Hi all,
Ive moved over to the Belchertown skin
but don't see the radiation/uv graph being plotted
I've looked around but can't see if this needs to be enabled or not..
WxStation is s bresser-7in1,it's sniffed via rtl_433 via an MQTT into weex.
which only reports KLux, which I've converted. to w/m2
the output MQTT from weeex looks ok, with solrad and light?
weather/loop {"rain24_mm": "0.0", "maxSolarRad_Wpm2": "337.757415156",
"light": "10.7", "hourRain_mm": "0.0", "dayRain_mm": "0.0",
"rainRate_mm_per_hour": "0.0", "radiation_Wpm2": "84.4551", "dateTime":
"1 612870771.96", "usUnits": "17.0"}
weather/loop {"rain24_mm": "0.0", "maxSolarRad_Wpm2": "337.813494908",
"hourRain_mm": "0.0", "sensors/WH25/id": "118.0", "dayRain_mm": "0.0",
"rainRate_mm_per_hour": "0.0", "dateTime": "1612870778.66", "us
Units": "17.0"}
weather/loop {"rain24_mm": "0.0", "maxSolarRad_Wpm2": "337.813494908",
"sensors/WH25/battery_ok": "1.0", "dayRain_mm": "0.0",
"rainRate_mm_per_hour": "0.0", "dateTime": "1612870778.66", "hourRain_mm":
"0.0 ", "usUnits": "17.0"}
weather/loop {"sensors/WH25/temperature_C": "5.8", "rain24_mm": "0.0",
"maxSolarRad_Wpm2": "337.813494908", "hourRain_mm": "0.0", "dayRain_mm":
"0.0", "rainRate_mm_per_hour": "0.0", "dateTime": "1612870778 .66",
"usUnits": "17.0"}
weather/loop {"rain24_mm": "0.0", "maxSolarRad_Wpm2": "337.813494908",
"sensors/WH25/humidity": "60.0", "hourRain_mm": "0.0", "dayRain_mm": "0.0",
"rainRate_mm_per_hour": "0.0", "dateTime": "1612870778.66" ,
"usUnits": "17.0"}
weather/loop {"rain24_mm": "0.0", "maxSolarRad_Wpm2": "337.813529024",
"pressure_mbar": "998.10004", "hourRain_mm": "0.0", "dayRain_mm": "0.0",
"rainRate_mm_per_hour": "0.0", "altimeter_mbar": "1001.398249 6",
"dateTime": "1612870778.66", "usUnits": "17.0"}
weather/loop {"beaufort_count": "2.0", "maxSolarRad_Wpm2": "337.862587567",
"hourRain_mm": "0.0", "windGust_mps": "2.60000646228", "dayRain_mm": "0.0",
"windDir": "84.0", "windSpeed_mps": "2.40000596518",
"rainRate_mm_per_hour": "0.0", "rain24_mm": "0.0", "dateTime":
"1612870784.54", "usUnits": "17.0"}
weather/loop {"rain24_mm": "0.0", "maxSolarRad_Wpm2": "337.862587567",
"hourRain_mm": "0.0", "dayRain_mm": "0.0", "rainRate_mm_per_hour": "0.0",
"sensors/7in1/id": "8618.0", "dateTime": "1612870784.53", "u
sUnits": "17.0"}
weather/loop {"rain24_mm": "0.0", "maxSolarRad_Wpm2": "337.862587567",
"hourRain_mm": "0.0", "dateTime": "1612870784.53", "rainRate_mm_per_hour":
"0.0", "dayRain_mm": "0.0", "outTemp_C": "-0.6", "usUnits": "17.0"}
any thoughts ?
Mark
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/weewx-user/cd4071e1-dc0d-4f06-8371-f045cbf84d17n%40googlegroups.com.
