Found the solution myself. In /etc/weewx/skins/Seasons/skin.conf I had to
add a line for the missing channel 4:
[[[daytemp]]]
yscale = None, None, 0.5
[[[[extraTemp1]]]]
[[[[extraTemp2]]]]
[[[[extraTemp3]]]]
* [[[[extraTemp4]]]]*
and for all other seasons week, month, and year, too
Stefan Ferber schrieb am Sonntag, 27. Dezember 2020 um 22:05:41 UTC+1:
> Thx for providing WeeWx - really impressed by the ease of installation and
> configuration options. Running for two weeks now ;-)
>
> I have 5 external sensors (temp, humidity, battery status) connected to my
> TE923. WeeWx is fetching the data correctly
> $ sudo wee_device --current
> Using configuration file /etc/weewx/weewx.conf
> Using TE923 driver version 0.41.1 (weewx.drivers.te923)
> Querying the station for current weather data...
> dateTime: 1609093626
> forecast: 0
> h_1: 64
> h_1_state: ok
> h_2: 38
> h_2_state: ok
> h_3: 41
> h_3_state: ok
> h_4: 47
> h_4_state: ok
> h_5: 37
> h_5_state: ok
> h_in: 36
> h_in_state: ok
> rain: 3087
> rain_state: ok
> slp: 948.625
> slp_state: ok
> storm: 0
> t_1: 2.7
> t_1_state: ok
> t_2: 22.1
> t_2_state: ok
> t_3: 20.8
> t_3_state: ok
> t_4: 21.6
> t_4_state: ok
> t_5: 20.8
> t_5_state: ok
> t_in: 22.85
> t_in_state: ok
> uv: None
> uv_state: no_link
> windchill: 1.9
> windchill_state: ok
> winddir: 2
> winddir_state: ok
> windgust: 0.0
> windgust_state: ok
> windspeed: 0.0
> windspeed_state: ok
>
> but the last channel 5 is not shown in the temperature graphs. The
> mapping is a little bit confusing but this graph should show 4 channels but
> is providing only 3 channels.
> [image: daytemp.png]
>
> Therefore, I added a new line for the missing channel "extraTemp4" in the
> weewx.conf
> and change the names to my rooms:
>
> # The labels to be used for each observation type
> [[[Labels]]]
>
> # Set to hemisphere abbreviations suitable for your location:
> hemispheres = N, S, E, W
>
> # Formats to be used for latitude whole degrees, longitude
> whole
> # degrees, and minutes:
> latlon_formats = %02d, %03d, %05.2f
>
> # Generic labels, keyed by an observation type.
> [[[[Generic]]]]
> barometer = Barometer
> <...>
> windvec = Wind Vector
> extraTemp1 = Living Room
> extraTemp2 = Kitchen
> extraTemp3 = Bath
> extraTemp4 = Kids Room
>
> But the report still contains only 3 channels.
> [image: daytemp (1).png]
>
>
> What do I have to do now?
>
>
>
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/weewx-user/22c34cf5-2254-4673-8ccd-e1927ee679d5n%40googlegroups.com.
