Hi, Short answer is it depends. Two key points are the driver you are using (there are two drivers that support the GW1000) and what database schema you are using. Could I ask you to run wee_debug --info <http://weewx.com/docs/utilities.htm#wee_debug_utility> and post the output here so that we can have some understanding of how your system is configured and provide appropriate advice. Before posting the wee_debug output do check it for any sensitive information such as user names, passwords, API keys etc. wee_debug should obfuscate such information but it is not perfect.
Gary On Wednesday, 3 February 2021 at 19:10:21 UTC+10 Thomas Hackler wrote: > > Hello, > > I am using weewx with raspberry pi 3, WeeWX version 4.2.0. I have a > froggit DP1500/GW1000 with a WH3000 and four DP50/WH31 temp/humidity > sensors and one DP100/WN51 for moisture. Weewx only show me three of the > WH31 without humidity. > > How can I add the missing WH31 and WN51 and the humidity values from the > WH31? > > With ecowitt or WU I can see all the sensors and all values. > > I think I have to add the missing sensors somewhere in the configuration > file but I don’t know where? > > Which information from the files do you need? > > Thank you! > > [image: weewx.JPG] > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/496668a3-fe70-420a-a84b-c5b456123987n%40googlegroups.com.
