i have setup for loopdata
[LoopData]
[[FileSpec]]
loop_data_dir = .
filename = loop-data.txt
[[Formatting]]
target_report = LoopDataReport
[[LoopFrequency]]
seconds = 30
[[RsyncSpec]]
enable = true
remote_server = ftpupload.net
remote_user = epiz_27298028
remote_dir = /htdocs/test
compress = true
log_success = true
ssh_options = -o ConnectTimeout=1
timeout = 1
skip_if_older_than = 3
[[Include]]
fields = trend.outTemp, trend.barometer.desc, current.barometer,
current.dateTime.raw, current.dewpoint, current.dewpoint.formatted,
current.heatindex, current.outHumidity, current.outTemp,
current.outTemp.formatted, current.rain, current.rainRate,
current.rainRate.formatted, current.windchill,
current.windDir.ordinal_compass, current.windSpeed,
current.windSpeed.formatted, current.windSpeed.raw,
10m.outTemp.max.formatted, 10m.outTemp.min.formatted,
10m.rain.sum.formatted, 10m.wind.rms.formatted, 10m.windGust.max,
10m.windGust.max.formatted, day.outTemp.max.formatted,
day.outTemp.min.formatted, day.rain.sum, day.rain.sum.formatted,
day.wind.rms.formatted, day.windGust.max, day.windGust.max.formatted,
week.outTemp.max.formatted, week.outTemp.min.formatted,
week.rain.sum.formatted, week.wind.rms.formatted,
week.windGust.max.formatted, month.outTemp.max.formatted,
month.outTemp.min.formatted, month.rain.sum.formatted,
month.wind.rms.formatted, month.windGust.max.formatted,
year.outTemp.max.formatted, year.outTemp.min.formatted,
year.rain.sum.formatted, year.wind.rms.formatted,
year.windGust.max.formatted, rainyear.outTemp.max.formatted,
rainyear.outTemp.min.formatted, rainyear.rain.sum.formatted,
rainyear.wind.rms.formatted, rainyear.windGust.max.formatted
[[BarometerTrendDescriptions]]
RISING_VERY_RAPIDLY = Rising Very Rapidly
RISING_QUICKLY = Rising Quickly
RISING = Rising
RISING_SLOWLY = Rising Slowly
STEADY = Steady
FALLING_SLOWLY = Falling Slowly
FALLING = Falling
FALLING_QUICKLY = Falling Quickly
FALLING_VERY_RAPIDLY = Falling Very Rapidly
Στις Τρίτη, 26 Ιανουαρίου 2021 στις 9:12:55 μ.μ. UTC+2, ο χρήστης
[email protected] έγραψε:
> As the README states:
>
> - If you need the loop-data.txt file pushed to a remote webserver, you
> will also need to fill in the RsyncSpec fields; but one can fill that
> in later, after LoopData is up and running.
>
>
> It appears loopdata is up and running and working on the local machine.
> Have you set up rsync for loopdata?
>
> Please see the following sections of the README:
>
>
> https://github.com/chaunceygardiner/weewx-loopdata#entries-in-loopdata-sections-of-weewxconf
>
>
> https://github.com/chaunceygardiner/weewx-loopdata#rsync-isnt-working-for-me-help
>
>
> https://github.com/chaunceygardiner/weewx-loopdata#do-i-have-to-use-rsync-to-sync-loop-datatxt-to-a-remote-server
>
>
> https://github.com/chaunceygardiner/weewx-loopdata#what-about-those-rsync-errors-in-the-log
>
> On Jan 26, 2021, at 10:34 AM, Δημήτρης Βήχος <[email protected]> wrote:
>
> its correct i have remote server. in remote server uploading the
> loop-data.txt but uploadind every 5 minutes .
>
>
>
> Στις Τρίτη, 26 Ιανουαρίου 2021 στις 6:20:42 μ.μ. UTC+2, ο χρήστης
> [email protected] έγραψε:
>
>> OK, the behavior we are seeing leads me to believe your web server is on
>> a remote machine; i.e., not on the same machine as weewx. Is that correct?
>> If so, you’ll need to use rsync by filling out and enabling it under:
>>
>> [LoopData]
>> [[RsyncSpec]]
>>
>>
>> On Jan 26, 2021, at 7:57 AM, Δημήτρης Βήχος <[email protected]> wrote:
>>
>> well the actuall /loopdata localhost/weewx/loopdata , refreshing
>> every 60 seconds its ok. but in weather page refreshing every 5 minutes
>>
>> Στις Τρίτη, 26 Ιανουαρίου 2021 στις 5:45:32 μ.μ. UTC+2, ο χρήστης jo...@
>> johnkline.com έγραψε:
>>
>>> Again, how often does your driver write loop records?
>>>
>>> loop-data.txt is not written in reporting cycles. I am asking you to
>>> look at the actual loop-data.txt file that is written to the .../loopdata
>>> directory. How often does the contents of that file change.
>>>
>>> Also, please show what entries you are seeing in the log every one
>>> minute.
>>>
>>> On Jan 26, 2021, at 7:37 AM, Δημήτρης Βήχος <[email protected]> wrote:
>>>
>>> loop-data.txt updates every 5 minutes in web page. but in log see
>>> loop-data.txt every 60 secs
>>>
>>>
>>>
>>> Στις Τρίτη, 26 Ιανουαρίου 2021 στις 5:19:17 μ.μ. UTC+2, ο χρήστης
>>> [email protected] έγραψε:
>>>
>>>> How often does your driver write loop records?
>>>> Would you please check the actual loop-data.txt file, rather than the
>>>> skin’s report, to see if that file is being updated on every loop record?
>>>>
>>>> On Jan 26, 2021, at 7:15 AM, Δημήτρης Βήχος <[email protected]>
>>>> wrote:
>>>>
>>>> the loop-data.txt
>>>>
>>>>
>>>> https://kairos.moudania.com/kolxiko/loopdata/
>>>>
>>>> Στις Τρίτη, 26 Ιανουαρίου 2021 στις 5:07:58 μ.μ. UTC+2, ο χρήστης
>>>> [email protected] έγραψε:
>>>>
>>>>> > but data refresh every 5 minutes, with the rest skins of weewx
>>>>>
>>>>> Exactly what data are you talking about that refreshes every five
>>>>> minutes?
>>>>>
>>>>> On Jan 26, 2021, at 6:02 AM, Δημήτρης Βήχος <[email protected]>
>>>>> wrote:
>>>>>
>>>>> i was easily installed the loop-data extension yesterday. i use weewx
>>>>> 4.3 with wh1080 weather station, but data refresh every 5 minutes, with
>>>>> the
>>>>> rest skins of weewx
>>>>>
>>>>>
>>>>>
>>>>> Στις Πέμπτη, 26 Νοεμβρίου 2020 στις 6:46:10 μ.μ. UTC+2, ο χρήστης
>>>>> [email protected] έγραψε:
>>>>>
>>>>>> Thanks for letting me know.
>>>>>>
>>>>>> On Nov 26, 2020, at 7:32 AM, [email protected] <[email protected]>
>>>>>> wrote:
>>>>>>
>>>>>> Hi John,
>>>>>>
>>>>>> Works great. Here is what I added to the loop-data.py
>>>>>>
>>>>>> Line 735 self.ten_min_packets, self.cfg.ten_min_obstypes)
>>>>>> # Added to allow specific null keys if no data
>>>>>> available in loop packet
>>>>>> must_have_keys = [ 'current.dateTime',
>>>>>> 'current.extraTemp1.raw', 'current.extraTemp2.raw',
>>>>>> 'current.extraTemp3.raw', 'current.extraHumid1.raw',
>>>>>> 'current.extraHumid2.raw', 'current.extraHumid3.raw' ]
>>>>>> for must_have_key in must_have_keys:
>>>>>> if must_have_key not in loopdata_pkt:
>>>>>> loopdata_pkt[must_have_key] = None
>>>>>>
>>>>>> Thanks!
>>>>>> On Wednesday, November 25, 2020 at 7:06:46 AM UTC-8
>>>>>> [email protected] wrote:
>>>>>>
>>>>>>> Awesome! This is sort of what I suspected that most use cases, NULL
>>>>>>> is a problem. I can just hard code the entire Davis loop which will
>>>>>>> work
>>>>>>> for my needs.
>>>>>>>
>>>>>>> Thanks you,
>>>>>>>
>>>>>>> Geoff
>>>>>>>
>>>>>>> On Wednesday, November 25, 2020 at 6:45:44 AM UTC-8
>>>>>>> [email protected] wrote:
>>>>>>>
>>>>>>>> In the general case, including keys in the loop packet for
>>>>>>>> non-existent data is not a good idea. This would break existing code
>>>>>>>> (e.g., JavaScript code I use in my skins).
>>>>>>>>
>>>>>>>> You could easily fork the extension and add in what you need. At
>>>>>>>> line 736, right before write_packet_to_file is called, simply check
>>>>>>>> for the
>>>>>>>> keys you need to exist, and add them if they are not there. The
>>>>>>>> following
>>>>>>>> should work. Just replace the keys I’ve listed with the ones you need
>>>>>>>> in
>>>>>>>> the packet.
>>>>>>>>
>>>>>>>> must_have_keys = [ 'current.outTemp', 'current.outHumidity' ]
>>>>>>>> for must_have_key in must_have_keys:
>>>>>>>> if must_have_key not in loopdata_pkt:
>>>>>>>> loopdata_pkt[must_have_key] = None
>>>>>>>>
>>>>>>>> If you don’t want to hard code the keys, you’ll have a bigger task;
>>>>>>>> but you could just copy the code used to process the ‘fields’ entry in
>>>>>>>> the
>>>>>>>> LoopData section of weewx.conf.
>>>>>>>>
>>>>>>>> Cheers,
>>>>>>>> John
>>>>>>>>
>>>>>>>> On Nov 24, 2020, at 8:54 PM, [email protected] <
>>>>>>>> [email protected]> wrote:
>>>>>>>>
>>>>>>>> Hi John,
>>>>>>>>
>>>>>>>>
>>>>>>>> This is a great extension. I'm wondering if there is a way to be
>>>>>>>> able to include sending data that is null or none for a particular
>>>>>>>> key?
>>>>>>>> I'm using a davis vantage pro2, weewx 4.2. I'd like to use this to
>>>>>>>> make a
>>>>>>>> JSON output that can be ingested into a home automation system. So far
>>>>>>>> it
>>>>>>>> works great as long as the data is available to be sent, but I have
>>>>>>>> not
>>>>>>>> figured out how to send a key with a Null or none value. It looks like
>>>>>>>> a
>>>>>>>> key with a null or none value gets cleaved off the JSON output. If a
>>>>>>>> battery dies on a sensor and it just disappears from the JSON output,
>>>>>>>> that
>>>>>>>> is much harder for the HA system to handle than a null, none or zero
>>>>>>>> value.
>>>>>>>>
>>>>>>>> On Monday, November 16, 2020 at 2:57:13 PM UTC-8
>>>>>>>> [email protected] wrote:
>>>>>>>>
>>>>>>>>> A fix is released (v2.7.2). There is no hurry to install the new
>>>>>>>>> release; but once you’ve installed it, you can remove the field I
>>>>>>>>> asked you
>>>>>>>>> to add to weewx.conf.
>>>>>>>>>
>>>>>>>>> On Nov 16, 2020, at 9:04 AM, Geni <[email protected]> wrote:
>>>>>>>>>
>>>>>>>>> Ok, works
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> Thank you
>>>>>>>>>
>>>>>>>>> [email protected] schrieb am Montag, 16. November 2020 um
>>>>>>>>> 16:05:21 UTC+1:
>>>>>>>>>
>>>>>>>>>> I can duplicate this problem and will issue a fix.
>>>>>>>>>>
>>>>>>>>>> In the meantime, you can add:
>>>>>>>>>> rainyear.outTemp.max
>>>>>>>>>> to the fields clause in the LoopData section of weewx.conf?
>>>>>>>>>>
>>>>>>>>>> That will stop this problem. If you get similar errors for other
>>>>>>>>>> periods where you have no fields listed, you’ll have to temporarily
>>>>>>>>>> add a
>>>>>>>>>> field for those periods also.
>>>>>>>>>>
>>>>>>>>>> I should have a fix shortly. I don’t know that this is related
>>>>>>>>>> to WeeWX 4.2, not that that really matters.
>>>>>>>>>>
>>>>>>>>>> On Nov 16, 2020, at 2:45 AM, Geni <[email protected]> wrote:
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> Hi john
>>>>>>>>>> since weewx 4.2.0 the loop-data.txt is no longer generated?
>>>>>>>>>> regards Geni
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> --
>>>>>>>>>> You received this message because you are subscribed to the
>>>>>>>>>> Google Groups "weewx-user" group.
>>>>>>>>>> To unsubscribe from this group and stop receiving emails from it,
>>>>>>>>>> send an email to [email protected].
>>>>>>>>>> To view this discussion on the web visit
>>>>>>>>>> https://groups.google.com/d/msgid/weewx-user/3f89791f-c06b-43d1-beac-0afa58df59d6n%40googlegroups.com
>>>>>>>>>>
>>>>>>>>>> <https://groups.google.com/d/msgid/weewx-user/3f89791f-c06b-43d1-beac-0afa58df59d6n%40googlegroups.com?utm_medium=email&utm_source=footer>
>>>>>>>>>> .
>>>>>>>>>> <syslog.txt>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>> --
>>>>>>>>> You received this message because you are subscribed to the Google
>>>>>>>>> Groups "weewx-user" group.
>>>>>>>>> To unsubscribe from this group and stop receiving emails from it,
>>>>>>>>> send an email to [email protected].
>>>>>>>>>
>>>>>>>>> To view this discussion on the web visit
>>>>>>>>> https://groups.google.com/d/msgid/weewx-user/0f6cb227-1cdd-4fbb-9cf9-6f4c59521262n%40googlegroups.com
>>>>>>>>>
>>>>>>>>> <https://groups.google.com/d/msgid/weewx-user/0f6cb227-1cdd-4fbb-9cf9-6f4c59521262n%40googlegroups.com?utm_medium=email&utm_source=footer>
>>>>>>>>> .
>>>>>>>>>
>>>>>>>>>
>>>>>>>> --
>>>>>>>> You received this message because you are subscribed to the Google
>>>>>>>> Groups "weewx-user" group.
>>>>>>>> To unsubscribe from this group and stop receiving emails from it,
>>>>>>>> send an email to [email protected].
>>>>>>>>
>>>>>>>> To view this discussion on the web visit
>>>>>>>> https://groups.google.com/d/msgid/weewx-user/0611c189-0c9f-4ab6-b6be-4d797e80bb96n%40googlegroups.com
>>>>>>>>
>>>>>>>> <https://groups.google.com/d/msgid/weewx-user/0611c189-0c9f-4ab6-b6be-4d797e80bb96n%40googlegroups.com?utm_medium=email&utm_source=footer>
>>>>>>>> .
>>>>>>>>
>>>>>>>>
>>>>>> --
>>>>>> You received this message because you are subscribed to the Google
>>>>>> Groups "weewx-user" group.
>>>>>> To unsubscribe from this group and stop receiving emails from it,
>>>>>> send an email to [email protected].
>>>>>>
>>>>>> To view this discussion on the web visit
>>>>>> https://groups.google.com/d/msgid/weewx-user/e17127d4-1177-4b34-b624-78d34bc53501n%40googlegroups.com
>>>>>>
>>>>>> <https://groups.google.com/d/msgid/weewx-user/e17127d4-1177-4b34-b624-78d34bc53501n%40googlegroups.com?utm_medium=email&utm_source=footer>
>>>>>> .
>>>>>>
>>>>>>
>>>>> --
>>>>> You received this message because you are subscribed to the Google
>>>>> Groups "weewx-user" group.
>>>>> To unsubscribe from this group and stop receiving emails from it, send
>>>>> an email to [email protected].
>>>>>
>>>>> To view this discussion on the web visit
>>>>> https://groups.google.com/d/msgid/weewx-user/ccc44653-7ba9-467e-b9dc-565b5aff3d02n%40googlegroups.com
>>>>>
>>>>> <https://groups.google.com/d/msgid/weewx-user/ccc44653-7ba9-467e-b9dc-565b5aff3d02n%40googlegroups.com?utm_medium=email&utm_source=footer>
>>>>> .
>>>>>
>>>>>
>>>> --
>>>> You received this message because you are subscribed to the Google
>>>> Groups "weewx-user" group.
>>>> To unsubscribe from this group and stop receiving emails from it, send
>>>> an email to [email protected].
>>>>
>>>> To view this discussion on the web visit
>>>> https://groups.google.com/d/msgid/weewx-user/daf9779f-97b6-4e14-9d63-c2e11c9c96b7n%40googlegroups.com
>>>>
>>>> <https://groups.google.com/d/msgid/weewx-user/daf9779f-97b6-4e14-9d63-c2e11c9c96b7n%40googlegroups.com?utm_medium=email&utm_source=footer>
>>>> .
>>>>
>>>>
>>> --
>>> You received this message because you are subscribed to the Google
>>> Groups "weewx-user" group.
>>> To unsubscribe from this group and stop receiving emails from it, send
>>> an email to [email protected].
>>>
>>> To view this discussion on the web visit
>>> https://groups.google.com/d/msgid/weewx-user/4ae26782-d0fe-4533-a08c-67a957ba496fn%40googlegroups.com
>>>
>>> <https://groups.google.com/d/msgid/weewx-user/4ae26782-d0fe-4533-a08c-67a957ba496fn%40googlegroups.com?utm_medium=email&utm_source=footer>
>>> .
>>>
>>>
>> --
>> You received this message because you are subscribed to the Google Groups
>> "weewx-user" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to [email protected].
>>
>> To view this discussion on the web visit
>> https://groups.google.com/d/msgid/weewx-user/be15c12f-b2b7-4d26-80a2-716c25b827d3n%40googlegroups.com
>>
>> <https://groups.google.com/d/msgid/weewx-user/be15c12f-b2b7-4d26-80a2-716c25b827d3n%40googlegroups.com?utm_medium=email&utm_source=footer>
>> .
>>
>>
>> --
> You received this message because you are subscribed to the Google Groups
> "weewx-user" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to [email protected].
>
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/weewx-user/a93e4451-6c47-4128-8bde-bdfdd9b67b91n%40googlegroups.com
>
> <https://groups.google.com/d/msgid/weewx-user/a93e4451-6c47-4128-8bde-bdfdd9b67b91n%40googlegroups.com?utm_medium=email&utm_source=footer>
> .
>
>
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/weewx-user/285d08ac-17b8-4b15-8489-42fe358a0065n%40googlegroups.com.
