Hi Tom At #1 you wrote: NOAA reports now use a 'utf8' encoding instead of 'strict_ascii'. This will only affect new installations. Fixes issue #644.
When I look at the skin.conf, utf8 has disappeared as a choice: # Possible encodings include 'html_entities', 'strict_ascii', 'normalized_ascii', normalized_ascii will not show danish characters correct(æåøÆÅØ) >From the NOAA report: normalized_ascii: NAME: Vester Smarken, Bornholm With utf8: NAME: Vester Sømarken, Bornholm Rgds Gert On Saturday, February 6, 2021 at 10:48:39 PM UTC+1 tre...@gmail.com wrote: > My first upgrade of Wewwx (after years on wview). Upgraded from 4.1.1 to > 4.4.0 with Belchertown 1.2 on a Ubuntu 20.04 VM using the setup.py method. > Wow that was smooth... Great software and wonderful community. > > On Thursday, February 4, 2021 at 7:14:28 AM UTC-7 kk44...@gmail.com wrote: > >> Meanwhile I would add, that the update was without problems in my case >> (Ubuntu apt-get upgrade). I use Belchertown skin and some additional >> uploaders. >> >> Vetti52 schrieb am Donnerstag, 4. Februar 2021 um 11:04:43 UTC+1: >> >>> Hi, >>> maybe a new thread would be helpful, because the issue is/was very >>> special and might not be a problem with version 4.4.0: >>> >>> After I realized, that weewx could be run manually, I was inspecting, >>> what was the difference. I had updated to version 4.4.0 and also had an >>> update for my Zigbee device driver (deCONZ). Then I had to reboot the >>> Raspberry Pi and after that the error occured. Finally I realized, that, >>> the /etc/init.d/weewx start failed, with code=exited but no success. I >>> misinterpreted this as that weewx was not running, since there were no >>> syslog entries at all. Repeating to start weewx using the previous >>> interceptor driver did not work either. So I decided to let it run with >>> gw1000 driver, but started it manually with sudo weewxd >>> /etc/weewx/weewx.conf >nul &. This was successful, and went to >>> sleep.... >>> Today I decided to look at this issue again and, instead of killing the >>> manually started weexd properly, I accidently used /etc/init.d/weewx >>> stop, which indeed stopped weewx, but the manually started weewxd >>> continued. After I stopped this too, I realized, that weewx had in fact >>> been started autmatically after reboot, but got stuck, as you say, because >>> of the gw1000 driver. What I did not expect, is, that weewx then did not >>> exit. Any additional starting command therefore failed. I was cind of >>> silly, not to look at that, sorry. After stopping the hanging weewx, I >>> could start weewx as expected, and now it works without any issues. Maybe, >>> it would be better not to start weewx with its init.d script, but with >>> systemctl >>> using a separate weewx.service file which should contain a stanza like >>> >>> [Unit] >>> After=network-online.target >>> >>> that would avoid to start weewx before network is up, which seems to be >>> a crucial step for gw1000. But this should be another thread, I think. >>> >>> Thanks >>> Peter >>> gjr80 schrieb am Mittwoch, 3. Februar 2021 um 20:33:21 UTC+1: >>> >>>> Ok, can you please set debug=1, restart WeeWX as a daemon and post in a >>>> new thread the log through until the failure occurs. >>>> >>>> Gary >>>> >>>> On Thursday, 4 February 2021 at 05:28:00 UTC+10 Vetti52 wrote: >>>> >>>>> just to narrow down my problem: >>>>> >>>>> When starting manually >>>>> weewxd /etc/weewx/weewx.conf >>>>> it works. Starting with >>>>> systemctl start weewx, >>>>> it fails. >>>>> Maybe, I will find out, what makes the difference. But, just in case, >>>>> someone knows the trick, please tell! >>>>> >>>>> Thanks >>>>> -Peter >>>>> >>>>> Vetti52 schrieb am Mittwoch, 3. Februar 2021 um 18:20:07 UTC+1: >>>>> >>>>>> Typo: Upgrade from 4.3.0 to 4.4.0. >>>>>> Version 4.3.0 had no issues so far. >>>>>> >>>>>> Vetti52 schrieb am Mittwoch, 3. Februar 2021 um 18:17:46 UTC+1: >>>>>> >>>>>>> Just upgraded from 4.4.3 to 4.4.0, but it fails. >>>>>>> got this in systemctl status weewx.service: >>>>>>> Feb 03 16:44:25 RaspBee python3[629]: weewx[629] CRITICAL >>>>>>> weewx.engine: **** debug_wind=self.debug_wind) >>>>>>> Feb 03 16:44:25 RaspBee python3[629]: weewx[629] CRITICAL >>>>>>> weewx.engine: **** File "/usr/share/weewx/user/gw1000.py", line >>>>>>> 2166, in __init__ >>>>>>> Feb 03 16:44:25 RaspBee python3[629]: weewx[629] CRITICAL >>>>>>> weewx.engine: **** >>>>>>> lost_contact_log_period=lost_contact_log_period) >>>>>>> Feb 03 16:44:25 RaspBee python3[629]: weewx[629] CRITICAL >>>>>>> weewx.engine: **** File "/usr/share/weewx/user/gw1000.py", line >>>>>>> 2915, in __init__ >>>>>>> Feb 03 16:44:25 RaspBee python3[629]: weewx[629] CRITICAL >>>>>>> weewx.engine: **** ip_port_list = self.discover() >>>>>>> Feb 03 16:44:25 RaspBee python3[629]: weewx[629] CRITICAL >>>>>>> weewx.engine: **** File "/usr/share/weewx/user/gw1000.py", line >>>>>>> 3005, in discover >>>>>>> Feb 03 16:44:25 RaspBee python3[629]: weewx[629] CRITICAL >>>>>>> weewx.engine: **** socket_obj.sendto(packet, >>>>>>> (self.broadcast_address, self.broadcast_port)) >>>>>>> Feb 03 16:44:25 RaspBee python3[629]: weewx[629] CRITICAL >>>>>>> weewx.engine: **** OSError: [Errno 101] Das Netzwerk ist nicht >>>>>>> erreichbar >>>>>>> Feb 03 16:44:25 RaspBee python3[629]: weewx[629] CRITICAL __main__: >>>>>>> Unable to load driver: [Errno 101] Das Netzwerk ist nicht erreichbar >>>>>>> Feb 03 16:44:25 RaspBee python3[629]: weewx[629] CRITICAL >>>>>>> __main__: **** Exiting... >>>>>>> >>>>>>> Hopefully someone knows, what to do. >>>>>>> >>>>>>> Thanks >>>>>>> -Peter >>>>>>> >>>>>>> n0...@n0nb.us schrieb am Dienstag, 2. Februar 2021 um 03:48:05 >>>>>>> UTC+1: >>>>>>> >>>>>>>> Updated this morning on Debian 10.7 and after several minutes of >>>>>>>> updating the DB, everything came up working smooth as silk. >>>>>>>> >>>>>>>> Good show! >>>>>>>> >>>>>>>> - Nate >>>>>>>> >>>>>>>> -- >>>>>>>> >>>>>>>> "The optimist proclaims that we live in the best of all >>>>>>>> possible worlds. The pessimist fears this is true." >>>>>>>> >>>>>>>> Web: https://www.n0nb.us >>>>>>>> Projects: https://github.com/N0NB >>>>>>>> GPG fingerprint: 82D6 4F6B 0E67 CD41 F689 BBA6 FB2C 5130 D55A 8819 >>>>>>>> >>>>>>>> -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/ff73a836-106f-4a62-9c69-4652ad6c40c4n%40googlegroups.com.