I’m not sure why you keep mentioning simulator (as in extension/simulator).
Do you have the following line in your weewx.conf? driver = simulator If so, it should not be there. > On Jan 23, 2021, at 8:49 AM, Invisible Man <[email protected]> wrote: > > > Hello, > > My outside temperature, my barometer, my dew point, my gust wind are > completely crazy! > > Important: this happened after an upgrade from 4.2.0 to 4.3.0, where I had to > install the WMR200 extension as it is no longer in the main weewx in 4.3.0. > So please consider something might be wrong with my config for the > extension/simulator. > > Also, I used to use Python 2.7 and have shifted to Python 3.x. So, that also > might be a source of issue. > > My configuration is : > WMR200 station (using weewx-wmr200 extension) > My original WMR200 temperature sensor is KO and I have "replaced" it with a > DIY sensor that sends its data using MQTT. Thus the MQTT extension. > My wind battery and my UV battery are low (but I wonder if it's not just a > detection issue, because they are always low even when I change batteries). > I attach my weewx.conf > > Temperature: > > The current outside temperature is 9°C. You see below that I receive a MQTT > message saying it is 9.14. Unit is degrees celsius. This is okay. > > Jan 23 17:10:22 vegan weewx[18515] DEBUG user.MQTTSubscribe: (Service) > MessageCallbackProvider data-> incoming topic: temperature/jardin, QOS: 0, > retain: 0, payload: b'9.14' > Jan 23 17:10:22 vegan weewx[18515] DEBUG user.MQTTSubscribe: (Service) > TopicManager data-> incoming temperature/jardin: outTemp: 9.14 > Jan 23 17:10:24 vegan weewx[18515] DEBUG user.MQTTSubscribe: (Service) > TopicManager data-> outgoing temperature/jardin: dateTime: > 1611418222.9963524, outTemp: 9.14, usUnits: 16 > > I also have an 'accumulated temperature'. Don't know exactly what that is, > and I'm surprised usUnits is 1. Strange. > > Jan 23 17:10:24 vegan weewx[18515] DEBUG user.MQTTSubscribe: (Service) > TopicManager data-> outgoing accumulated temperature/jardin: dateTime: > 1611418225.0, outTemp: 48.452, usUnits: 1 > > A bit later, I have this kind of messages: > > - outTemp is 48.452. For some reason, this is Fahrenheit. Indeed 48.452F=9C. > > Jan 23 17:10:24 vegan weewx[18515] DEBUG user.MQTTSubscribe: (Service) data-> > final packet is 2021-01-23 17:10:25 CET (1611418225): barometer: > 31.042868851248706, consBatteryVoltage: 12.564392224893147, dateTime: > 1611418225.0, heatingVoltage: 12.0, inHumidity: 27.78003341310109, inTemp: > 64.10998329344946, inTempBatteryStatus: 0, outHumidity: 78.28606553746118, > outTemp: 48.452, outTempBatteryStatus: 0, pressure: 31.042868851248706, > radiation: 46.14176895043754, rain: 0, rainBatteryStatus: 0, > referenceVoltage: 12.0, rxCheckPercent: 36.11042934389155, supplyVoltage: > 12.0, txBatteryStatus: 0, usUnits: 1, UV: 0.6459847653061255, > windBatteryStatus: 0, windDir: 349.7163932247671, windGust: > 0.34278689250776395, windGustDir: 349.7163932247671, windSpeed: > 0.28565574375646996 > > My report in my template displays $current.outTemp to "-0.9°C" !!! This not > 9C, nor 48F :( > > Barometer > > On the WMR console, barometer indicates approx 980 mbar. > Why does this log say 31??? Other unit? > > Jan 23 17:10:24 vegan weewx[18515] DEBUG user.MQTTSubscribe: (Service) data-> > final packet is 2021-01-23 17:10:25 CET (1611418225): barometer: > 31.042868851248706, > > My report displays $current.barometer to 1053 mbar !!! This is not 980 !! > > Wind gust > > I have currently 3/5 km/h. But my report says 0 km/h. It could happen that at > a given time it is zero, but still I am suspicious about the value. > > I think there's a configuration issue somewhere in my files. This is crazy. > > > -- > You received this message because you are subscribed to the Google Groups > "weewx-user" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/weewx-user/477cec36-536b-4d10-a095-ebc732e09548n%40googlegroups.com. > <weewx.conf> -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/E3C73A94-B412-4E1B-89AB-5CE6EF3AC700%40johnkline.com.
