Also tried making sure that the barometer on the vantage vue console was
properly calibrated.
The value for altimeter continues to be 'None'. This used to work when I
ran it on a box I had ubuntu loaded on.
On Monday, January 4, 2021 at 3:21:20 PM UTC-8 Brent Dowell wrote:
> Well, I think I found something in restx.py.
>
> For CWOP, there is a line that says
> _baro = record.get('altimeter')
>
> Well, looking at my loop data there is no altimeter field in it.
> I do see in the startup that it says
> weewx.wxservices: The following values will be calculated:
> altimeter=prefer_hardware, appTemp=prefer_hardware,
> barometer=prefer_hardware, beaufort=prefer_hardware,
> cloudbase=prefer_hardware, dewpoint=prefer_hardware, ET=prefer_hardware,
> heatindex=prefer_hardware, humidex=prefer_hardware,
> inDewpoint=prefer_hardware, maxSolarRad=prefer_hardware,
> pressure=prefer_hardware, rainRate=prefer_hardware,
> windchill=prefer_hardware, windrun=prefer_hardware
> Jan 4 13:48:41 raspberrypi weewx[11987] INFO weewx.wxservices: The
> following algorithms will be used for calculations: altimeter=aaASOS,
> maxSolarRad=RS
>
> So, apparently, altimeter is something that is supposed to be calculated,
> but for whatever reason, when code tries to grab it for CWOP, it's set to
> 'None'.
>
> I've temporarily changed to code to point at barometer, but I'm guessing
> that's the wrong solution and what I need to figure out is why the data for
> altimeter is 'None'
>
> On Monday, January 4, 2021 at 2:21:10 PM UTC-8 Brent Dowell wrote:
>
>> A couple months ago I moved my weather station to run on a Raspberry pi,
>> and things have been running smoothly with the exception of the data that
>> gets uploaded to CWOP.
>>
>> I upload data to cwop, wunderground, pwsweather, and my own weather
>> site. The only one missing the data is cwop.
>>
>> I'm running weewx version 4.0.0b9 on python Python 2.7.16 with a vantage
>> vue weather station.
>>
>> I've attached below the cwop data, loop data, and syslog.
>>
>> Thanks in advance for any help.
>>
>>
>>
>> My raw data for cwop has a b..... for the barometric data.
>>
>> ------------------------------------------------------------------------------------------------------
>> {Manually
>> obfuscated}>APRS,TCPXX*,qAX,CWOP-4:@032150z3949.85N/11938.56W_315/009g014t050r000p000P000b.....h46.weewx-4.0.0b9-Vantage
>>
>>
>> Loop Data looks like:
>>
>> ------------------------------------------------------------------------------------------------------
>> LOOP: 2021-01-04 13:48:42 PST (1609796922) appTemp: 27.7561312321,
>> barometer: 29.922, beaufort: 7, cloudbase: 6804.06549784,
>> consBatteryVoltage: 4.75, dateTime: 1609796922, dayET: 0.0, dayRain: 0.01,
>> dewpoint: 39.7661118095, extraAlarm1: 0, extraAlarm2: 0, extraAlarm3: 0,
>> extraAlarm4: 0, extraAlarm5: 0, extraAlarm6: 0, extraAlarm7: 0,
>> extraAlarm8: 0, forecastIcon: 3, forecastRule: 187, heatindex: 50.3,
>> humidex: 50.3, inDewpoint: 36.425696503, inHumidity: 32.0, insideAlarm: 0,
>> inTemp: 67.3, leafWet4: 0.0, maxSolarRad: 340.146433311, monthET: 0.0,
>> monthRain: 0.01, outHumidity: 67.0, outsideAlarm1: 0, outsideAlarm2: 0,
>> outTemp: 50.3, pressure: 25.4481125632, rain: None, rainAlarm: 0, rainRate:
>> 0.0, soilLeafAlarm1: 0, soilLeafAlarm2: 0, soilLeafAlarm3: 0,
>> soilLeafAlarm4: 0, stormRain: 0.0, sunrise: 1609774320.0, sunset:
>> 1609809312.0, txBatteryStatus: 0, usUnits: 1, windchill: 50.3, windDir:
>> 158.0, windGust: 36.0, windGustDir: 158.0, windSpeed: 36.0, windSpeed10:
>> 28.0, yearET: 0.0, yearRain: 0.4
>>
>>
>> Here's my syslog from the startup with debug = 1
>>
>> ------------------------------------------------------------------------------------------------------
>> Jan 4 13:48:41 raspberrypi weewx[11987] INFO weewx.engine: Initializing
>> weewx version 4.0.0b9
>> Jan 4 13:48:41 raspberrypi weewx[11987] INFO weewx.engine: Using Python
>> 2.7.16 (default, Apr 6 2019, 01:42:57) #012[GCC 8.2.0]
>> Jan 4 13:48:41 raspberrypi weewx[11987] INFO weewx.engine: Platform
>> Linux-4.19.75-v7l+-armv7l-with-debian-10.1
>> Jan 4 13:48:41 raspberrypi weewx[11987] INFO weewx.engine: Locale is
>> 'en_US.UTF-8'
>> Jan 4 13:48:41 raspberrypi weewx[11987] INFO weewx.engine: Using
>> configuration file /home/weewx/weewx.conf
>> Jan 4 13:48:41 raspberrypi weewx[11987] INFO weewx.engine: Loading
>> station type Vantage (weewx.drivers.vantage)
>> Jan 4 13:48:41 raspberrypi weewx[11987] INFO weewx.engine: StdConvert
>> target unit is 0x1
>> Jan 4 13:48:41 raspberrypi weewx[11987] INFO weewx.wxservices: The
>> following values will be calculated: altimeter=prefer_hardware,
>> appTemp=prefer_hardware, barometer=prefer_hardware,
>> beaufort=prefer_hardware, cloudbase=prefer_hardware,
>> dewpoint=prefer_hardware, ET=prefer_hardware, heatindex=prefer_hardware,
>> humidex=prefer_hardware, inDewpoint=prefer_hardware,
>> maxSolarRad=prefer_hardware, pressure=prefer_hardware,
>> rainRate=prefer_hardware, windchill=prefer_hardware, windrun=prefer_hardware
>> Jan 4 13:48:41 raspberrypi weewx[11987] INFO weewx.wxservices: The
>> following algorithms will be used for calculations: altimeter=aaASOS,
>> maxSolarRad=RS
>> Jan 4 13:48:41 raspberrypi weewx[11987] INFO weewx.engine: Archive will
>> use data binding wx_binding
>> Jan 4 13:48:41 raspberrypi weewx[11987] INFO weewx.engine: Record
>> generation will be attempted in 'hardware'
>> Jan 4 13:48:41 raspberrypi weewx[11987] INFO weewx.engine: Using archive
>> interval of 300 seconds (specified by hardware)
>> Jan 4 13:48:41 raspberrypi weewx[11987] INFO weewx.restx:
>> StationRegistry: Station will not be registered: no station_url specified.
>> Jan 4 13:48:41 raspberrypi weewx[11987] INFO weewx.restx:
>> Wunderground-PWS: Data for station {Manually obfuscated} will be posted
>> Jan 4 13:48:41 raspberrypi weewx[11987] INFO weewx.restx: PWSWeather:
>> Data for station {Manually obfuscated} will be posted
>> Jan 4 13:48:41 raspberrypi weewx[11987] INFO weewx.restx: CWOP: Data for
>> station {Manually obfuscated} will be posted
>> Jan 4 13:48:41 raspberrypi weewx[11987] INFO weewx.restx: WOW: Posting
>> not enabled.
>> Jan 4 13:48:41 raspberrypi weewx[11987] INFO weewx.restx: AWEKAS:
>> Posting not enabled.
>> Jan 4 13:48:41 raspberrypi weewx[11987] INFO weewx.engine: Starting up
>> weewx version 4.0.0b9
>> Jan 4 13:48:41 raspberrypi weewx[11987] INFO weewx.engine: Clock error
>> is 0.21 seconds (positive is fast)
>> Jan 4 13:48:41 raspberrypi weewx[11987] INFO weewx.engine: Using binding
>> 'wx_binding' to database 'weewx.sdb'
>> Jan 4 13:48:41 raspberrypi weewx[11987] INFO weewx.manager: Starting
>> backfill of daily summaries
>> Jan 4 13:48:41 raspberrypi weewx[11987] INFO weewx.engine: Starting main
>> packet loop.
>> Jan 4 13:50:14 raspberrypi dbus-daemon[291]: [system] Activating via
>> systemd: service name='org.freedesktop.hostname1'
>> unit='dbus-org.freedesktop.hostname1.service' requested by ':1.43'
>> (uid=1000 pid=11154 comm="geany ")
>> Jan 4 13:50:14 raspberrypi systemd[1]: Starting Hostname Service...
>> Jan 4 13:50:14 raspberrypi dbus-daemon[291]: [system] Successfully
>> activated service 'org.freedesktop.hostname1'
>> Jan 4 13:50:14 raspberrypi systemd[1]: Started Hostname Service.
>> Jan 4 13:50:16 raspberrypi weewx[11987] INFO weewx.manager: Added record
>> 2021-01-04 13:50:00 PST (1609797000) to database 'weewx.sdb'
>> Jan 4 13:50:16 raspberrypi weewx[11987] INFO weewx.manager: Added record
>> 2021-01-04 13:50:00 PST (1609797000) to daily summary in 'weewx.sdb'
>> Jan 4 13:50:18 raspberrypi weewx[11987] INFO weewx.restx: CWOP:
>> Published record 2021-01-04 13:50:00 PST (1609797000)
>> Jan 4 13:50:18 raspberrypi weewx[11987] INFO weewx.cheetahgenerator:
>> Generated 8 files for report SeasonsReport in 1.98 seconds
>> Jan 4 13:50:18 raspberrypi weewx[11987] INFO weewx.restx: PWSWeather:
>> Published record 2021-01-04 13:50:00 PST (1609797000)
>> Jan 4 13:50:19 raspberrypi weewx[11987] INFO weewx.imagegenerator:
>> Generated 14 images for SeasonsReport in 0.65 seconds
>> Jan 4 13:50:19 raspberrypi weewx[11987] INFO weewx.reportengine: Copied
>> 5 files to /home/weewx/public_html/seasons
>> Jan 4 13:50:19 raspberrypi weewx[11987] INFO weewx.restx:
>> Wunderground-PWS: Published record 2021-01-04 13:50:00 PST (1609797000)
>> Jan 4 13:50:19 raspberrypi weewx[11987] INFO weewx.cheetahgenerator:
>> Generated 6 files for report SmartphoneReport in 0.19 seconds
>> Jan 4 13:50:19 raspberrypi weewx[11987] INFO weewx.imagegenerator:
>> Generated 6 images for SmartphoneReport in 0.25 seconds
>> Jan 4 13:50:19 raspberrypi weewx[11987] INFO weewx.reportengine: Copied
>> 6 files to /home/weewx/public_html/smartphone
>> Jan 4 13:50:19 raspberrypi weewx[11987] INFO weewx.cheetahgenerator:
>> Generated 1 files for report MobileReport in 0.06 seconds
>> Jan 4 13:50:19 raspberrypi weewx[11987] INFO weewx.imagegenerator:
>> Generated 4 images for MobileReport in 0.17 seconds
>> Jan 4 13:50:19 raspberrypi weewx[11987] INFO weewx.reportengine: Copied
>> 2 files to /home/weewx/public_html/mobile
>> Jan 4 13:50:21 raspberrypi weewx[11987] INFO weewx.cheetahgenerator:
>> Generated 14 files for report StandardReport in 1.89 seconds
>> Jan 4 13:50:22 raspberrypi weewx[11987] INFO weewx.imagegenerator:
>> Generated 12 images for StandardReport in 0.50 seconds
>> Jan 4 13:50:22 raspberrypi weewx[11987] INFO weewx.reportengine: Copied
>> 14 files to /home/weewx/public_html/std
>> Jan 4 13:50:22 raspberrypi weewx[11987] INFO weewx.cheetahgenerator:
>> Generated 1 files for report PVW in 0.19 seconds
>> Jan 4 13:50:23 raspberrypi weewx[11987] INFO weewx.imagegenerator:
>> Generated 11 images for PVW in 0.43 seconds
>> Jan 4 13:50:23 raspberrypi weewxd: i:19 1609797023.21 1609778423
>> speed:2.0 dir :146.25
>> Jan 4 13:50:23 raspberrypi weewxd: i:20 1609797023.21 1609779023
>> speed:1.5 dir :123.75
>> Jan 4 13:50:23 raspberrypi weewxd: i:21 1609797023.21 1609779623
>> speed:0.5 dir :112.5
>> Jan 4 13:50:23 raspberrypi weewxd: i:22 1609797023.21 1609780223
>> speed:3.5 dir :168.75
>> Jan 4 13:50:23 raspberrypi weewxd: i:23 1609797023.21 1609780823
>> speed:1.5 dir :315.0
>> Jan 4 13:50:23 raspberrypi weewxd: i:24 1609797023.21 1609781423
>> speed:0.0 dir :None
>> Jan 4 13:50:23 raspberrypi weewxd: i:25 1609797023.21 1609782023
>> speed:0.5 dir :315.0
>> Jan 4 13:50:23 raspberrypi weewxd: i:26 1609797023.21 1609782623
>> speed:0.0 dir :None
>> Jan 4 13:50:23 raspberrypi weewxd: i:27 1609797023.21 1609783223
>> speed:2.0 dir :191.25
>> Jan 4 13:50:23 raspberrypi weewxd: i:28 1609797023.21 1609783823
>> speed:5.5 dir :270.0
>> Jan 4 13:50:23 raspberrypi weewxd: i:29 1609797023.21 1609784423
>> speed:6.0 dir :270.0
>> Jan 4 13:50:23 raspberrypi weewxd: i:30 1609797023.21 1609785023
>> speed:13.5 dir :213.75
>> Jan 4 13:50:23 raspberrypi weewxd: i:31 1609797023.21 1609785623
>> speed:17.5 dir :236.25
>> Jan 4 13:50:23 raspberrypi weewxd: i:32 1609797023.21 1609786223
>> speed:19.0 dir :225.0
>> Jan 4 13:50:23 raspberrypi weewxd: i:33 1609797023.21 1609786823
>> speed:20.0 dir :225.0
>> Jan 4 13:50:23 raspberrypi weewxd: i:34 1609797023.21 1609787423
>> speed:22.0 dir :213.75
>> Jan 4 13:50:23 raspberrypi weewxd: i:35 1609797023.21 1609788023
>> speed:24.0 dir :180.0
>> Jan 4 13:50:23 raspberrypi weewxd: i:36 1609797023.21 1609788623
>> speed:20.5 dir :191.25
>> Jan 4 13:50:23 raspberrypi weewxd: i:37 1609797023.21 1609789223
>> speed:22.5 dir :225.0
>> Jan 4 13:50:23 raspberrypi weewxd: i:38 1609797023.21 1609789823
>> speed:22.5 dir :202.5
>> Jan 4 13:50:23 raspberrypi weewxd: i:39 1609797023.21 1609790423
>> speed:16.5 dir :236.25
>> Jan 4 13:50:23 raspberrypi weewxd: i:40 1609797023.21 1609791023
>> speed:15.5 dir :191.25
>> Jan 4 13:50:23 raspberrypi weewxd: i:41 1609797023.21 1609791623
>> speed:22.5 dir :157.5
>> Jan 4 13:50:23 raspberrypi weewxd: i:42 1609797023.21 1609792223
>> speed:21.0 dir :180.0
>> Jan 4 13:50:23 raspberrypi weewxd: i:43 1609797023.21 1609792823
>> speed:25.5 dir :157.5
>> Jan 4 13:50:23 raspberrypi weewxd: i:44 1609797023.21 1609793423
>> speed:22.5 dir :168.75
>> Jan 4 13:50:23 raspberrypi weewxd: i:44 Recent 1609793423 Mon, 04
>> Jan 2021 12:50:23 +0000
>> Jan 4 13:50:23 raspberrypi weewxd: i:45 1609797023.21 1609794023
>> speed:26.5 dir :157.5
>> Jan 4 13:50:23 raspberrypi weewxd: i:45 Recent 1609794023 Mon, 04
>> Jan 2021 13:00:23 +0000
>> Jan 4 13:50:23 raspberrypi weewxd: i:46 1609797023.21 1609794623
>> speed:22.5 dir :157.5
>> Jan 4 13:50:23 raspberrypi weewxd: i:46 Recent 1609794623 Mon, 04
>> Jan 2021 13:10:23 +0000
>> Jan 4 13:50:23 raspberrypi weewxd: i:47 1609797023.21 1609795223
>> speed:24.0 dir :157.5
>> Jan 4 13:50:23 raspberrypi weewxd: i:47 Recent 1609795223 Mon, 04
>> Jan 2021 13:20:23 +0000
>> Jan 4 13:50:23 raspberrypi weewxd: i:48 1609797023.21 1609795823
>> speed:27.0 dir :157.5
>> Jan 4 13:50:23 raspberrypi weewxd: i:48 Recent 1609795823 Mon, 04
>> Jan 2021 13:30:23 +0000
>> Jan 4 13:50:23 raspberrypi weewxd: i:49 1609797023.21 1609796423
>> speed:28.0 dir :157.5
>> Jan 4 13:50:23 raspberrypi weewxd: i:49 Recent 1609796423 Mon, 04
>> Jan 2021 13:40:23 +0000
>> Jan 4 13:50:23 raspberrypi weewxd: i:49 Current 1609796423 Mon, 04
>> Jan 2021 13:40:23 +0000
>> Jan 4 13:50:23 raspberrypi weewxd: speed:28.0
>> Jan 4 13:50:23 raspberrypi weewxd: dir :157.5
>> Jan 4 13:50:23 raspberrypi weewxd: imageWindRose:genimages: Generated 1
>> images in 0.16 seconds
>> Jan 4 13:50:23 raspberrypi weewx[11987] INFO weewx.reportengine: Copied
>> 24 files to /home/weewx/public_html/PVW
>> Jan 4 13:50:31 raspberrypi weewx[11987] INFO weewx.engine: Main loop
>> exiting. Shutting engine down.
>> Jan 4 13:50:31 raspberrypi weewx[11987] INFO weewx.engine: Shutting down
>> StdReport thread
>> Jan 4 13:50:42 raspberrypi weewx[11987] CRITICAL weewx.engine: Keyboard
>> interrupt.
>> Jan 4 13:50:44 raspberrypi weewx[11987] INFO weewx.reportengine:
>> ftpgenerator: Ftp'd 29 files in 21.12 seconds
>> Jan 4 13:50:45 raspberrypi systemd[1]: systemd-hostnamed.service:
>> Succeeded.
>> Jan 4 13:50:50 raspberrypi systemd[1]: Starting LSB: weewx weather
>> system...
>> Jan 4 13:50:50 raspberrypi weewx[12051] INFO weewx.engine: Initializing
>> weewx version 4.0.0b9
>> Jan 4 13:50:50 raspberrypi weewx[12051] INFO weewx.engine: Using Python
>> 2.7.16 (default, Apr 6 2019, 01:42:57) #012[GCC 8.2.0]
>> Jan 4 13:50:50 raspberrypi weewx[12051] INFO weewx.engine: Platform
>> Linux-4.19.75-v7l+-armv7l-with-debian-10.1
>> Jan 4 13:50:50 raspberrypi weewx[12051] INFO weewx.engine: Locale is
>> 'en_US.UTF-8'
>> Jan 4 13:50:50 raspberrypi weewx[12051] INFO weewx.engine: PID file is
>> /var/run/weewx.pid
>> Jan 4 13:50:50 raspberrypi weewx[12055] INFO weewx.engine: Using
>> configuration file /home/weewx/weewx.conf
>> Jan 4 13:50:50 raspberrypi weewx[12040]: Starting weewx weather system:
>> weewx.
>> Jan 4 13:50:50 raspberrypi systemd[1]: Started LSB: weewx weather system.
>> Jan 4 13:50:50 raspberrypi weewx[12055] DEBUG weewx.engine: Debug is 1
>> Jan 4 13:50:50 raspberrypi weewx[12055] DEBUG weewx.engine: Initializing
>> engine
>> Jan 4 13:50:50 raspberrypi weewx[12055] INFO weewx.engine: Loading
>> station type Vantage (weewx.drivers.vantage)
>> Jan 4 13:50:50 raspberrypi weewx[12055] DEBUG weewx.drivers.vantage:
>> Driver version is 3.2.0
>> Jan 4 13:50:50 raspberrypi weewx[12055] DEBUG weewx.drivers.vantage:
>> Opened up serial port /dev/ttyUSB0; baud 19200; timeout 4.00
>> Jan 4 13:50:50 raspberrypi weewx[12055] DEBUG weewx.drivers.vantage:
>> Gentle wake up of console successful
>> Jan 4 13:50:50 raspberrypi weewx[12055] DEBUG weewx.drivers.vantage:
>> Hardware type is 17
>> Jan 4 13:50:50 raspberrypi weewx[12055] DEBUG weewx.drivers.vantage: ISS
>> ID is 1
>> Jan 4 13:50:50 raspberrypi weewx[12055] DEBUG weewx.drivers.vantage:
>> Hardware name: Vantage Vue
>> Jan 4 13:50:50 raspberrypi weewx[12055] DEBUG weewx.engine: Loading
>> service weewx.engine.StdTimeSynch
>> Jan 4 13:50:50 raspberrypi weewx[12055] DEBUG weewx.engine: Finished
>> loading service weewx.engine.StdTimeSynch
>> Jan 4 13:50:50 raspberrypi weewx[12055] DEBUG weewx.engine: Loading
>> service weewx.engine.StdConvert
>> Jan 4 13:50:50 raspberrypi weewx[12055] INFO weewx.engine: StdConvert
>> target unit is 0x1
>> Jan 4 13:50:50 raspberrypi weewx[12055] DEBUG weewx.engine: Finished
>> loading service weewx.engine.StdConvert
>> Jan 4 13:50:50 raspberrypi weewx[12055] DEBUG weewx.engine: Loading
>> service weewx.engine.StdCalibrate
>> Jan 4 13:50:50 raspberrypi weewx[12055] DEBUG weewx.engine: Finished
>> loading service weewx.engine.StdCalibrate
>> Jan 4 13:50:50 raspberrypi weewx[12055] DEBUG weewx.engine: Loading
>> service weewx.engine.StdQC
>> Jan 4 13:50:50 raspberrypi weewx[12055] DEBUG weewx.engine: Finished
>> loading service weewx.engine.StdQC
>> Jan 4 13:50:50 raspberrypi weewx[12055] DEBUG weewx.engine: Loading
>> service weewx.wxservices.StdWXCalculate
>> Jan 4 13:50:50 raspberrypi weewx[12055] DEBUG weewx.manager: Daily
>> summary version is 2.0
>> Jan 4 13:50:50 raspberrypi weewx[12055] INFO weewx.wxservices: The
>> following values will be calculated: altimeter=prefer_hardware,
>> appTemp=prefer_hardware, barometer=prefer_hardware,
>> beaufort=prefer_hardware, cloudbase=prefer_hardware,
>> dewpoint=prefer_hardware, ET=prefer_hardware, heatindex=prefer_hardware,
>> humidex=prefer_hardware, inDewpoint=prefer_hardware,
>> maxSolarRad=prefer_hardware, pressure=prefer_hardware,
>> rainRate=prefer_hardware, windchill=prefer_hardware, windrun=prefer_hardware
>> Jan 4 13:50:50 raspberrypi weewx[12055] INFO weewx.wxservices: The
>> following algorithms will be used for calculations: altimeter=aaASOS,
>> maxSolarRad=RS
>> Jan 4 13:50:50 raspberrypi weewx[12055] DEBUG weewx.engine: Finished
>> loading service weewx.wxservices.StdWXCalculate
>> Jan 4 13:50:50 raspberrypi weewx[12055] DEBUG weewx.engine: Loading
>> service weewx.engine.StdArchive
>> Jan 4 13:50:50 raspberrypi weewx[12055] INFO weewx.engine: Archive will
>> use data binding wx_binding
>> Jan 4 13:50:50 raspberrypi weewx[12055] INFO weewx.engine: Record
>> generation will be attempted in 'hardware'
>> Jan 4 13:50:50 raspberrypi weewx[12055] INFO weewx.engine: Using archive
>> interval of 300 seconds (specified by hardware)
>> Jan 4 13:50:50 raspberrypi weewx[12055] DEBUG weewx.engine: Use LOOP
>> data in hi/low calculations: 1
>> Jan 4 13:50:50 raspberrypi weewx[12055] DEBUG weewx.engine: Finished
>> loading service weewx.engine.StdArchive
>> Jan 4 13:50:50 raspberrypi weewx[12055] DEBUG weewx.engine: Loading
>> service weewx.restx.StdStationRegistry
>> Jan 4 13:50:50 raspberrypi weewx[12055] INFO weewx.restx:
>> StationRegistry: Station will not be registered: no station_url specified.
>> Jan 4 13:50:50 raspberrypi weewx[12055] DEBUG weewx.engine: Finished
>> loading service weewx.restx.StdStationRegistry
>> Jan 4 13:50:50 raspberrypi weewx[12055] DEBUG weewx.engine: Loading
>> service weewx.restx.StdWunderground
>> Jan 4 13:50:50 raspberrypi weewx[12055] DEBUG weewx.restx: WU
>> essentials: {}
>> Jan 4 13:50:50 raspberrypi weewx[12055] INFO weewx.restx:
>> Wunderground-PWS: Data for station {Manually obfuscated} will be posted
>> Jan 4 13:50:50 raspberrypi weewx[12055] DEBUG weewx.engine: Finished
>> loading service weewx.restx.StdWunderground
>> Jan 4 13:50:50 raspberrypi weewx[12055] DEBUG weewx.engine: Loading
>> service weewx.restx.StdPWSweather
>> Jan 4 13:50:50 raspberrypi weewx[12055] INFO weewx.restx: PWSWeather:
>> Data for station {Manually obfuscated} will be posted
>> Jan 4 13:50:50 raspberrypi weewx[12055] DEBUG weewx.engine: Finished
>> loading service weewx.restx.StdPWSweather
>> Jan 4 13:50:50 raspberrypi weewx[12055] DEBUG weewx.engine: Loading
>> service weewx.restx.StdCWOP
>> Jan 4 13:50:50 raspberrypi weewx[12055] INFO weewx.restx: CWOP: Data for
>> station {Manually obfuscated} will be posted
>> Jan 4 13:50:50 raspberrypi weewx[12055] DEBUG weewx.engine: Finished
>> loading service weewx.restx.StdCWOP
>> Jan 4 13:50:50 raspberrypi weewx[12055] DEBUG weewx.engine: Loading
>> service weewx.restx.StdWOW
>> Jan 4 13:50:50 raspberrypi weewx[12055] INFO weewx.restx: WOW: Posting
>> not enabled.
>> Jan 4 13:50:50 raspberrypi weewx[12055] DEBUG weewx.engine: Finished
>> loading service weewx.restx.StdWOW
>> Jan 4 13:50:50 raspberrypi weewx[12055] DEBUG weewx.engine: Loading
>> service weewx.restx.StdAWEKAS
>> Jan 4 13:50:50 raspberrypi weewx[12055] INFO weewx.restx: AWEKAS:
>> Posting not enabled.
>> Jan 4 13:50:50 raspberrypi weewx[12055] DEBUG weewx.engine: Finished
>> loading service weewx.restx.StdAWEKAS
>> Jan 4 13:50:50 raspberrypi weewx[12055] DEBUG weewx.engine: Loading
>> service weewx.engine.StdPrint
>> Jan 4 13:50:50 raspberrypi weewx[12055] DEBUG weewx.engine: Finished
>> loading service weewx.engine.StdPrint
>> Jan 4 13:50:50 raspberrypi weewx[12055] DEBUG weewx.manager: Daily
>> summary version is 2.0
>> Jan 4 13:50:50 raspberrypi weewx[12055] DEBUG weewx.engine: Loading
>> service weewx.engine.StdReport
>> Jan 4 13:50:50 raspberrypi weewx[12055] DEBUG weewx.engine: Finished
>> loading service weewx.engine.StdReport
>> Jan 4 13:50:50 raspberrypi weewx[12055] INFO weewx.engine: Starting up
>> weewx version 4.0.0b9
>> Jan 4 13:50:50 raspberrypi weewx[12055] DEBUG weewx.drivers.vantage:
>> Gentle wake up of console successful
>> Jan 4 13:50:50 raspberrypi weewx[12055] DEBUG weewx.manager: Daily
>> summary version is 2.0
>> Jan 4 13:50:50 raspberrypi weewx[12055] DEBUG weewx.manager: Daily
>> summary version is 2.0
>> Jan 4 13:50:50 raspberrypi weewx[12055] INFO weewx.engine: Clock error
>> is 0.20 seconds (positive is fast)
>> Jan 4 13:50:50 raspberrypi weewx[12055] INFO weewx.engine: Using binding
>> 'wx_binding' to database 'weewx.sdb'
>> Jan 4 13:50:50 raspberrypi weewx[12055] INFO weewx.manager: Starting
>> backfill of daily summaries
>> Jan 4 13:50:50 raspberrypi weewx[12055] DEBUG weewx.drivers.vantage:
>> Getting archive packets since 2021-01-04 13:50:00 PST (1609797000)
>> Jan 4 13:50:50 raspberrypi weewx[12055] DEBUG weewx.drivers.vantage:
>> Gentle wake up of console successful
>> Jan 4 13:50:50 raspberrypi weewx[12055] DEBUG weewx.drivers.vantage:
>> Retrieving 0 page(s); starting index= 0
>> Jan 4 13:50:50 raspberrypi weewx[12055] INFO weewx.engine: Starting main
>> packet loop.
>> Jan 4 13:50:50 raspberrypi weewx[12055] DEBUG weewx.drivers.vantage:
>> Gentle wake up of console successful
>> Jan 4 13:50:50 raspberrypi weewx[12055] DEBUG weewx.drivers.vantage:
>> Requesting 200 LOOP packets.
>> Jan 4 13:50:50 raspberrypi weewx[12055] DEBUG weewx.drivers.vantage:
>> Gentle wake up of console successful
>>
>>
>> wee_debug --info
>>
>> ------------------------------------------------------------------------------------------------------
>> Using configuration file /home/weewx/weewx.conf
>> Using database binding 'wx_binding', which is bound to database
>> 'archive_sqlite'
>>
>> System info
>> Platform: Linux-4.19.75-v7l+-armv7l-with-debian-10.1
>> Python Version: 2.7.16
>>
>> Load Information
>> 1 minute load average: 0.19
>> 5 minute load average: 0.24
>> 15 minute load average: 0.20
>>
>> General Weewx info
>> Weewx version 4.0.0b9 detected.
>>
>> Station info
>> Station type: Vantage
>> Driver: weewx.drivers.vantage
>>
>> Driver info
>> [Vantage]
>> # This section is for the Davis Vantage series of weather stations.
>>
>> # Connection type: serial or ethernet
>> # serial (the classic VantagePro)
>> # ethernet (the WeatherLinkIP or Serial-Ethernet bridge)
>> type = serial
>>
>> # If the connection type is serial, a port must be specified:
>> # Debian, Ubuntu, Redhat, Fedora, and SuSE:
>> # /dev/ttyUSB0 is a common USB port name
>> # /dev/ttyS0 is a common serial port name
>> # BSD:
>> # /dev/cuaU0 is a common serial port name
>> port = /dev/ttyUSB0
>> #port = /dev/ttyS0
>>
>> # If the connection type is ethernet, an IP Address/hostname is
>> required:
>> host = 1.2.3.4
>>
>> ######################################################
>> # The rest of this section rarely needs any attention.
>> # You can safely leave it "as is."
>> ######################################################
>>
>> # Serial baud rate (usually 19200)
>> baudrate = 19200
>>
>> # TCP port (when using the WeatherLinkIP)
>> tcp_port = 22222
>>
>> # TCP send delay (when using the WeatherLinkIP):
>> tcp_send_delay = 0.5
>>
>> # The type of LOOP packet to request: 1 = LOOP1; 2 = LOOP2; 3 = both
>> loop_request = 1
>>
>> # The id of your ISS station (usually 1). If you use a wind meter
>> connected
>> # to a anemometer transmitter kit, use its id
>> iss_id = 1
>>
>> # How long to wait for a response from the station before giving up
>> (in
>> # seconds; must be greater than 2)
>> timeout = 4
>>
>> # How long to wait before trying again (in seconds)
>> wait_before_retry = 1.2
>>
>> # How many times to try before giving up:
>> max_tries = 4
>>
>> # Vantage model Type: 1 = Vantage Pro; 2 = Vantage Pro2
>> model_type = 2
>>
>> # The driver to use:
>> driver = weewx.drivers.vantage
>>
>> Currently installed extensions
>> No extensions installed
>>
>> Archive info
>> Database name: weewx.sdb
>> Table name: archive
>> Version 2.0
>> Unit system: 1 (US)
>> First good timestamp: 2020-01-17 14:35:00 PST (1579300500)
>> Last good timestamp: 2021-01-04 14:10:00 PST (1609798200)
>> Number of records: 101479
>> weewx (weewx.conf) is set to use an archive interval of 300 seconds.
>> The station hardware was not interrogated in determining archive
>> interval.
>>
>> Databases configured in weewx.conf
>> Database name: weewx.sdb
>> Database driver: weedb.sqlite
>>
>> Database name: weewx
>> Database driver: weedb.mysql
>> Database host: localhost
>>
>>
>> Parsed and obfuscated weewx.conf
>> # WEEWX CONFIGURATION FILE
>> #
>> # Copyright (c) 2009-2019 Tom Keffer <[email protected]>
>> # See the file LICENSE.txt for your rights.
>>
>>
>> ##############################################################################
>>
>> # This section is for general configuration information.
>>
>> # Set to 1 for extra debug info, otherwise comment it out or set to zero
>> debug = 1
>>
>> # Root directory of the weewx data file hierarchy for this station
>> WEEWX_ROOT = /home/weewx
>>
>> # Whether to log successful operations
>> log_success = True
>>
>> # Whether to log unsuccessful operations
>> log_failure = True
>>
>> # How long to wait before timing out a socket (FTP, HTTP) connection
>> socket_timeout = 20
>>
>> # Do not modify this. It is used when installing and updating weewx.
>> version = 4.0.0b9
>>
>>
>> ##############################################################################
>>
>> # This section is for information about the station.
>>
>> [Station]
>>
>> # Description of the station location
>> location = Palomino Valley Weather
>>
>> # Latitude and longitude in decimal degrees
>> latitude = 39.8308
>> longitude = -119.6427
>>
>> # Altitude of the station, with unit it is in. This is downloaded from
>> # from the station if the hardware supports it.
>> altitude = 4210, foot # Choose 'foot' or 'meter' for unit
>>
>> # If you have a website, you may specify an URL
>> #station_url = http://www.example.com
>>
>> # The start of the rain year (1=January; 10=October, etc.). This is
>> # downloaded from the station if the hardware supports it.
>> rain_year_start = 10
>>
>> # Start of week (0=Monday, 6=Sunday)
>> week_start = 6
>>
>> # Set to type of station hardware. There must be a corresponding
>> stanza
>> # in this file with a 'driver' parameter indicating the driver to be
>> used.
>> #station_type = Vantage
>> station_type = Vantage
>>
>>
>> ##############################################################################
>>
>> [Vantage]
>> # This section is for the Davis Vantage series of weather stations.
>>
>> # Connection type: serial or ethernet
>> # serial (the classic VantagePro)
>> # ethernet (the WeatherLinkIP or Serial-Ethernet bridge)
>> type = serial
>>
>> # If the connection type is serial, a port must be specified:
>> # Debian, Ubuntu, Redhat, Fedora, and SuSE:
>> # /dev/ttyUSB0 is a common USB port name
>> # /dev/ttyS0 is a common serial port name
>> # BSD:
>> # /dev/cuaU0 is a common serial port name
>> port = /dev/ttyUSB0
>> #port = /dev/ttyS0
>>
>> # If the connection type is ethernet, an IP Address/hostname is
>> required:
>> host = 1.2.3.4
>>
>> ######################################################
>> # The rest of this section rarely needs any attention.
>> # You can safely leave it "as is."
>> ######################################################
>>
>> # Serial baud rate (usually 19200)
>> baudrate = 19200
>>
>> # TCP port (when using the WeatherLinkIP)
>> tcp_port = 22222
>>
>> # TCP send delay (when using the WeatherLinkIP):
>> tcp_send_delay = 0.5
>>
>> # The type of LOOP packet to request: 1 = LOOP1; 2 = LOOP2; 3 = both
>> loop_request = 1
>>
>> # The id of your ISS station (usually 1). If you use a wind meter
>> connected
>> # to a anemometer transmitter kit, use its id
>> iss_id = 1
>>
>> # How long to wait for a response from the station before giving up
>> (in
>> # seconds; must be greater than 2)
>> timeout = 4
>>
>> # How long to wait before trying again (in seconds)
>> wait_before_retry = 1.2
>>
>> # How many times to try before giving up:
>> max_tries = 4
>>
>> # Vantage model Type: 1 = Vantage Pro; 2 = Vantage Pro2
>> model_type = 2
>>
>> # The driver to use:
>> driver = weewx.drivers.vantage
>>
>>
>> ##############################################################################
>>
>> [Simulator]
>> # This section is for the weewx weather station simulator
>>
>> # The time (in seconds) between LOOP packets.
>> loop_interval = 2.5
>>
>> # The simulator mode can be either 'simulator' or 'generator'.
>> # Real-time simulator. Sleep between each LOOP packet.
>> mode = simulator
>> # Generator. Emit LOOP packets as fast as possible (useful for
>> testing).
>> #mode = generator
>>
>> # The start time. Format is YYYY-mm-ddTHH:MM. If not specified, the
>> default
>> # is to use the present time.
>> #start = 2011-01-01T00:00
>>
>> # The driver to use:
>> driver = weewx.drivers.simulator
>>
>>
>> ##############################################################################
>>
>> # This section is for uploading data to Internet sites
>>
>> [StdRESTful]
>>
>> [[StationRegistry]]
>> # To register this weather station with weewx, set this to true
>> register_this_station = true
>>
>> [[AWEKAS]]
>> # This section is for configuring posts to AWEKAS.
>>
>> # If you wish to do this, set the option 'enable' to true,
>> # and specify a username and password.
>> # To guard against parsing errors, put the password in quotes.
>> enable = false
>> username = XXX obfuscated by wee_debug XXX
>> password = XXX obfuscated by wee_debug XXX
>>
>> [[CWOP]]
>> # This section is for configuring posts to CWOP.
>>
>> # If you wish to do this, set the option 'enable' to true,
>> # and specify the station ID (e.g., CW1234).
>> enable = true
>> station = XXX obfuscated by wee_debug XXX
>>
>> # If this is an APRS (radio amateur) station, uncomment
>> # the following and replace with a passcode (e.g., 12345).
>> #passcode = replace_me (APRS stations only)
>>
>> [[PWSweather]]
>> # This section is for configuring posts to PWSweather.com.
>>
>> # If you wish to do this, set the option 'enable' to true,
>> # and specify a station and password.
>> # To guard against parsing errors, put the password in quotes.
>> enable = true
>> station = XXX obfuscated by wee_debug XXX
>> password = XXX obfuscated by wee_debug XXX
>>
>> [[WOW]]
>> # This section is for configuring posts to WOW.
>>
>> # If you wish to do this, set the option 'enable' to true,
>> # and specify a station and password.
>> # To guard against parsing errors, put the password in quotes.
>> enable = false
>> station = XXX obfuscated by wee_debug XXX
>> password = XXX obfuscated by wee_debug XXX
>>
>> [[Wunderground]]
>> # This section is for configuring posts to the Weather
>> Underground.
>>
>> # If you wish to do this, set the option 'enable' to true,
>> # and specify a station (e.g., 'KORHOODR3') and password.
>> # To guard against parsing errors, put the password in quotes.
>> enable = true
>> station = XXX obfuscated by wee_debug XXX
>> password = XXX obfuscated by wee_debug XXX
>>
>> # If you plan on using wunderfixer, set the following
>> # to your API key:
>> api_key = XXX obfuscated by wee_debug XXX
>>
>> # Set the following to True to have weewx use the WU "Rapidfire"
>> # protocol. Not all hardware can support it. See the User's Guide.
>> rapidfire = False
>>
>>
>> ##############################################################################
>>
>> # This section specifies what reports, using which skins, to generate.
>>
>> [StdReport]
>>
>> # Where the skins reside, relative to WEEWX_ROOT
>> SKIN_ROOT = skins
>>
>> # Where the generated reports should go, relative to WEEWX_ROOT
>> HTML_ROOT = public_html/std
>>
>> # The database binding indicates which data should be used in reports.
>> data_binding = wx_binding
>>
>> # Whether to log a successful operation
>> log_success = True
>>
>> # Whether to log an unsuccessful operation
>> log_failure = False
>>
>> # Each of the following subsections defines a report that will be run.
>> # See the customizing guide to change the units, plot types and line
>> # colors, modify the fonts, display additional sensor data, and other
>> # customizations. Many of those changes can be made here by overriding
>> # parameters, or by modifying templates within the skin itself.
>>
>> [[SeasonsReport]]
>> # The SeasonsReport uses the 'Seasons' skin, which contains the
>> # images, templates and plots for the report.
>> skin = Seasons
>> enable = true
>> HTML_ROOT = public_html/seasons
>>
>> [[SmartphoneReport]]
>> # The SmartphoneReport uses the 'Smartphone' skin, and the images
>> and
>> # files are placed in a dedicated subdirectory.
>> skin = Smartphone
>> enable = true
>> HTML_ROOT = public_html/smartphone
>>
>> [[MobileReport]]
>> # The MobileReport uses the 'Mobile' skin, and the images and
>> files
>> # are placed in a dedicated subdirectory.
>> skin = Mobile
>> enable = true
>> HTML_ROOT = public_html/mobile
>>
>> [[StandardReport]]
>> # This is the old "Standard" skin. By default, it is not enabled.
>> skin = Standard
>> enable = true
>> HTML_ROOT = public_html/std
>>
>> [[PVW]]
>> # What skin this report should be based on:
>> skin = PVW
>> enable = true
>> HTML_ROOT = public_html/PVW
>> #HTML_ROOT = public_html/
>>
>> [[FTP]]
>> # FTP'ing the results to a webserver is treated as just another
>> report,
>> # albeit one with an unusual report generator!
>> skin = Ftp
>>
>> # If you wish to use FTP, set "enable" to "true", then
>> # fill out the next four lines.
>> # Use quotes around passwords to guard against parsing errors.
>> enable = true
>> user = XXX obfuscated by wee_debug XXX
>> password = XXX obfuscated by wee_debug XXX
>> server = ftp.techcpg.com
>> path = /
>>
>> # Set to True for an FTP over TLS (FTPS) connection. Not all
>> servers
>> # support this.
>> secure_ftp = False
>>
>> # To upload files from something other than what HTML_ROOT is set
>> # to above, specify a different HTML_ROOT here.
>> HTML_ROOT = public_html/PVW
>>
>> # Most FTP servers use port 21
>> port = 21
>>
>> # Set to 1 to use passive mode, zero for active mode
>> passive = 1
>>
>> [[RSYNC]]
>> # rsync'ing to a webserver is treated as just another report
>> skin = Rsync
>>
>> # If you wish to use rsync, you must configure passwordless ssh
>> using
>> # public/private key authentication from the user account that
>> weewx
>> # runs to the user account on the remote machine where the files
>> # will be copied.
>> #
>> # If you wish to use rsync, set "enable" to "true", then
>> # fill out server, user, and path.
>> # The server should appear in your .ssh/config file.
>> # The user is the username used in the identity file.
>> # The path is the destination directory, such as
>> /var/www/html/weather.
>> # Be sure that the user has write permissions on the destination!
>> enable = false
>> server = replace_me
>> user = XXX obfuscated by wee_debug XXX
>> path = replace_me
>>
>> # To upload files from something other than what HTML_ROOT is set
>> # to above, specify a different HTML_ROOT here.
>> #HTML_ROOT = public_html
>>
>> # Rsync can be configured to remove files from the remote server
>> if
>> # they don't exist under HTML_ROOT locally. USE WITH CAUTION: if
>> you
>> # make a mistake in the remote path, you could could
>> unintentionally
>> # cause unrelated files to be deleted. Set to 1 to enable remote
>> file
>> # deletion, zero to allow files to accumulate remotely.
>> delete = 0
>>
>> ####
>>
>> # Various options for customizing your reports.
>>
>> [[Defaults]]
>>
>> [[[Units]]]
>>
>> # The following section sets what unit to use for each unit
>> group.
>> # NB: The unit is always in the singular. I.e.,
>> 'mile_per_hour',
>> # NOT 'miles_per_hour'
>> [[[[Groups]]]]
>>
>> group_altitude = foot # Options are 'foot' or 'meter'
>> group_degree_day = degree_F_day # Options are
>> 'degree_F_day' or 'degree_C_day'
>> group_distance = mile # Options are 'mile' or 'km'
>> group_pressure = inHg # Options are 'inHg', 'mmHg',
>> 'mbar', or 'hPa'
>> group_rain = inch # Options are 'inch', 'cm', or 'mm'
>> group_rainrate = inch_per_hour # Options are
>> 'inch_per_hour', 'cm_per_hour', or 'mm_per_hour'
>> group_speed = mile_per_hour # Options are
>> 'mile_per_hour', 'km_per_hour', 'knot', or 'meter_per_second'
>> group_speed2 = mile_per_hour2 # Options are
>> 'mile_per_hour2', 'km_per_hour2', 'knot2', or 'meter_per_second2'
>> group_temperature = degree_F # Options are 'degree_F'
>> or 'degree_C'
>>
>> # The following section sets the formatting for each type of
>> unit.
>> [[[[StringFormats]]]]
>>
>> centibar = %.0f
>> cm = %.2f
>> cm_per_hour = %.2f
>> degree_C = %.1f
>> degree_F = %.1f
>> degree_compass = %.0f
>> foot = %.0f
>> hPa = %.1f
>> hour = %.1f
>> inHg = %.3f
>> inch = %.2f
>> inch_per_hour = %.2f
>> km = %.1f
>> km_per_hour = %.0f
>> km_per_hour2 = %.1f
>> knot = %.0f
>> knot2 = %.1f
>> mbar = %.1f
>> meter = %.0f
>> meter_per_second = %.1f
>> meter_per_second2 = %.1f
>> mile = %.1f
>> mile_per_hour = %.0f
>> mile_per_hour2 = %.1f
>> mm = %.1f
>> mmHg = %.1f
>> mm_per_hour = %.1f
>> percent = %.0f
>> second = %.0f
>> uv_index = %.1f
>> volt = %.1f
>> watt_per_meter_squared = %.0f
>> NONE = " N/A"
>>
>> # The following section overrides the label used for each
>> type of unit
>> [[[[Labels]]]]
>>
>> meter = " meter", " meters" # You may prefer "metre".
>> day = " day", " days"
>> hour = " hour", " hours"
>> minute = " minute", " minutes"
>> second = " second", " seconds"
>> NONE = ""
>>
>> # The following section sets the format for each time scale.
>> # The values below will work in every locale, but they may
>> not look
>> # particularly attractive.
>> [[[[TimeFormats]]]]
>>
>> hour = %H:%M
>> day = %X
>> week = %X (%A)
>> month = %x %X
>> year = %x %X
>> rainyear = %x %X
>> current = %x %X
>> ephem_day = %X
>> ephem_year = %x %X
>>
>> [[[[Ordinates]]]]
>>
>> # Ordinal directions. The last one is for no wind
>> direction
>> directions = N, NNE, NE, ENE, E, ESE, SE, SSE, S, SSW,
>> SW, WSW, W, WNW, NW, NNW, N/A
>>
>> # The following section sets the base temperatures used for
>> the
>> # calculation of heating, cooling, and growing degree-days.
>> [[[[DegreeDays]]]]
>>
>> # Base temperature for heating days, with unit:
>> heating_base = 65, degree_F
>> # Base temperature for cooling days, with unit:
>> cooling_base = 65, degree_F
>> # Base temperature for growing days, with unit:
>> growing_base = 50, degree_F
>>
>> # A trend takes a difference across a time period. The
>> following
>> # section sets the time period, and how big an error is
>> allowed to
>> # still be counted as the start or end of a period.
>> [[[[Trend]]]]
>>
>> time_delta = 10800 # 3 hours
>> time_grace = 300 # 5 minutes
>>
>> # The labels to be used for each observation type
>> [[[Labels]]]
>>
>> # Set to hemisphere abbreviations suitable for your location:
>> hemispheres = N, S, E, W
>>
>> # Formats to be used for latitude whole degrees, longitude
>> whole
>> # degrees, and minutes:
>> latlon_formats = %02d, %03d, %05.2f
>>
>> # Generic labels, keyed by an observation type.
>> [[[[Generic]]]]
>> barometer = Barometer
>> dewpoint = Dew Point
>> ET = ET
>> heatindex = Heat Index
>> inHumidity = Inside Humidity
>> inTemp = Inside Temperature
>> outHumidity = Humidity
>> outTemp = Outside Temperature
>> radiation = Radiation
>> rain = Rain
>> rainRate = Rain Rate
>> UV = UV Index
>> windDir = Wind Direction
>> windGust = Gust Speed
>> windGustDir = Gust Direction
>> windSpeed = Wind Speed
>> windchill = Wind Chill
>> windgustvec = Gust Vector
>> windvec = Wind Vector
>> extraTemp1 = Temperature1
>> extraTemp2 = Temperature2
>> extraTemp3 = Temperature3
>>
>> # Sensor status indicators
>>
>> rxCheckPercent = Signal Quality
>> txBatteryStatus = Transmitter Battery
>> windBatteryStatus = Wind Battery
>> rainBatteryStatus = Rain Battery
>> outTempBatteryStatus = Outside Temperature Battery
>> inTempBatteryStatus = Inside Temperature Battery
>> consBatteryVoltage = Console Battery
>> heatingVoltage = Heating Battery
>> supplyVoltage = Supply Voltage
>> referenceVoltage = Reference Voltage
>>
>> [[[Almanac]]]
>>
>> # The labels to be used for the phases of the moon:
>> moon_phases = New, Waxing crescent, First quarter, Waxing
>> gibbous, Full, Waning gibbous, Last quarter, Waning crescent
>>
>>
>> ##############################################################################
>>
>> # This service acts as a filter, converting the unit system coming from
>> # the hardware to a unit system in the database.
>>
>> [StdConvert]
>>
>> # The target_unit affects only the unit system in the database. Once
>> # chosen it cannot be changed without converting the entire database.
>> # Modification of target_unit after starting weewx will result in
>> # corrupt data - the database will contain a mix of US and METRIC
>> data.
>> #
>> # The value of target_unit does not affect the unit system for
>> # reporting - reports can display US, Metric, or any combination of
>> units.
>> #
>> # In most cases, target_unit should be left as the default: US
>> #
>> # In particular, those migrating from a standard wview installation
>> # should use US since that is what the wview database contains.
>>
>> # DO NOT MODIFY THIS VALUE UNLESS YOU KNOW WHAT YOU ARE DOING!
>> target_unit = US # Options are 'US', 'METRICWX', or 'METRIC'
>>
>>
>> ##############################################################################
>>
>> # This section can adjust data using calibration expressions.
>>
>> [StdCalibrate]
>>
>> [[Corrections]]
>> # For each type, an arbitrary calibration expression can be given.
>> # It should be in the units defined in the StdConvert section.
>> # Example:
>> foo = foo + 0.2
>>
>>
>> ##############################################################################
>>
>> # This section is for quality control checks. If units are not
>> specified,
>> # values must be in the units defined in the StdConvert section.
>>
>> [StdQC]
>>
>> [[MinMax]]
>> barometer = 26, 32.5, inHg
>> pressure = 24, 34.5, inHg
>> outTemp = -40, 120, degree_F
>> inTemp = 10, 120, degree_F
>> outHumidity = 0, 100
>> inHumidity = 0, 100
>> windSpeed = 0, 120, mile_per_hour
>> rain = 0, 10, inch
>>
>>
>> ##############################################################################
>>
>> # This section controls the origin of derived values.
>>
>> [StdWXCalculate]
>>
>> [[Calculations]]
>> # How to calculate derived quantities. Possible values are:
>> # hardware - use the value provided by hardware
>> # software - use the value calculated by weewx
>> # prefer_hardware - use value provide by hardware if available,
>> # otherwise use value calculated by weewx
>>
>> pressure = prefer_hardware
>> barometer = prefer_hardware
>> altimeter = prefer_hardware
>> windchill = prefer_hardware
>> heatindex = prefer_hardware
>> dewpoint = prefer_hardware
>> inDewpoint = prefer_hardware
>> rainRate = prefer_hardware
>>
>>
>> ##############################################################################
>>
>> # For hardware that supports it, this section controls how often the
>> # onboard clock gets updated.
>>
>> [StdTimeSynch]
>>
>> # How often to check the weather station clock for drift (in seconds)
>> clock_check = 14400
>>
>> # How much it can drift before we will correct it (in seconds)
>> max_drift = 5
>>
>>
>> ##############################################################################
>>
>> # This section is for configuring the archive service.
>>
>> [StdArchive]
>>
>> # If the station hardware supports data logging then the archive
>> interval
>> # will be downloaded from the station. Otherwise, specify it (in
>> seconds).
>> archive_interval = 300
>>
>> # If possible, new archive records are downloaded from the station
>> # hardware. If the hardware does not support this, then new archive
>> # records will be generated in software.
>> # Set the following to "software" to force software record generation.
>> record_generation = hardware
>>
>> # Whether to include LOOP data in hi/low statistics
>> loop_hilo = True
>>
>> # The data binding used to save archive records
>> data_binding = wx_binding
>>
>>
>> ##############################################################################
>>
>> # This section binds a data store to a database.
>>
>> [DataBindings]
>>
>> [[wx_binding]]
>> # The database must match one of the sections in [Databases].
>> # This is likely to be the only option you would want to change.
>> database = archive_sqlite
>> # The name of the table within the database
>> table_name = archive
>> # The manager handles aggregation of data for historical summaries
>> manager = weewx.manager.DaySummaryManager
>> # The schema defines the structure of the database.
>> # It is *only* used when the database is created.
>> schema = schemas.wview_extended.schema
>>
>>
>> ##############################################################################
>>
>> # This section defines various databases.
>>
>> [Databases]
>>
>> # A SQLite database is simply a single file
>> [[archive_sqlite]]
>> database_name = weewx.sdb
>> database_type = SQLite
>>
>> # MySQL
>> [[archive_mysql]]
>> database_name = weewx
>> database_type = MySQL
>>
>>
>> ##############################################################################
>>
>> # This section defines defaults for the different types of databases.
>>
>> [DatabaseTypes]
>>
>> # Defaults for SQLite databases
>> [[SQLite]]
>> driver = weedb.sqlite
>> # Directory in which the database files are located
>> SQLITE_ROOT = /home/weewx/archive
>>
>> # Defaults for MySQL databases
>> [[MySQL]]
>> driver = weedb.mysql
>> # The host where the database is located
>> host = localhost
>> # The user name for logging in to the host
>> user = XXX obfuscated by wee_debug XXX
>> # The password for the user name (quotes guard against parsing
>> errors)
>> password = XXX obfuscated by wee_debug XXX
>>
>>
>> ##############################################################################
>>
>> # This section configures the internal weewx engine.
>>
>> [Engine]
>>
>> [[Services]]
>> # This section specifies the services that should be run. They are
>> # grouped by type, and the order of services within each group
>> # determines the order in which the services will be run.
>> prep_services = weewx.engine.StdTimeSynch
>> data_services = ,
>> process_services = weewx.engine.StdConvert,
>> weewx.engine.StdCalibrate, weewx.engine.StdQC,
>> weewx.wxservices.StdWXCalculate
>> archive_services = weewx.engine.StdArchive
>> restful_services = weewx.restx.StdStationRegistry,
>> weewx.restx.StdWunderground, weewx.restx.StdPWSweather,
>> weewx.restx.StdCWOP, weewx.restx.StdWOW, weewx.restx.StdAWEKAS
>> report_services = weewx.engine.StdPrint, weewx.engine.StdReport
>>
>>
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/weewx-user/425566df-bffa-428e-8e96-77620c2a6130n%40googlegroups.com.
