I the linux box i had success. installation of the intercept driver does
not disable the simulator.
Now i have a healthy startup log, and the web page just says "success",
there is not display like with the simulator.
what do i have to do next pls
weewx[1369] INFO user.interceptor: driver version is 0.53
weewx[1369] INFO user.interceptor: device type: observer
weewx[1369] INFO user.interceptor: mode is listen
weewx[1369] INFO user.interceptor: listen on :80
weewx[1369] INFO user.interceptor: sensor map: {'pressure': 'pressure',
'barometer': 'barometer', 'outHumidity': 'humidity_out', 'inHumidity':
'humidity_in', 'outTemp': 'temperature_out', 'inTemp': 'temperature_in',
'windSpeed': 'wind_speed', 'windGust': 'wind_gust', 'windDir': 'wind_dir',
'windGustDir': 'wind_gust_dir', 'radiation': 'solar_radiation', 'dewpoint':
'dewpoint', 'windchill': 'windchill', 'rain': 'rain', 'rainRate':
'rain_rate', 'UV': 'uv', 'txBatteryStatus': 'battery', 'extraTemp1':
'temperature_1', 'extraTemp2': 'temperature_2', 'extraTemp3':
'temperature_3', 'extraHumid1': 'humidity_1', 'extraHumid2': 'humidity_2',
'soilTemp1': 'soil_temperature_1', 'soilTemp2': 'soil_temperature_2',
'soilMoist1': 'soil_moisture_1', 'soilMoist2': 'soil_moisture_2',
'soilMoist3': 'soil_moisture_3', 'soilMoist4': 'soil_moisture_4',
'leafWet1': 'leafwetness_1', 'leafWet2': 'leafwetness_2', 'pm2_5': 'pm2_5',
'extraTemp4': 'temperature_4', 'extraTemp5': 'temperature_5', 'extraTemp6':
'temperature_6', 'extraTemp7': 'temperature_7', 'extraTemp8':
'temperature_8', 'extraHumid3': 'humidity_3', 'extraHumid4': 'humidity_4',
'extraHumid5': 'humidity_5', 'extraHumid6': 'humidity_6', 'extraHumid7':
'humidity_7', 'extraHumid8': 'humidity_8', 'soilTemp3':
'soil_temperature_3', 'soilTemp4': 'soil_temperature_4'}
weewx[1369] INFO weewx.engine: StdConvert target unit is 0x1
weewx[1369] INFO weewx.engine: Archive will use data binding wx_binding
weewx[1369] INFO weewx.engine: Record generation will be attempted in
'hardware'
eapema78g weewx[1369] INFO weewx.engine: Using archive interval of 300
seconds (specified in weewx configuration)
weewx[1369] INFO weewx.restx: StationRegistry: Registration not requested.
weewx[1369] INFO weewx.restx: Wunderground: Posting not enabled.
weewx[1369] INFO weewx.restx: PWSweather: Posting not enabled.
weewx[1369] INFO weewx.restx: CWOP: Posting not enabled.
weewx[1369] INFO weewx.restx: WOW: Posting not enabled.
weewx[1369] INFO weewx.restx: AWEKAS: Posting not enabled.
weewx[1369] INFO __main__: Starting up weewx version 4.3.0
weewx[1369] INFO weewx.engine: Using binding 'wx_binding' to database
'weewx.sdb'
weewx[1369] INFO weewx.manager: Starting backfill of daily summaries
weewx[1369] INFO weewx.engine: Starting main packet loop.
On Friday, January 15, 2021 at 8:43:05 PM UTC+1 [email protected] wrote:
> Please post the startup log (the first bunch of lines of the weewx log
> when it first starts up) so we can see which driver it is using
>
> On Friday, January 15, 2021 at 10:03:21 a.m. UTC-8 [email protected]
> wrote:
>
>> yeh, i figured that out in the end - thanks.
>>
>> I got the simulator running on both feebsd (nginx) and kubuntu (apache2)
>> and
>> i have installed the interceptor on both with the instructions in her
>> https://github.com/matthewwall/weewx-interceptor
>> i set to observer for the Fine Offset WH2900C but it is still showing me
>> the Simulator on both firefox and chrome.
>> I have tried clearing the cache and restarting, but even from a fresh
>> machine it shows the simulator.
>>
>> On Friday, January 15, 2021 at 4:56:04 PM UTC+1 [email protected] wrote:
>>
>>> You need to run a web server on the local machine (jail) to be able to
>>> view the files generated and placed in the public_html directory.
>>>
>>> OR
>>>
>>> You need to upload the generated files to another machine that acts as a
>>> web server. This can be done with the ftp or rsync reports
>>>
>>> On Friday, January 15, 2021 at 5:20:08 a.m. UTC-8 [email protected]
>>> wrote:
>>>
>>>> the process is definitely running. Do I have to add some user
>>>> permissions for the public_html directory?
>>>> i installed into path /usr/local/share/weewx
>>>>
>>>> On Friday, January 15, 2021 at 12:29:52 PM UTC+1 S R wrote:
>>>>
>>>>> ok. thanks guys. i deleted the jail and started again per your
>>>>> instructions. everything installed without errors and I've loaded the
>>>>> startup scrip and the service starts.
>>>>> i can ping the weewx and ping from the weewx jail to the internet.
>>>>> if i try to reach via the browser i get Refused to Connect
>>>>> On Friday, January 15, 2021 at 2:14:23 AM UTC+1 [email protected]
>>>>> wrote:
>>>>>
>>>>>> Using pip to install python packages under FreeBSD isn't a great
>>>>>> idea. Freshports can keep everything up to date for you. I've been
>>>>>> running
>>>>>> weewx on my FreeBSD server for several years.
>>>>>>
>>>>>> On Thursday, January 14, 2021 at 5:43:24 PM UTC-6 [email protected]
>>>>>> wrote:
>>>>>>
>>>>>>> that didn't work in 2.
>>>>>>> I managed to install python37 and pip
>>>>>>> i then had to install with the commands below and follow the
>>>>>>> packages per debian10 instructions
>>>>>>> pip install configobj
>>>>>>> pip install serial
>>>>>>> pip install usb
>>>>>>> pip install pip
>>>>>>> pip install cheetah3
>>>>>>> pip install ephem
>>>>>>>
>>>>>>> But i get an error with
>>>>>>> pip install pil - "could not find a package that satisfies the
>>>>>>> requirement pil"
>>>>>>> Do i need pil?
>>>>>>>
>>>>>>> I have a WH2900 Fine Offset and in the forums it talks about using
>>>>>>> the interception driver, but this is not an option during install.
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> On Thursday, January 14, 2021 at 9:55:30 PM UTC+1 [email protected]
>>>>>>> wrote:
>>>>>>>
>>>>>>>> I have used weewx on FreeNAS / TrueNAS for many years and it works
>>>>>>>> well, for hardware that sends loop data to an IP address. Have not
>>>>>>>> tried
>>>>>>>> it with usb hardware.
>>>>>>>>
>>>>>>>> 1. Create and run weewx in it's own standard jail. Given that you
>>>>>>>> want to play with FreeBSD I assume you are familiar with jails and you
>>>>>>>> can
>>>>>>>> handle this. All further instructions assume that you are working
>>>>>>>> within
>>>>>>>> the active running jail.
>>>>>>>> 2. Python packages are named a little different than linux
>>>>>>>> distributions.
>>>>>>>> a) Start by installing python3 using pkg command. Available
>>>>>>>> package names are python36, python37, python38, python39. Further
>>>>>>>> instruction will assume you installed python37
>>>>>>>> b) Install py37-cheetah3 using the pkg command
>>>>>>>> c) Install py37-configobj
>>>>>>>> d) Install py37-pillow
>>>>>>>> e) Install py37-sqlite3, assuming you are using sqlite database
>>>>>>>> 3. Install weewx using the setup.py method
>>>>>>>> 4. To run weewx directly con command line, cd to /home/weewx and
>>>>>>>> use the ./bin/weewxd command, run this as su.
>>>>>>>> 5. To start weewx automatically from at startup, copy the attached
>>>>>>>> script to */usr/local/etc/rc.d/*
>>>>>>>> 6. Add the following line *weewx_enable="YES"* to the
>>>>>>>> */etc/rc.conf* file. Now weewx will start automatically and you
>>>>>>>> can start and stop the service with *service weewx start* or *service
>>>>>>>> weewx stop* command
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> On Thursday, January 14, 2021 at 10:04:06 a.m. UTC-8
>>>>>>>> [email protected] wrote:
>>>>>>>>
>>>>>>>>>
>>>>>>>>> I have a TrueNAS box and want to install in a FreeBSD jail. I'm a
>>>>>>>>> complete knob, can anyone help with instructions for installing on
>>>>>>>>> FreeBSD.
>>>>>>>>> Sadly, such great document for Linux, but none for FreeBSD (although
>>>>>>>>> i see
>>>>>>>>> there is a startup script, for those who know how to get that far)
>>>>>>>>>
>>>>>>>>
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/weewx-user/6fd7f6c8-68a5-43af-baf7-a87905e9e18dn%40googlegroups.com.
