected]> wrote: >>>>>>>>>> >>>>>>>>>> Very cool! Thank you Constantine and great work! I’ll install >>>>>>>>>> the mqtt extension just for this. Consider this friendly and >>>>>>>>>> appreciative >>>>>>>>>> encouragement to port it to Swift! >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> Cheers >>>>>>>>>> Chris >>>>>>>>>> www.Alberniweather.ca >>>>>>>>>> “They always tell me it takes time. How much more time do you >>>>>>>>>> want...for your progress?” >>>>>>>>>> James Baldwin >>>>>>>>>> >>>>>>>>>> Chris Alemany >>>>>>>>>> 3854 6th Ave >>>>>>>>>> Port Alberni, BC >>>>>>>>>> V9Y4M2 >>>>>>>>>> h:250-723-0889 >>>>>>>>>> w: 250-753-3245 x2106 <250-753-3245;2106> >>>>>>>>>> e: [email protected] >>>>>>>>>> w: www.chrisalemany.ca >>>>>>>>>> w: www.alberniweather.ca >>>>>>>>>> w: www.vifreightbyrail.ca >>>>>>>>>> >>>>>>>>>> On Dec 6, 2020, at 08:30, Constantine Samaklis <[email protected]> >>>>>>>>>> wrote: >>>>>>>>>> >>>>>>>>>> I have been using WeeWX for seven years or so and I have been >>>>>>>>>> inspired by the work that Tom and others have put into making this >>>>>>>>>> software >>>>>>>>>> better and also expandable. >>>>>>>>>> >>>>>>>>>> Ever since I added the MQTT extension to WeeWX I was able to >>>>>>>>>> incorporate live weather data from my Vantage Pro weather station, >>>>>>>>>> which I >>>>>>>>>> think it is very cool. >>>>>>>>>> >>>>>>>>>> I wanted to give back something to the community, so I spent some >>>>>>>>>> time writing a GUI in Pythonista on my iPad, and I have ported it >>>>>>>>>> over to >>>>>>>>>> the Apple store as a free application, in hopes that it can be >>>>>>>>>> useful to >>>>>>>>>> others. >>>>>>>>>> >>>>>>>>>> I am always mesmerized by moving dials and I also find that the >>>>>>>>>> application, apart from giving you quick access to your weather >>>>>>>>>> station's >>>>>>>>>> data, it looks quite good as a make shift screen, especially on >>>>>>>>>> larger iPad >>>>>>>>>> screens. :-) >>>>>>>>>> >>>>>>>>>> You can fetch the application from the app store from the below >>>>>>>>>> link or look for "weather mqtt" >>>>>>>>>> >>>>>>>>>> https://apps.apple.com/us/app/weather-mqtt/id1542679289 >>>>>>>>>> >>>>>>>>>> I have also put together a quick user guide at; >>>>>>>>>> https://www.samaklis.com/confluence/display/WEAT/2020/12/05/Weather+MQTT+Support >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> PS The application is a port from Python to Objective C, so you >>>>>>>>>> may experience a crash from time to time as it is not OS native. I >>>>>>>>>> am in >>>>>>>>>> the process of looking into SWIFT and in time, based on community >>>>>>>>>> interest, >>>>>>>>>> I will try and put some work on porting the application to it. so it >>>>>>>>>> is iOS >>>>>>>>>> native. >>>>>>>>>> >>>>>>>>>> Thanks again to all the weather enthusiasts out there that make >>>>>>>>>> applications like WeeWX possible. >>>>>>>>>> >>>>>>>>>> <IMG_0727.PNG> >>>>>>>>>> >>>>>>>>>> -- >>>>>>>>>> You received this message because you are subscribed to the >>>>>>>>>> Google Groups "weewx-user" group. >>>>>>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>>>>>> send an email to [email protected]. >>>>>>>>>> To view this discussion on the web visit >>>>>>>>>> https://groups.google.com/d/msgid/weewx-user/0084e413-3fac-446d-a8c1-7158db8ebb72n%40googlegroups.com >>>>>>>>>> >>>>>>>>>> <https://groups.google.com/d/msgid/weewx-user/0084e413-3fac-446d-a8c1-7158db8ebb72n%40googlegroups.com?utm_medium=email&utm_source=footer> >>>>>>>>>> . >>>>>>>>>> <IMG_0727.PNG> >>>>>>>>>> >>>>>>>>>> -- >>>>>>>>>> You received this message because you are subscribed to the >>>>>>>>>> Google Groups "weewx-user" group. >>>>>>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>>>>>> send an email to [email protected]. >>>>>>>>>> >>>>>>>>>> To view this discussion on the web visit >>>>>>>>>> https://groups.google.com/d/msgid/weewx-user/A0ED93AC-FC10-409C-B13C-CC6E2E2B5BE0%40gmail.com >>>>>>>>>> >>>>>>>>>> <https://groups.google.com/d/msgid/weewx-user/A0ED93AC-FC10-409C-B13C-CC6E2E2B5BE0%40gmail.com?utm_medium=email&utm_source=footer> >>>>>>>>>> . >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> -- >>>>>>>>> You received this message because you are subscribed to the Google >>>>>>>>> Groups "weewx-user" group. >>>>>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>>>>> send an email to [email protected]. >>>>>>>>> >>>>>>>>> To view this discussion on the web visit >>>>>>>>> https://groups.google.com/d/msgid/weewx-user/678c9f2e-2d82-4bb4-bea1-448ac1494c6an%40googlegroups.com >>>>>>>>> >>>>>>>>> <https://groups.google.com/d/msgid/weewx-user/678c9f2e-2d82-4bb4-bea1-448ac1494c6an%40googlegroups.com?utm_medium=email&utm_source=footer> >>>>>>>>> . >>>>>>>>> >>>>>>>>> -- >>>>>>> >>>>>> You received this message because you are subscribed to a topic in >>>>>>> the Google Groups "weewx-user" group. >>>>>>> To unsubscribe from this topic, visit >>>>>>> https://groups.google.com/d/topic/weewx-user/Vp4-lsjcDko/unsubscribe >>>>>>> . >>>>>>> To unsubscribe from this group and all its topics, send an email to >>>>>>> [email protected]. >>>>>>> To view this discussion on the web visit >>>>>>> https://groups.google.com/d/msgid/weewx-user/c2ccd9cc-d929-40cc-a851-cc0d839d98ben%40googlegroups.com >>>>>>> >>>>>>> <https://groups.google.com/d/msgid/weewx-user/c2ccd9cc-d929-40cc-a851-cc0d839d98ben%40googlegroups.com?utm_medium=email&utm_source=footer> >>>>>>> . >>>>>>> >>>>>> -- >>> You received this message because you are subscribed to a topic in the >>> Google Groups "weewx-user" group. >>> To unsubscribe from this topic, visit >>> https://groups.google.com/d/topic/weewx-user/Vp4-lsjcDko/unsubscribe. >>> To unsubscribe from this group and all its topics, send an email to >>> [email protected]. >>> >> To view this discussion on the web visit >>> https://groups.google.com/d/msgid/weewx-user/9700a618-3586-43f2-9226-eb9a70c98616n%40googlegroups.com >>> >>> <https://groups.google.com/d/msgid/weewx-user/9700a618-3586-43f2-9226-eb9a70c98616n%40googlegroups.com?utm_medium=email&utm_source=footer> >>> . >>> >> -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/7750a243-da5e-462c-892d-156dfd731f1en%40googlegroups.com.
